ES
FR
IT
PT
DE
CS
DA
NL
NO
FI
SV
Natture XL
Natture XL is a two-component lime-based microcement that acts as a base layer in low-thickness continuous decorative coatings. This product is specially...
From €124,6320 kg
View product
Range
Natture
Lime-based two-component microcement for continuous 1 to 3 mm coatings with a handcrafted tadelakt or exposed-concrete finish. Soft, silky texture for floors, walls, ceilings, stairs and furniture, indoors and outdoors.
How the system is applied
-
1
Preparation
Clean, dry, sound substrate, with Builtex mesh if needed. Primacem ABS on absorbent substrates or Primacem PLUS on non-absorbent ones.
Primacem® ABS 5L
-
2
Mixing
Mix Natture with Acricem resin and pigment at low speed for about 4 minutes, until smooth.
Acricem 5L
-
3
Base coat
Natture XL with a steel trowel, in one or two coats, with at least 4 h drying and sanding between them.
Natture XL 20kg
-
4
Finish
Natture M or L with a trowel. Leave the porosity open for a tadelakt effect or close it for exposed concrete.
Natture M 18kg
-
5
Sealing
After 24–48 h, Presealer and Topsealer WT in matt, satin or gloss finish.
Presealer 5L
Natture
Natture® L 20 Kg is a two-component, lime-based microcement, designed to achieve continuous thin-layer finishes (1–3 mm) with an artisan tadelakt or...
From €124,6320 kg
View product
Natture M
Natture® M 18 Kg is a two-component fine-finish tadelakt microcement, ideal for creating continuous coatings of high aesthetic value on floors, walls,...
From €112,1718 kg
View product
Natture technical data sheets
Frequently asked questions about Natture
What is Natture and what finish does it achieve?
Natture is a two-component, lime-based microcement for thin continuous coatings (1–3 mm). It allows handcrafted finishes such as tadelakt or exposed concrete, with a soft, silky texture.
Where can it be applied?
Indoors and outdoors, on floors, walls, ceilings, stairs and furniture. It bonds to concrete, mortars, ceramic, plaster, plasterboard and MDF.
What is it mixed with?
Natture is component A (powder) and is mixed with Acricem resin as component B, and with pigments if you wish. Mix at low speed for about 4 minutes until you get a homogeneous mix.
How do I prepare the substrate?
It must be clean, dry and firm; reinforce cracks and use Builtex mesh if needed. Prime absorbent surfaces with Primacem ABS and non-absorbent ones with Primacem PLUS.
How do I achieve the tadelakt or exposed concrete effect?
Apply with a metal trowel in one or two coats, letting it dry at least 4 hours between coats and sanding. For a tadelakt effect, leave the porosity open; for exposed concrete, close it completely.
Does it need sealing?
Yes. Once hardened (24–48 h), it is sealed with Presealer and Topsealer WT according to the desired finish, which can be matt, satin or gloss. This improves its resistance to water, stains and traffic.
