Component A Topsealer® PRO+ FAST Colour AD 0.8Kg
Topsealer

Component A Topsealer® PRO+ FAST Colour AD 0.8Kg

Polyaspartic resin of a 100 % solids two-component varnish for microcement and concrete: single coat, no primer and fast drying. Mixed 100:80 with Component B.

€127,41 Kit price

VAT included

Sold together with

This product is only sold as a kit with its matching component. Adding it to the cart adds both, in the same quantity.

Component A Topsealer® PRO+ FAST Colour AD 0.8Kg €66,85 + Component B Topsealer® PRO+ FAST Colour AD 0.64 Kg €60,56

AComponent A Topsealer® PRO+ FAST Colour AD 0.8Kg

Range
Topsealer
SKU
TT02145
Coverage
0.1 kg/m² per coat
PDFTechnical data sheet A
ℹ️ Important notice: This product is part of a two-component system. One of them may be classified as dangerous goods. Available throughout the EU zone via land transport.
Calculator

How much Topsealer do you need?

Consumption used: 0.1 kg/m² per coat

You need approximately
We recommend
    Total

    Estimate including a 10% margin. Actual consumption depends on the substrate and application.

    Topsealer® PRO+ FAST Component A is the polyaspartic resin of a fast-curing, 100 % solids two-component varnish for protecting microcement and concrete floors, indoors and outdoors. It is applied in a single coat with no primer: it penetrates the pores and provides a complete seal.


    Frequently asked questions about Topsealer

    What are Topsealer varnishes used for?
    They are sealers that protect microcement, decorative concrete and other continuous coatings against wear, scratching, water and chemicals, enhancing their colour. Depending on the system, they are also suitable for wood, parquet or stone.
    Which Topsealer system suits me?
    All in One is one-component and the easiest to apply, designed for furniture, countertops or washbasins. The WT range (One Coat, Dragon, Natural Effect, Spray) are water-based two-component products; DSV and PRO+ SLOW are solvent-based. PRO+ FAST cures quickly in a single coat, and WT Pool is designed for submerged surfaces.
    How are component A and component B mixed?
    Each component A is mixed with the component B of its own system and in the indicated ratio, which varies by system (for example, 5:1 for WT One Coat or 2:1 for DSV). Stir at low speed until the mix is homogeneous and apply it within its pot life. All in One needs no mixing.
    Can I use it outdoors or in swimming pools?
    Yes: WT One Coat, WT Dragon, DSV, WT Spray and All in One matt are suitable for indoors and outdoors. All in One satin is recommended for dry interiors or decorative items. For swimming pools, fountains or ponds, use Topsealer WT Pool, designed for continuous immersion in water.
    What finishes can I achieve?
    There are matt, satin, gloss and super-matt versions, as well as the Natural Effect finish, with a subtle satin sheen. They are transparent, enhance the colour of the coating and do not yellow over time.
    When can I use the surface after sealing it?
    In most systems full curing is reached after 7 days; in the meantime, avoid water and harsh products. With WT Pool, do not fill the pool until 7 days after the last coat.
    What is the coverage of Component A Topsealer® PRO+ FAST Colour AD?
    Approximately 0.1 kg/m² per coat; 1 coats are recommended. Actual consumption depends on the substrate and application. Use the calculator above to work out how much you need.
    Where can I find the technical data sheet for Component A Topsealer® PRO+ FAST Colour AD?
    You can download the technical data sheet (PDF) with all the application details.

    Recently viewed

    Don't forget! The products you saw. Add them to your cart now.

    People also bought

    Here are some of our most similar products that people are buying.