Efectto Quartz Super Grain 6Kg

Efectto Quartz Super Grain is a ready-to-use microcement with a coarse aggregate that acts as a base coat within the continuous decorative system Efectto Quartz. It is designed to create resistant, textured, and high-performance surfaces on floors and walls, especially in high-traffic areas.

Its single-component paste formula eliminates mixing errors, reduces preparation time, and ensures consistent finishes.

Main features

1. Direct application: no need to mix with water or resin.
2. 0.5 mm aggregate size: ideal as a textured base coat.
3. High adhesion to a wide variety of substrates.
4. Ease of use: excellent workability with a steel trowel.
5. Compatible with Topciment primers and sealers: such as Primacem Plus and Topsealer WT One Coat.

Instructions for use

1. Substrate preparation:
   • The substrate must be clean, dry, consolidated, and free of dust or grease.
   • Apply the appropriate primer depending on the type of surface:
     • Absorbent substrates: use Primacem ABS.
     • Non-absorbent substrates: use Primacem Plus.
     • Metal or glass surfaces: apply Primacem Grip.
2. Product application:
   • Stir the contents of the container until a homogeneous paste is obtained.
   • Apply 2 coats of Efectto Quartz Super Grain with a steel trowel, allowing at least 4 hours drying time between coats.
   • Sand with 24-40 grit after each coat.
3. Finishing:
   • After applying and sanding the Super Grain coats, apply the finishing microcement (such as Medium or Small Grain).
   • Finish the system with 2 coats of varnish Topsealer WT One Coat, allowing 24 hours to dry between each coat.
   
   

Yield

Approximately 1.80 kg/m² (for two coats).

Technical specifications

• Aggregate size: 0.5 mm
• Density: 1.61 ± 0.02 g/cm³
• Viscosity: 120 – 140 Pa·s
• pH: 8 ± 1
• Format: 6 Kg

Storage conditions

• Store in a dry and ventilated place, protected from humidity.
• Temperature between 5 °C and 30 °C.
• Shelf life: up to 1 year in original sealed container.