Range

Elitte

Ready-to-use, water-based decorative glazes with a metallic finish: Elitte Glaze gives a metallic sheen with a light-and-shadow effect and Elitte Glitter a glitter effect with metallic reflections. Enhance walls, floors or furniture over microcement, concrete, ceramic, plaster, glass or metal.

  • Interior
  • Exterior
  • Ready to use
  • Water-based
  • Metallic effect
Elitte
System

How the system is applied

  1. 1 Preparation

    Clean, prepared substrate. Stir the contents of the container well; no dilution needed.

  2. 2 Application

    Apply one coat with a trowel, brush, sponge, roller or spray gun. The effect changes depending on the tool and technique.

  3. 3 Drying

    Allow to dry for at least 8 hours before applying further coats or the sealer.

  4. 4 Intermediate coat

    In traffic areas, apply two coats of Presealer and sand lightly.

    Presealer 5L
  5. 5 Sealing

    Finish with two coats of Topsealer WT to increase wear resistance.

    Component A Topsealer® WT One Coat satin 1L

Elitte products

8 products
Elitte Glitter Silver 500 0.5L
Elitte Glitter Silver 500

Elitte Glitter Silver 500 is a ready-to-use decorative glaze with a high-gloss glitter effect, providing a modern and sophisticated silver finish.

From €56,580.5 L
View product
Elitte Glaze copper 063 0.5L
Elitte Glaze copper 063

Elitte Glaze Cobre 063 is a ready-to-use decorative metallic glaze that provides a glossy finish with elegant and warm copper highlights.

From €43,740.5 L
View product
Elitte Glitter Gold 500 0.5L
Elitte Glitter Gold 500

Elitte Glitter Gold 500 is a ready-to-use decorative glitter glaze that provides a shiny finish with golden reflections and a high visual...

From €56,580.5 L
View product
Elitte Glitter Bronze 200 0.5L
Elitte Glitter Bronze 200

Elitte Glitter Bronze 200 is a ready-to-use glaze that provides a decorative finish with a glitter effect and bronze reflections. It is...

From €56,580.5 L
View product
Elitte Glaze gold 063 0.5L
Elitte Glaze gold 063

Elitte Glaze Gold 063 is a ready-to-use decorative metallic glaze that provides a brilliant gold finish with high visual impact. It belongs...

From €56,580.5 L
View product
Elitte Glaze copper red 063 0.5L
Elitte Glaze copper red 063

Elitte Glaze Cobre Red 063 is a ready-to-use satin metallic glaze that offers a brilliant finish with intense copper reflections. It belongs...

From €43,740.5 L
View product
Elitte Glaze Aluminum 054 0.5L
Elitte Glaze Aluminum 054

Elitte Glaze Aluminium 054 is a ready-to-use metallic effect glaze that provides a glossy finish with silver highlights. As part of the...

From €70,660.5 L
View product
Elitte Glaze White Silver 500 0.5L
Elitte Glaze White Silver 500

Elitte Glaze Blanco Plata 500 is a ready-to-use metallic glaze that provides finishes with a pearlescent sheen and silver reflections on decorative...

From €43,740.5 L
View product
Documentation

Elitte technical data sheets

Frequently asked questions about Elitte

What is Elitte and what is the difference between Elitte Glaze and Elitte Glitter?
They are ready-to-use decorative glazes. Elitte Glaze gives a bright metallic finish with a light-and-shade effect, while Elitte Glitter provides a glitter effect with metallic reflections.
What surfaces can I apply Elitte glazes on?
They can be applied on microcement, concrete, brick, ceramic, plaster, plasterboard, glass and metal. They are great for enhancing walls, floors or furniture.
Can Elitte be used outdoors?
Yes, all Elitte glazes are suitable for both indoor and outdoor use.
Does it need to be diluted or mixed before use?
No. It is a ready-to-use water-based product, with no dilution needed. Just stir the contents of the container well before applying.
What tools is it applied with?
You can apply it with a trowel, brush, sponge or spray gun, and with a roller on most references. The finish varies with the tool and technique, from even coats to higher-contrast effects.
Does it need a varnish or final protection?
We recommend protecting it with a varnish such as Topsealer WT to increase wear resistance. In traffic areas, we recommend applying two coats of Presealer, sanding lightly and finishing with two coats of Topsealer WT.