ES
FR
IT
PT
DE
CS
DA
NL
NO
FI
SV
Calculator
How much Natture do you need?
Consumption used: 1 kg/m² per coat
You need approx.
We recommend
Total
Estimate including a 10% margin. Actual consumption depends on the substrate and application.
Natture® M 18 Kg is a two-component tadelakt microcement with a fine finish, ideal for creating continuous, highly aesthetic coatings on floors, walls, and architectural furniture. Its smooth texture and handcrafted finish provide a natural tadelakt or exposed concrete effect, combining elegance and resistance for interior and exterior projects. It belongs to the Natture® range, specially formulated for refined thin-layer finishes.
Application data
Recommended coats2
Consumption per coat1 kg/m²
Time between coats
- Prepare the substrate: clean, dry, firm; reinforce with mesh if necessary.
- Apply appropriate primer (Primacem ABS/PLUS or Primapox depending on the substrate).
- Mix 18 kg of component A with the corresponding volume of Acricem® B resin, and optionally pigments.
- Mix at low speed for about 4 minutes until a homogeneous mixture is obtained.
- Apply with a trowel in one or more coats, allowing to dry and sanding between coats to achieve a smooth finish.
- Finally, seal with Presealer and Topsealer® products according to the desired finish.
Performance
- Approximately 1 Kg/m² per coat, total estimated yield in two coats: 2 Kg/m².
Technical specifications
- Maximum grain size: 0.2 mm
- Application thickness: 1–3 mm
- Compressive strength (28 days): approximately 43.9 MPa
- Flexural strength (28 days): approximately 12.7 MPa
- Minimum adhesion: ≥ 1.2 N/mm²
- Continuous seamless finish
- Format: 18 Kg
Storage conditions
Store the product in its original sealed container, in a dry, ventilated place protected from sunlight, at temperatures between 10 °C and 30 °C. Maximum shelf life: 12 months from the manufacturing date.
- Microcement manufacturers
- 17+ years of experience
- ISO 9001
- ISO 14001
Payment methods
100% secure, encrypted payment with any of the methods shown above.
Delivery times
| Spain | 3-5 working days |
|---|---|
| Europe | 5-10 working days |
| Rest of the world | 10-20 working days |
Orders placed before 11:00 (Spanish time) ship the same working day.
Approximate times; they may vary depending on the destination.
Shipping costs
Calculated automatically at checkout based on the destination and the weight of the order.
See shipping policy →
14 calendar days
to return from the day you receive your order
Unused product
and in perfect condition
Return shipping costs
paid by the customer, unless the product is defective or incorrect
How to return a product
- Fill in our returns and incidents form.
- Give your order number and the reason for the return.
- Send the product back unused and in perfect condition.
Frequently asked questions about Natture
What is Natture and what finish does it achieve?
Natture is a two-component, lime-based microcement for thin continuous coatings (1–3 mm). It allows handcrafted finishes such as tadelakt or exposed concrete, with a soft, silky texture.
Where can it be applied?
Indoors and outdoors, on floors, walls, ceilings, stairs and furniture. It bonds to concrete, mortars, ceramic, plaster, plasterboard and MDF.
What is it mixed with?
Natture is component A (powder) and is mixed with Acricem resin as component B, and with pigments if you wish. Mix at low speed for about 4 minutes until you get a homogeneous mix.
How do I prepare the substrate?
It must be clean, dry and firm; reinforce cracks and use Builtex mesh if needed. Prime absorbent surfaces with Primacem ABS and non-absorbent ones with Primacem PLUS.
How do I achieve the tadelakt or exposed concrete effect?
Apply with a metal trowel in one or two coats, letting it dry at least 4 hours between coats and sanding. For a tadelakt effect, leave the porosity open; for exposed concrete, close it completely.
Does it need sealing?
Yes. Once hardened (24–48 h), it is sealed with Presealer and Topsealer WT according to the desired finish, which can be matt, satin or gloss. This improves its resistance to water, stains and traffic.
What is the coverage of Natture M?
Approximately 1 kg/m² per coat; 2 coats are recommended. Actual consumption depends on the substrate and application. Use the calculator above to work out how much you need.
Where can I find the technical data sheet for Natture M?
You can download the technical data sheet (PDF) with all the application details.
Recently viewed
Don't forget! The products you saw. Add them to your cart now.
People also bought
Here are some of our most similar products that people are buying.