ES
FR
IT
PT
DE
CS
DA
NL
NO
FI
SV
Natture
Natture XL 20kg
Natture XL is a two-component lime-based microcement that acts as a base layer in low-thickness continuous decorative coatings. This product is specially formulated to achieve artisanal finishes such as tadelakt or exposed concrete effects, thanks to its coarser aggregate.
€124,63
VAT included
- Range
- Natture
- SKU
- TT01603
- Content
- 20 kg
- Coverage
- 1 kg/m² per coat
Calculator
How much Natture do you need?
Consumption used: 1 kg/m² per coat
You need approx.
We recommend
Total
Estimate including a 10% margin. Actual consumption depends on the substrate and application.
Natture XL is a two-component lime-based microcement that acts as a base coat in low-thickness continuous decorative coatings. This product is specially formulated to achieve artisanal finishes such as tadelakt effect or exposed concrete, thanks to its coarser aggregate. Its excellent workability, hardness, and adherence to multiple substrates make it an ideal option for both interior and exterior applications, on floors, walls, ceilings, stairs, and furniture.
Application data
Recommended coats2
Consumption per coat1 kg/m²
Time between coats
- Substrate preparation: The surface must be clean, dry, level, and with good adhesion. It is recommended to apply an appropriate primer depending on the type of substrate (Primacem Plus, ABS, or Primapox Barrier with Builtex mesh).
- Mixing: Mix component A (powder) with component B (Acricem resin) in a ratio of 20 kg of powder per 6 L of resin. A low-speed mechanical stirrer should be used until a homogeneous mixture is obtained.
- Application: Apply with a metal trowel in one or two coats, allowing a minimum drying time of 4 hours between them. To achieve a tadelakt effect, leave the porosity open; for an exposed concrete effect, close completely.
- Drying: After complete drying, sand the surface before applying the next coat or the finish microcement.
- Sealing: It is recommended to protect the system with Topsealer WT to improve resistance to water, stains, and traffic.
Yield
Approximately 2.00 kg/m² in two coats.
Technical Specifications
- Maximum aggregate size: 0.4 mm
- Powder density: 1.175 ± 0.050 g/cm³
- Compressive strength (28 days): 49.7 MPa
- Flexural strength (28 days): 13.4 MPa
- Adhesion to substrate: ≥ 1.5 MPa
- Format: 20 kg container
Storage Conditions
Store in the original closed container, in a dry place protected from humidity and direct sunlight, between 5 °C and 30 °C. Shelf life: 12 months from the date of manufacture.
- Microcement manufacturers
- 17+ years of experience
- ISO 9001
- ISO 14001
Payment methods
100% secure, encrypted payment with any of the methods shown above.
Delivery times
| Spain | 3-5 working days |
|---|---|
| Europe | 5-10 working days |
| Rest of the world | 10-20 working days |
Orders placed before 11:00 (Spanish time) ship the same working day.
Approximate times; they may vary depending on the destination.
Shipping costs
Calculated automatically at checkout based on the destination and the weight of the order.
See shipping policy →
14 calendar days
to return from the day you receive your order
Unused product
and in perfect condition
Return shipping costs
paid by the customer, unless the product is defective or incorrect
How to return a product
- Fill in our returns and incidents form.
- Give your order number and the reason for the return.
- Send the product back unused and in perfect condition.
Frequently asked questions about Natture
What is Natture and what finish does it achieve?
Natture is a two-component, lime-based microcement for thin continuous coatings (1–3 mm). It allows handcrafted finishes such as tadelakt or exposed concrete, with a soft, silky texture.
Where can it be applied?
Indoors and outdoors, on floors, walls, ceilings, stairs and furniture. It bonds to concrete, mortars, ceramic, plaster, plasterboard and MDF.
What is it mixed with?
Natture is component A (powder) and is mixed with Acricem resin as component B, and with pigments if you wish. Mix at low speed for about 4 minutes until you get a homogeneous mix.
How do I prepare the substrate?
It must be clean, dry and firm; reinforce cracks and use Builtex mesh if needed. Prime absorbent surfaces with Primacem ABS and non-absorbent ones with Primacem PLUS.
How do I achieve the tadelakt or exposed concrete effect?
Apply with a metal trowel in one or two coats, letting it dry at least 4 hours between coats and sanding. For a tadelakt effect, leave the porosity open; for exposed concrete, close it completely.
Does it need sealing?
Yes. Once hardened (24–48 h), it is sealed with Presealer and Topsealer WT according to the desired finish, which can be matt, satin or gloss. This improves its resistance to water, stains and traffic.
What is the coverage of Natture XL?
Approximately 1 kg/m² per coat; 2 coats are recommended. Actual consumption depends on the substrate and application. Use the calculator above to work out how much you need.
Where can I find the technical data sheet for Natture XL?
You can download the technical data sheet (PDF) with all the application details.
Recently viewed
Don't forget! The products you saw. Add them to your cart now.
People also bought
Here are some of our most similar products that people are buying.