Component A Topsealer® DSV Gloss 4L LQ

Component A Topsealer® DSV Gloss 4 L LQ is a two-component solvent-based polyurethane varnish specially formulated to offer superior protection and a glossy finish on microcement coatings, decorative concrete or mineral surfaces. This high chemical and mechanical resistance sealer is part of the Topsealer® DSV range, recognized for its durability and ability to preserve the aesthetic of the substrate with a high gloss finish. Ideal for interior and exterior spaces with high functional and decorative demands.

Main features

• Solvent-based polyurethane two-component varnish with a glossy finish.
• High resistance to wear, abrasion, scratching and chemicals.
• Compatible with microcement decorative systems, especially with products such as Sttandard and Evoluttion.
• Excellent adhesion and hardness.
• Ideal for indoor and outdoor application.
• Provides an impermeable and easy-to-clean surface.

How to use

1. Ensure the surface is dry, clean, and free of dust, grease, or other contaminants.
2. Shake Component A well before mixing.
3. Mix Component A with Component B in the indicated proportion.
4. Let the mixture rest for a few minutes before application.
5. Apply with a specific varnish roller in thin and even coats, respecting drying times between coats.
6. Do not apply at temperatures below 10 °C or above 30 °C. Avoid humid environments during application.

Performance

• Approximately 0.12 L/m² per coat (may vary depending on the porosity of the substrate and the applied system).

Technical specifications

• Format: 4 L
• Appearance: colorless liquid
• Finish: gloss
• Composition: aliphatic solvent-based polyurethane
• Application: roller or spray gun

Storage conditions

Store in its original, tightly closed container, in a dry and ventilated place, between 5 °C and 30 °C. Keep away from heat sources and direct sunlight.