Sealcem® WT METACRET 25L
Sealcem

Sealcem® WT METACRET 25L

Sealcem® WT Metacret is a water-based varnish made from acrylic-methacrylic copolymers, specially formulated to protect and enhance stamped concrete, microcement, and polished concrete floors in both indoor and outdoor environments.

€204,14

VAT included

Range
Sealcem
SKU
TT11004
Content
25 L
Coverage
0.167 L/m² per coat
PDFTechnical data sheet
Calculator

How much Sealcem do you need?

Consumption used: 0.167 L/m² per coat

You need approx.
We recommend
    Total

    Estimate including a 10% margin. Actual consumption depends on the substrate and application.

    Sealcem® WT Metacret is a water-based varnish made from acrylic-methacrylic copolymers, specially formulated to protect and enhance stamped concrete, microcement, and polished concrete pavements in both indoor and outdoor environments. Its non-yellowing formula enhances the original color and provides a resistant, transparent film that improves durability against abrasion, alkalinity, efflorescence, and extreme weather conditions, always preserving the natural texture of the substrate.


    Frequently asked questions about Sealcem

    What products does the Sealcem range include?
    Varnishes to protect and enhance printed concrete, microcement and cementitious surfaces (DSV S70, WT Metacret, WT AC70 and WT S70), a curing compound for mortars (WT Cure) and a consolidating hardener (WT AC80).
    What is the difference between Sealcem WT and DSV S70?
    Sealcem WT products are water-based and ready to use, and tools are cleaned with water. Sealcem® DSV S70 is a solvent-based varnish, designed for outdoor use and classified as dangerous goods (ADR).
    Can they be used indoors and outdoors?
    Yes. WT Metacret, WT AC70 and WT S70 are suitable for indoors and outdoors, and WT Metacret is ideal for garages, driveways, patios and pavements. DSV S70 is designed for outdoors and withstands weather and hot-cold cycles.
    When can I varnish a newly laid floor?
    Wait at least 72 hours after the floor has been laid and make sure it is clean and dry. Sealcem® WT Cure, on the other hand, is applied over the still-fresh mortar, with no excess moisture on the surface.
    Do they change the look of the floor?
    The varnishes are transparent, enhance the colour and preserve the original texture. WT AC70 is not suitable for very light or white tones, as it may yellow slightly over time. WT Cure does not alter the colour and WT AC80 does not form a film.
    How are Sealcem varnishes applied?
    In thin, even coats, from 30–40 cm away from the substrate if using a spray gun, without forming puddles. You can apply the second coat after 2–4 hours and full curing is reached in 24–48 hours.
    What is the coverage of Sealcem® WT METACRET?
    Approximately 0.167 L/m² per coat; 2 coats are recommended. Actual consumption depends on the substrate and application. Use the calculator above to work out how much you need.
    Where can I find the technical data sheet for Sealcem® WT METACRET?
    You can download the technical data sheet (PDF) with all the application details.

    Recently viewed

    Don't forget! The products you saw. Add them to your cart now.

    People also bought

    Here are some of our most similar products that people are buying.