Range

Topsealer

Varnishes to protect and enhance microcement, decorative concrete and other continuous coatings against wear, scratches, water and chemicals. Water-based, solvent-based or one-component systems, in matt, satin, gloss or super-matt finish.

  • Interior
  • Exterior
  • Water- or solvent-based
  • Matt to gloss
  • Non-yellowing
System

How the system is applied

  1. 1 Preparation

    Clean, dry surface free of dust and grease. If the substrate requires prior sealing, apply a coat of Presealer.

    Presealer 5L
  2. 2 Mix A+B

    In two-component systems, mix each Component A with the Component B of its own system, stirring at low speed. All in One needs no mixing.

  3. 3 Application

    Thin, even coats with a microfibre roller, brush or spray gun, respecting the drying time between coats specified for each system.

    1 unit paint roller for enamel WT 4mm/220mm
  4. 4 Curing

    In most systems, full curing takes 7 days; until then, avoid water and harsh products.

Topsealer products

27 products
Topsealer WT Pool 5L
Topsealer WT Pool

Topsealer® WT Pool is a two-component water-based varnish, designed to protect surfaces subject to continuous water immersion. It is the perfect solution...

From €188,825 L
View product
Topsealer® All in One Satin 2L
Topsealer® All in One Satin

Topsealer® All in One Satin is a one-component water-based varnish specially designed to protect microcement surfaces, especially those with low traffic such...

From €79,642 L · 5 L
View product
Topsealer® All in One Matte 2L
Topsealer® All in One Matte

Topsealer® All in One matte is a single-component water-based polyurethane varnish, designed as a sealing and protective coat for decorative microcement coatings,...

From €95,092 L · 5 L
View product
Documentation

Topsealer technical data sheets

Frequently asked questions about Topsealer

What are Topsealer varnishes used for?
They are sealers that protect microcement, decorative concrete and other continuous coatings against wear, scratching, water and chemicals, enhancing their colour. Depending on the system, they are also suitable for wood, parquet or stone.
Which Topsealer system suits me?
All in One is one-component and the easiest to apply, designed for furniture, countertops or washbasins. The WT range (One Coat, Dragon, Natural Effect, Spray) are water-based two-component products; DSV and PRO+ SLOW are solvent-based. PRO+ FAST cures quickly in a single coat, and WT Pool is designed for submerged surfaces.
How are component A and component B mixed?
Each component A is mixed with the component B of its own system and in the indicated ratio, which varies by system (for example, 5:1 for WT One Coat or 2:1 for DSV). Stir at low speed until the mix is homogeneous and apply it within its pot life. All in One needs no mixing.
Can I use it outdoors or in swimming pools?
Yes: WT One Coat, WT Dragon, DSV, WT Spray and All in One matt are suitable for indoors and outdoors. All in One satin is recommended for dry interiors or decorative items. For swimming pools, fountains or ponds, use Topsealer WT Pool, designed for continuous immersion in water.
What finishes can I achieve?
There are matt, satin, gloss and super-matt versions, as well as the Natural Effect finish, with a subtle satin sheen. They are transparent, enhance the colour of the coating and do not yellow over time.
When can I use the surface after sealing it?
In most systems full curing is reached after 7 days; in the meantime, avoid water and harsh products. With WT Pool, do not fill the pool until 7 days after the last coat.