Component A Topsealer® DSV Matte 4L LQ

The Topsealer® DSV Matte 4 L LQ Component A is a two-component solvent-based polyurethane varnish, designed to protect microcement, decorative concrete, and other mineral substrates. Its matte finish provides a natural and sophisticated aesthetic, ideal for contemporary environments where a non-glossy look is desired. This component is part of the Topsealer® DSV system, known for its high mechanical and chemical resistance.

Main characteristics

• Two-component solvent-based polyurethane varnish with a matte finish.
• High resistance to abrasion, scratching, and household chemicals.
• Provides long-lasting protection without altering the texture of the coating.
• Compatible with decorative finishes on microcement such as Sttandard and Evoluttion systems.
• Suitable for indoor and outdoor use.
• Easy to apply with a roller or spray gun.

Instructions for use

1. Clean and thoroughly dry the surface before application.
2. Shake Component A well.
3. Mix with Component B in the established proportion.
4. Allow the mixture to rest for a few minutes before applying.
5. Apply with a 4 mm microfiber roller or spray gun in thin, even coats.
6. Observe drying times between coats and do not apply at extreme temperatures or in humid environments.

Performance

• Approximately 0.12 L/m² per coat, depending on the type of substrate and its absorption.

Technical specifications

• Format: 4 L
• Appearance: homogeneous liquid
• Finish: matte
• Chemical nature: aliphatic solvent-based polyurethane
• Application: roller or spray gun

Storage conditions

Store the product in its original sealed container, in a cool, dry, and ventilated place, between 5 °C and 30 °C. Avoid direct exposure to sunlight and heat sources.