ES
FR
IT
PT
DE
CS
DA
NL
NO
FI
SV
Covercem® Stone
Covercem® Stone is a decorative, thin-layer repair mortar from the Covercem® line. Ideal for renovating and consolidating printed concrete, natural stone, brick,...
From €93,1020 kg
View product
Range
Covercem
Thin-layer mineral mortar to renew and consolidate printed concrete, natural stone, brick and other cementitious substrates. It leaves a matt, mineral, non-slip finish that is breathable and resistant to weathering and UV rays. Ideal for floors, stairs and facades.
How the system is applied
-
1
Cleaning
Remove dust, grease, efflorescence, paints or varnishes from the substrate. Use Ecoclean if necessary.
Ecoclean Pro 25L
-
2
Mixing
Mix 20 kg of product with 5.5–6 L of water until you obtain a smooth paste. You can pigment it with Arcocem Basic or Plus.
Arcocem Basic White 1L
-
3
Application
Spread 1 or 2 coats with a steel or rubber trowel, allowing 4–6 h drying between coats.
-
4
Sealing
Once dry, protect with two coats of Sealcem WT or DSV. Full curing takes 7 to 14 days.
Sealcem® WT S70 25L
Covercem® Stone bucket
Covercem® Stone is a thin-coat mineral mortar for the aesthetic and functional renovation of surfaces such as stamped concrete, natural stone, or...
From €93,3320 kg
View product
Covercem technical data sheets
Frequently asked questions about Covercem
What is Covercem® Stone and what is it used for?
It is a thin-layer (1–2 mm) mineral mortar to renew and consolidate printed concrete, natural stone, brick and other cementitious substrates. It is ideal for floors, stairs and façades.
Can it be applied outdoors?
Yes, it is applied indoors and outdoors. It is weather-resistant and UV-resistant.
What finish does it give?
A matt, mineral, non-slip finish. It does not form a film, does not crack and is breathable.
How is it prepared and applied?
Clean the substrate of dust, grease, paints or varnishes. Mix 20 kg of product with 5.5–6 L of water until you get a homogeneous paste and apply 1 or 2 coats with a metal or rubber trowel, letting it dry 4–6 h between coats.
Can it be pigmented?
Yes. Its base colour is white and it can be pigmented with Arcocem® Basic or Plus.
Does it need sealing and how long does it take to cure?
Yes, protect it with two coats of Sealcem® WT or DSV once dry. Full curing takes between 7 and 14 days, depending on temperature and humidity.
