Component A Industrial SMOOTH 18 kg

Industtrial LISO is a fine-grain, two-component epoxy microcement developed by Topciment for application as a finishing coat on interior surfaces. Its extremely smooth texture allows for elegant and continuous finishes, without joints, ideal for floors and walls in homes, commercial premises, offices or industrial areas with high technical and aesthetic demands.

This decorative microcement offers excellent mechanical and chemical resistance, making it ideal for high-traffic areas or those exposed to intensive use. Thanks to its epoxy base, it provides high adhesion to substrates such as concrete, cement mortar, ceramics or surfaces previously treated with other epoxies. It must always be applied with a sealer to ensure its durability and resistance.

Main characteristics

1. Two-component epoxy microcement with a fine and smooth finish.
2. For interior application on floors or walls only.
3. High resistance to chemicals, abrasion and heavy traffic.
4. No mesh required for application.
5. Requires sealing with Topsealer WT All in One or Topsealer WT Dragon for complete protection.

How to use

1. Substrate preparation:
   Ensure the surface is clean, dry, firm, and free of dust, grease or contaminants. It is recommended to apply an appropriate primer such as Primacem Plus or Primapox® 100 Barrier, depending on the type of substrate.
2. Mixing:
   Mix Component A with Component B in a 4:1 ratio by weight. Stir with a mechanical stirrer at low revolutions until a homogeneous mixture is achieved. Let it rest for a few minutes.
3. Application:
   Apply one or two coats of the product with a flexible metal trowel. Between coats, sand lightly if necessary (grit 80). Allow to dry for 8 to 12 hours depending on environmental conditions.
4. Sealing:
   Once cured, apply a protective coat of Topsealer WT All in One or Topsealer WT Dragon to ensure water, chemical and wear resistance.

Yield

• Approx. 0.60 kg/m² per coat.

Technical specifications

• Format: 18 kg
• Mixing ratio A:B: 4:1 by weight
• Density Component A: 1.55 ± 0.02 g/cm³
• Pot life of mixture: 60 minutes
• Time between coats: 8–12 hours
• Total curing: 7 days
• Application temperature: between 10 ºC and 30 ºC

Storage conditions

• Store in original sealed container in a dry place, protected from humidity and extreme temperatures.
• Shelf life: 12 months from manufacturing date.