Range

Imacem

Moulds and tools to stamp textures onto fresh printed concrete: fan, cobblestone, tile, road, border, slab, wood, stone or ashlar, plus texturing rollers, tamper, trowels and Orbitel. Many models also work for microcement and decorative mortars.

  • Printed concrete
  • Floors and walls
  • Interior
  • Exterior
  • Reusable
See the 120 products Technical data sheets →
Imacem
System

How the system is applied

  1. 1 Base and colour

    With the fresh concrete levelled, dust on Stonecem® Floor and smooth it with a steel trowel.

    Stonecem® Floor cement 25kg bucket
  2. 2 Release agent

    Apply Desmocem® Powder or Liquid to the textured face of the mould so the material does not stick.

  3. 3 Stamping

    Place the mould and press firmly and evenly with your weight, the tamper or a roller.

    Imacem® Pison
  4. 4 Demoulding

    Carefully remove the mould once setting has begun, so as not to deform the relief. Clean it with water.

    Imacem® European fan mold 118x70cm blue
  5. 5 Sealing

    Once the surface has set and is dry, protect and enhance the finish with a sealer such as Sealcem® or Topsealer®.

    Sealcem® WT S70 25L

Imacem products

120 products

Frequently asked questions about Imacem

What products does the Imacem® range include?
Imacem® brings together moulds for stamping decorative textures onto fresh printed concrete (fan, cobblestone, tile, roadway, border, slab, wood, blanket, stone or ashlar) and the tools to apply them: texturing rollers, tamper, trowels, Orbitel, edger, hook and power trowel pans.
What materials and surfaces can I use Imacem® moulds on?
They are designed for fresh printed concrete, and many models also work for microcement and decorative mortars. Most moulds can be used on floors and walls, indoors and outdoors; check each model's description, as some are mainly intended for outdoor paving.
How do I use an Imacem® mould?
With the fresh concrete levelled, apply release agent to the textured face of the mould, place it and press firmly and evenly (with your weight, the tamper or a roller). Remove it carefully once setting has begun so as not to deform the relief.
Do I need release agent to work with the moulds?
Yes, we recommend applying release agent before stamping to prevent the material from sticking to the mould. You can use Desmocem® Powder or Liquid depending on the project.
What do I do after stamping the texture?
Once the surface has set and is dry, apply pigments and sealers according to the decorative system you are using. To protect and enhance the finish, a sealer such as TOPSEALER is recommended.
How do I clean and store the moulds?
Clean them with water after each use and dry them well before storing. Store them flat, in a clean, dry place, away from direct sunlight and heat sources, so they keep their shape.
Complete your project

Related ranges

Stonecem→Sealcem→Topsealer→Arcocem→

Our Topciment Categories

Varnishes for stamped concrete
Varnishes for stamped concrete
Self-leveling
Self-leveling
Pigments
Pigments
Paints
Paints
Microcement
Microcement
Two-component microcement
Two-component microcement