Naturcem® Low 5L Blue
Naturcem

Naturcem® Low 5L Blue

Naturcem® Low 5L Blue is a liquid acrylic additive in aqueous dispersion, formulated to act as a curing agent and surface protector in cementitious coatings, mortars, and decorative multi-layer systems.

€73,28

VAT included

Size
5 L €73,28 25 L €332,51
Range
Naturcem
SKU
TT11204
Content
5 L
Coverage
0.2 L/m² per coat
PDFTechnical data sheet
Calculator

How much Naturcem do you need?

Consumption used: 0.2 L/m² per coat

You need approx.
We recommend
    Total

    Estimate including a 10% margin. Actual consumption depends on the substrate and application.

    Naturcem® Low 5L Blue is an acrylic liquid additive in aqueous dispersion, formulated to act as a curing agent and surface protector for cementitious coatings, mortars, and decorative multi-layer systems. Its blue color facilitates visual application and ensures homogeneous distribution over the entire treated surface.

    This curing agent has been designed to minimize surface cracking, improve mortar cohesion during drying, and optimize the progressive hardening of the material. Its use is especially recommended in combination with microcements such as those from the Sttandard, Evoluttion ranges, or as part of the Naturcem system, when precise control of water evaporation during curing is required.


    Frequently asked questions about Naturcem

    What is Naturcem® and what is it used for?
    It is a water-based surface retarder for concrete. It delays the setting of the cement in the surface layer so that, after washing it off, the aggregate is exposed and you get a decorative finish with a natural, non-slip texture.
    What is the difference between Naturcem® Low, Medium and High?
    The etching grade changes with the aggregate size: Low (blue) grade 2 for 5-8 mm aggregates, Medium (pink) grade 4 for 10-14 mm and High (yellow) grade 5 for 14-18 mm. We recommend a test on site to adjust the depth.
    Where can I use Naturcem®?
    It is designed for decorative concrete paving, such as urban areas, pavements and outdoor surfaces, as well as street furniture and exposed-aggregate coatings.
    How is Naturcem® applied?
    It comes ready to use: shake it and spray it evenly onto the smoothed fresh concrete once the bleed water has disappeared (about 30 minutes after pouring), with a 0.79 mm nozzle at 2-4 bar. Avoid puddles and thick coats.
    When and how is the surface washed to reveal the aggregate?
    Between 3 and 24 hours after applying it, depending on temperature, sun and wind, wash with pressure water (100-150 bar) from 20-40 cm and at a 45° angle to remove the surface laitance.
    Do I need to protect the surrounding areas, and in what conditions can I apply it?
    It is biodegradable and solvent-free, and there is no need to protect the surroundings except painted façades and porous surfaces. Apply it with air and substrate temperatures between 5 °C and 30 °C and without excessive wind; the equipment is cleaned with water.
    What is the coverage of Naturcem® Low Blue?
    Approximately 0.2 L/m² per coat; 2 coats are recommended. Actual consumption depends on the substrate and application. Use the calculator above to work out how much you need.
    Which sizes is Naturcem® Low Blue sold in?
    In 5 L · 25 L, from €73,28.
    Where can I find the technical data sheet for Naturcem® Low Blue?
    You can download the technical data sheet (PDF) with all the application details.

    Recently viewed

    Don't forget! The products you saw. Add them to your cart now.

    People also bought

    Here are some of our most similar products that people are buying.