ES
FR
IT
PT
DE
CS
DA
NL
NO
FI
SV
Evoluttion Microfino S
Evoluttion Microfino® S is a single-component finishing microcement, developed to offer a fine and elegant finish on vertical surfaces such as walls...
From €105,3215 kg
View product
Range
Evoluttion
Evoluttion is a one-component microcement: it is only mixed with water and pigment, with no resins. It simplifies on-site mixing and creates continuous 1 to 3 mm coatings on floors and walls over concrete, ceramic, plaster or MDF.
How the system is applied
-
1
Primer
Clean, dry, sound substrate. Primacem Plus on non-absorbent substrates or Primacem ABS on absorbent ones.
Primacem® Plus 5L
-
2
Base coat
Two coats of Evoluttion Microbase with a steel trowel, sanding between coats with 40 grit.
Evoluttion Microbase L 20kg
-
3
Finish
Two thin coats of Microfino (walls and furniture) or Microdeck (interior floors) with a flexible trowel. Never more than 1 mm per coat.
Evoluttion Microfino S 15kg
-
4
Sealing
After 24–48 h, Presealer as a pore sealer and Topsealer WT Dragon varnish in matt, satin or gloss.
Presealer 5L
Evoluttion Microbase
Evoluttion Microbase® L is a one-component microcement primer, specially formulated to be applied as a base coat in continuous decorative systems. Its...
From €106,5620 kg
View product
Evoluttion Microdeck® M
Evoluttion Microdeck® M is a one-component finishing microcement, specially designed for application on interior floors. With a medium texture, it is characterized...
From €124,8818 kg
View product
Evoluttion Microdeck®
Evoluttion Microdeck® L is a single-component finishing microcement, specially designed for application on high-traffic interior surfaces. It offers a uniform finish with...
From €124,8818 kg
View product
Evoluttion Microbase XL
Evoluttion Microbase XL is a one-component microcement designed as a preparation layer for continuous coating systems. With a medium-coarse grain size, it...
From €106,5620 kg
View product
Evoluttion Microbase XXL
Evoluttion Microbase XXL is a single-component preparation microcement designed to be the first coat in continuous decorative coating systems.
From €106,5620 kg
View product
Evoluttion technical data sheets
Frequently asked questions about Evoluttion
What sets Evoluttion apart from other microcements?
Evoluttion is a one-component microcement: it is only mixed with water (and pigment), with no need for resins. This simplifies on-site mixing and reduces the margin for error.
Which products make up the Evoluttion system?
Evoluttion Microbase (L, XL or XXL) is the preparation layer. The finish goes on top: Evoluttion Microfino, with a fine texture for walls and furniture, or Evoluttion Microdeck, designed for walkable indoor floors.
What surfaces can it be applied on?
It bonds to concrete, mortar, ceramic, plaster, plasterboard and MDF, on floors and walls. The substrate must be clean, dry, firm and grease-free, and should be primed beforehand with Primacem Plus or Primacem ABS depending on its absorption.
Can it be used outdoors?
Evoluttion Microbase and Evoluttion Microfino are suitable for indoors and outdoors. Evoluttion Microdeck, however, is designed for indoor floors.
How is it applied?
After priming, apply two coats of Evoluttion Microbase with a metal trowel, sanding between coats with 40 grit. Then apply two thin coats of the finish (Microfino or Microdeck) with a flexible trowel, sanding lightly between them. Do not apply coats thicker than 1 mm; the recommended total thickness is 1 to 3 mm.
Does it need sealing?
Yes. Once hardened (between 24 and 48 hours), it is sealed with the Presealer pore-sealing primer and a Topsealer WT varnish, such as Topsealer WT Dragon, in matt, satin or gloss finish.
