Component B Primapox® 100 BARRIER 1.9Kg ADR
Primapox

Component B Primapox® 100 BARRIER 1.9Kg ADR

Hardener for the Primapox® 100 BARRIER epoxy primer, a vapour barrier for damp cementitious substrates. Mixed with Component A (62.5 : 37.5 by weight).

⚠️ Shipping restriction: Product classified as dangerous goods (ADR / LQ). Available throughout the EU zone by land only.
€195,22 Kit price

VAT included

Size
1.9 kg €66,85 7.6 kg €237,72
Sold together with

This product is only sold as a kit with its matching component. Adding it to the cart adds both, in the same quantity.

Component B Primapox® 100 BARRIER 1.9Kg ADR €66,85 + Component A Primapox® 100 BARRIER 3.1Kg LQ €128,37

BComponent B Primapox® 100 BARRIER 1.9Kg ADR

Range
Primapox
SKU
TT03025
Coverage
0.5 kg/m² per coat
PDFTechnical data sheet B
ℹ️ Important notice: This product is part of a two-component system. One of them may be classified as dangerous goods. Available throughout the EU zone via land transport.
Calculator

How much Primapox do you need?

Consumption used: 0.5 kg/m² per coat

You need approximately
We recommend
    Total

    Estimate including a 10% margin. Actual consumption depends on the substrate and application.

    Primapox® 100 BARRIER Component B is the hardener of the two-component epoxy primer Primapox® 100 BARRIER, which acts as a vapour barrier on cementitious substrates with residual moisture before microcements, self-levelling compounds and other decorative coatings.


    Frequently asked questions about Primapox

    What is Primapox?
    Primapox is a range of solvent-free, two-component epoxy primers applied before decorative coatings such as microcement or self-levelling compounds, to improve adhesion and system performance.
    What is the difference between Primapox 100 BARRIER and Primapox 100 FLUID?
    BARRIER acts as a vapour barrier on cementitious substrates, protecting against rising or residual moisture. FLUID is a low-viscosity consolidating primer for low- or non-porous substrates, such as polished concrete, ceramic or natural stone.
    Do I need to buy both Component A and Component B?
    Yes. Primapox is two-component: Component A (resin) must be mixed with its Component B (hardener) of the same reference, using a mechanical stirrer at low speed, until you get a homogeneous mix.
    How is it applied?
    On a clean, dry substrate free of grease and loose particles. BARRIER is applied with a roller, notched trowel or spatula, and 2 coats are recommended, the second once the first is touch dry. FLUID is applied in a thin, even coat with a roller or brush. Do not apply on substrates with surface water.
    Which products is it compatible with?
    Primapox 100 FLUID works as an adhesion bridge for Topsealer polyurethane varnishes, epoxy resins and Acricem acrylic resins; once dry, you can apply products such as Efectto Quartz, Sttandard Microbase or Evoluttion Microfino. BARRIER is used before microcements or self-levelling compounds.
    Which sizes is Component B Primapox® BARRIER sold in?
    In 1.9 kg · 7.6 kg, from €66,85.
    Where can I find the technical data sheet for Component B Primapox® BARRIER?
    You can download the technical data sheet (PDF) with all the application details.

    Recently viewed

    Don't forget! The products you saw. Add them to your cart now.

    People also bought

    Here are some of our most similar products that people are buying.