Stonecem® Floor oliva 25Kg
Stonecem

Stonecem® Floor oliva 25Kg

Stonecem® Floor Olive 25 Kg is a thixotropic decorative mortar specially designed for interior coatings with texture. Its olive hue adds a natural and earthy character to surfaces, evoking sophisticated environments with contemporary architecture.

€40,14

VAT included

Range
Stonecem
SKU
TT11712
Content
25 kg
Coverage
1.8 kg/m² per coat
PDFTechnical data sheet
Calculator

How much Stonecem do you need?

Consumption used: 1.8 kg/m² per coat

You need approx.
We recommend
    Total

    Estimate including a 10% margin. Actual consumption depends on the substrate and application.

    Stonecem® Floor Oliva 25 Kg is a thixotropic decorative mortar specifically designed for interior textured coatings. Its olive tone adds a natural and earthy character to surfaces, evoking sophisticated environments with contemporary architecture.

    This product is part of the Stonecem® Floor range, developed for space theming through manual application. Thanks to its moldable texture and quick drying, it allows for working the finish with tools such as the metal trowel, creating handcrafted effects without joints.


    Frequently asked questions about Stonecem

    What is Stonecem® Floor and what is it used for?
    It is a decorative mortar for printed concrete used as a hardener or wearing course on new printed concrete floors. It offers high mechanical performance, high abrasion resistance and a mineral, matt, non-slip finish.
    Can it be used outdoors?
    Yes. Stonecem® Floor is suitable for both indoor and outdoor use: it is weather- and UV-resistant, and works for pavements, terraces, porches, swimming pools, car parks or areas with heavy vehicle and pedestrian traffic.
    How is Stonecem® Floor applied?
    It is sprinkled over the fresh concrete once the bleed water has evaporated: first 2/3 of the quantity, worked in with a float, then the rest, and smoothed with a steel trowel. Then the release agent is applied and it is stamped with the moulds.
    What other products do I need to make printed concrete with Stonecem® Floor?
    You need a release agent, Desmocem® Powder or Desmocem® Liquid, Imacem® moulds to stamp the texture and, for protection, Sealcem® WT or Sealcem® DSV sealer. If you want an extra decorative finish you can use the Oxicem® Concrete system.
    When is the release agent removed and how is the floor protected?
    After at least 48 hours, remove the release agent: with a pressure washer if you used Desmocem® Powder, or by sweeping if you used Desmocem® Liquid. With the surface dry, apply at least two coats of Sealcem® WT or DSV and let it harden for 3 days before use.
    What textures and finishes can I achieve?
    With Imacem® moulds you can stamp it in more than 100 different finishes and textures. The result is a floor with a mineral, matt, non-slip look, available in a wide range of colours.
    What is the coverage of Stonecem® Floor oliva?
    Approximately 1.8 kg/m² per coat; 2 coats are recommended. Actual consumption depends on the substrate and application. Use the calculator above to work out how much you need.
    Where can I find the technical data sheet for Stonecem® Floor oliva?
    You can download the technical data sheet (PDF) with all the application details.

    Recently viewed

    Don't forget! The products you saw. Add them to your cart now.

    People also bought

    Here are some of our most similar products that people are buying.