Range

XtremeFloor

Self-levelling mortars for interior floors: Level Concrete evens out the substrate before the microcement and pigmentable Level Decor serves as a continuous, joint-free decorative finish. Compatible with underfloor heating.

  • Interior
  • Self-levelling
  • Underfloor heating
  • Pigmentable
  • Pump-applicable
System

How the system is applied

  1. 1 Primer

    Clean, dry, consolidated substrate. Prime it with Primapox 100 Barrier before pouring the mortar.

    Component A Primapox® 100 BARRIER 3.1Kg LQ
  2. 2 Mixing

    Mix the powder with water using an electric mixer until smooth and lump-free. For Level Decor, pigment the water with Arcocem Plus.

  3. 3 Pouring

    Pour and spread the mortar, and run a spiked roller to remove air. On large areas, apply it by pump.

    XTREMFLOOR Level Concrete 25Kg
  4. 4 Finish

    Over Level Concrete, apply the final coating, such as microcement. Level Decor can be sealed with Topsealer after 48 h.

    Component A Topsealer® WT One Coat Matte 5L

XtremeFloor products

2 products
XTREMFLOOR Level Decor 25Kg
XTREMFLOOR Level Decor

XTREMFLOOR® Level Decor 25 Kg is a high-performance, pigmented, decorative self-leveling mortar, designed for continuous cementitious coatings indoors with high aesthetic impact...

From €130,4925 kg
View product
XTREMFLOOR Level Concrete 25Kg
XTREMFLOOR Level Concrete

XTREMFLOOR® Level Concrete is a thin-layer (1–10 mm) self-leveling mortar developed to level and prepare indoor floors before applying microcement or systems...

From €48,1125 kg
View product
Documentation

XtremeFloor technical data sheets

Frequently asked questions about XtremeFloor

What is the difference between XTREMFLOOR Level Concrete and XTREMFLOOR Level Decor?
Level Concrete is a thin-layer self-levelling compound for levelling the floor before applying microcement or another coating. Level Decor is a decorative, pigmentable self-levelling compound that remains as a continuous, joint-free final finish.
Can it be used outdoors?
No, both self-levelling mortars are intended for indoor floors.
Is it compatible with underfloor heating?
Yes, both Level Concrete and Level Decor are compatible with underfloor heating systems.
What preparation does the substrate need?
It must be clean, dry and consolidated, with a minimum compressive strength of 12 MPa and 1.2 N/mm² of adhesion. Before pouring the mortar, prime with Primapox® 100 Barrier.
How is it applied?
The powder is mixed with water using an electric mixer until homogeneous, then poured and spread, and a spiked roller is passed over it to remove air. On large surfaces it can be applied by pumping.
Can I colour XTREMFLOOR Level Decor?
Yes, it is pigmented by adding Arcocem® Plus to the mixing water. After 48 h you can seal it with a varnish such as Topsealer® if you want additional protection.