Component A Primapox® 100 BASIC 12Kg ADR
Low-viscosity, 100 % solids two-component epoxy primer for porous and mineral substrates; bonding bridge before resin finishes. Component A (resin), mixed 3:2 with Component B.
VAT included
AComponent A Primapox® 100 BASIC 12Kg ADR
- Range
- Primapox
- SKU
- TT03035
- Coverage
- 0.3 kg/m² per coat
How much Primapox do you need?
Consumption used: 0.3 kg/m² per coat
Estimate including a 10% margin. Actual consumption depends on the substrate and application.
Primapox® 100 BASIC Component A is the resin of a low-viscosity, 100 % solids two-component epoxy primer for porous and mineral substrates (concrete, mortar, etc.). It is used as a primer and bonding bridge before epoxy, polyurethane or acrylic resin finishes, as the base coat of multilayer and anti-slip systems, and to prepare dry mortars for patching or grouting.
Coverage
Generally 0.2 – 0.4 kg/m², depending on the use and the roughness and porosity of the substrate.
Technical specifications
- Composition: bisphenol A/F epoxy resin, 100 % solids
- Mixing ratio: 3 (A) : 2 (B) by weight
- Appearance: transparent
- Mix density: 1.08 ± 0.02 g/cm³
- Mix viscosity (23 °C): 600 ± 100 mPa·s
- Pot life (23 °C): 20 ± 5 minutes
- Touch dry (23 °C): 6-8 h
- Full cure (23 °C): 7 days
- Shore D hardness at 7 days: 81
- Application temperature: between 8 and 30 °C
- Pack size: 12 kg (Component A)
- Substrate: dry, clean and free from dust and grease. Do not apply at 8 °C or below or at relative humidity above 70 % (blushing or amine blush may occur).
- Mixing: add Component B (8 kg) to Component A in a ratio of 3:2 by weight (60 g of resin + 40 g of hardener) and mix for 2-3 minutes with a low-speed mixer. Pour into another clean container and mix again.
- Application: pour onto the substrate and spread with a trowel, notched trowel, rubber squeegee, roller or brush. De-aerate with a spiked roller to remove bubbles. For high thicknesses, apply coats of 0.5-1 kg/m², allowing each coat to harden before the next.
- Anti-slip or multilayer: broadcast quartz to saturation into the fresh primer; once dry, vacuum off the excess and seal with a further coat.
- Colour: if desired, add ARCOCEM® DYE to Component A before mixing with the hardener.
- Microcement manufacturers
- 17+ years of experience
- ISO 9001
- ISO 14001
Payment methods
100% secure, encrypted payment with any of the methods shown above.
Delivery times
| Spain | 3-5 working days |
|---|---|
| Europe | 5-10 working days |
| Rest of the world | 10-20 working days |
Orders placed before 11:00 (Spanish time) ship the same working day.
Approximate times; they may vary depending on the destination.
Shipping costs
Calculated automatically at checkout based on the destination and the weight of the order.
See shipping policy →How to return a product
- Fill in our returns and incidents form.
- Give your order number and the reason for the return.
- Send the product back unused and in perfect condition.
Frequently asked questions about Primapox
What is Primapox?
What is the difference between Primapox 100 BARRIER and Primapox 100 FLUID?
Do I need to buy both Component A and Component B?
How is it applied?
Which products is it compatible with?
What is the coverage of Component A Primapox® BASIC?
Which sizes is Component A Primapox® BASIC sold in?
Where can I find the technical data sheet for Component A Primapox® BASIC?
Recently viewed
Don't forget! The products you saw. Add them to your cart now.
People also bought
Here are some of our most similar products that people are buying.
ES
FR
IT
PT
DE
CS
DA
NL
NO
FI
SV
