Range

Sealcem

Clear varnishes to protect and enhance printed concrete, microcement and cementitious surfaces, plus a curing compound and a consolidating hardener. They enhance colour and preserve the original texture.

  • Printed concrete
  • Interior
  • Exterior
  • Water- or solvent-based
System

How the system is applied

  1. 1 Preparation

    Wait at least 72 h after the floor is laid. Wash the surface and let it become clean and completely dry.

  2. 2 First coat

    Apply a thin, even coat with a spray gun at 30–40 cm from the substrate, a brush or roller, without forming puddles.

    Sealcem® WT METACRET 25L
  3. 3 Second coat

    Touch-dry in 1–2 h. Apply the second coat after 2–4 h.

  4. 4 Curing

    Full curing is reached in 24–48 h. Clean tools with water if you use a Sealcem WT.

Sealcem products

6 products
Sealcem® WT METACRET 25L
Sealcem® WT METACRET

Sealcem® WT Metacret is a water-based varnish made from acrylic-methacrylic copolymers, specially formulated to protect and enhance stamped concrete, microcement, and polished...

From €204,1425 L
View product
Sealcem® WT S70 25L
Sealcem® WT S70

Sealcem® WT S70 is a ready-to-use styrene-acrylic water-based varnish, designed to protect and enhance continuous stamped concrete, microcement, and other decorative cementitious...

From €126,8725 L
View product
Sealcem WT AC80 25L
Sealcem WT AC80

Sealcem® WT AC80 25L is a transparent, high-performance acrylic resin in aqueous dispersion, formulated for use as a surface hardener, consolidant, and...

From €165,6425 L
View product
Sealcem® WT Cure 25L
Sealcem® WT Cure

Sealcem® WT Cure 25L is a water-based acrylic resin designed as a curing agent for cementitious mortars, microcement, and continuous decorative coatings.

From €667,5225 L
View product
Sealcem WT AC70 5L
Sealcem WT AC70

Sealcem® WT AC70 is a water-based acrylic varnish designed to protect and enhance printed concrete and microcement surfaces. Thanks to its excellent...

From €37,395 L · 25 L
View product
Sealcem® DSV S70 18L
Sealcem® DSV S70

Sealcem® DSV S70 Sealer is a methacrylic solvent-based varnish, formulated to protect and enhance microcement surfaces, stamped concrete, and cementitious pavements.

From €255,4918 L
View product
Documentation

Sealcem technical data sheets

Frequently asked questions about Sealcem

What products does the Sealcem range include?
Varnishes to protect and enhance printed concrete, microcement and cementitious surfaces (DSV S70, WT Metacret, WT AC70 and WT S70), a curing compound for mortars (WT Cure) and a consolidating hardener (WT AC80).
What is the difference between Sealcem WT and DSV S70?
Sealcem WT products are water-based and ready to use, and tools are cleaned with water. Sealcem® DSV S70 is a solvent-based varnish, designed for outdoor use and classified as dangerous goods (ADR).
Can they be used indoors and outdoors?
Yes. WT Metacret, WT AC70 and WT S70 are suitable for indoors and outdoors, and WT Metacret is ideal for garages, driveways, patios and pavements. DSV S70 is designed for outdoors and withstands weather and hot-cold cycles.
When can I varnish a newly laid floor?
Wait at least 72 hours after the floor has been laid and make sure it is clean and dry. Sealcem® WT Cure, on the other hand, is applied over the still-fresh mortar, with no excess moisture on the surface.
Do they change the look of the floor?
The varnishes are transparent, enhance the colour and preserve the original texture. WT AC70 is not suitable for very light or white tones, as it may yellow slightly over time. WT Cure does not alter the colour and WT AC80 does not form a film.
How are Sealcem varnishes applied?
In thin, even coats, from 30–40 cm away from the substrate if using a spray gun, without forming puddles. You can apply the second coat after 2–4 hours and full curing is reached in 24–48 hours.