ES
FR
IT
PT
DE
CS
DA
NL
NO
FI
SV
Calculator
How much Stonecem do you need?
Consumption used: 1.8 kg/m² per coat
You need approx.
We recommend
Total
Estimate including a 10% margin. Actual consumption depends on the substrate and application.
Stonecem® Floor Cement 25 Kg is a high-performance thixotropic decorative mortar, formulated for creating continuous surfaces on interior floors and walls. Its cement color provides a neutral, modern, and timeless finish, ideal for contemporary interior design projects seeking a balance between functionality and industrial aesthetics.
This product belongs to the Stonecem® Floor family, specializing in coating solutions with volume and personalized relief. Thanks to its manual trowel application, it allows for unique jointless artisanal finishes with high durability and resistance.
Application data
Recommended coats2
Consumption per coat1.8 kg/m²
Time between coats
- Check that the substrate is clean, dry, and stable.
- Apply primer if the substrate requires it.
- Mix the product with clean water until a homogeneous paste is obtained.
- Apply manually with a metal trowel, molding the desired texture while wet.
- Allow to dry completely before any additional treatment.
Coverage
Approximately 1.8 Kg/m²/mm, depending on the texture applied.
Technical Specifications
- Appearance: colored powder (Cement)
- Composition: cements, selected aggregates, mineral pigments, and additives
- pH (mixture): 12 ± 1
- Powder density: 1.35 ± 0.05 g/cm³
- Application time: ~60 minutes
- Touch dry: 2–4 hours
- Full cure: 7 days
- Format: 25 kg bucket
Storage Conditions
Store in its original sealed container, in a dry and ventilated place, at temperatures between 5 °C and 30 °C. Shelf life: up to 12 months from the manufacturing date.
- Microcement manufacturers
- 17+ years of experience
- ISO 9001
- ISO 14001
Payment methods
100% secure, encrypted payment with any of the methods shown above.
Delivery times
| Spain | 3-5 working days |
|---|---|
| Europe | 5-10 working days |
| Rest of the world | 10-20 working days |
Orders placed before 11:00 (Spanish time) ship the same working day.
Approximate times; they may vary depending on the destination.
Shipping costs
Calculated automatically at checkout based on the destination and the weight of the order.
See shipping policy →
14 calendar days
to return from the day you receive your order
Unused product
and in perfect condition
Return shipping costs
paid by the customer, unless the product is defective or incorrect
How to return a product
- Fill in our returns and incidents form.
- Give your order number and the reason for the return.
- Send the product back unused and in perfect condition.
Frequently asked questions about Stonecem
What is Stonecem® Floor and what is it used for?
It is a decorative mortar for printed concrete used as a hardener or wearing course on new printed concrete floors. It offers high mechanical performance, high abrasion resistance and a mineral, matt, non-slip finish.
Can it be used outdoors?
Yes. Stonecem® Floor is suitable for both indoor and outdoor use: it is weather- and UV-resistant, and works for pavements, terraces, porches, swimming pools, car parks or areas with heavy vehicle and pedestrian traffic.
How is Stonecem® Floor applied?
It is sprinkled over the fresh concrete once the bleed water has evaporated: first 2/3 of the quantity, worked in with a float, then the rest, and smoothed with a steel trowel. Then the release agent is applied and it is stamped with the moulds.
What other products do I need to make printed concrete with Stonecem® Floor?
You need a release agent, Desmocem® Powder or Desmocem® Liquid, Imacem® moulds to stamp the texture and, for protection, Sealcem® WT or Sealcem® DSV sealer. If you want an extra decorative finish you can use the Oxicem® Concrete system.
When is the release agent removed and how is the floor protected?
After at least 48 hours, remove the release agent: with a pressure washer if you used Desmocem® Powder, or by sweeping if you used Desmocem® Liquid. With the surface dry, apply at least two coats of Sealcem® WT or DSV and let it harden for 3 days before use.
What textures and finishes can I achieve?
With Imacem® moulds you can stamp it in more than 100 different finishes and textures. The result is a floor with a mineral, matt, non-slip look, available in a wide range of colours.
What is the coverage of Stonecem® Floor cemento bucket?
Approximately 1.8 kg/m² per coat; 2 coats are recommended. Actual consumption depends on the substrate and application. Use the calculator above to work out how much you need.
Where can I find the technical data sheet for Stonecem® Floor cemento bucket?
You can download the technical data sheet (PDF) with all the application details.
Recently viewed
Don't forget! The products you saw. Add them to your cart now.
People also bought
Here are some of our most similar products that people are buying.