Polypropylene fiber for stamped concrete Top 12mm - 0.6KG

The Top 12mm polypropylene fiber, specially designed for reinforcing stamped concrete, microcement, and decorative mortars, significantly improves structural resistance against cracks, shrinkage, and mechanical stress. Its 0.6 kg bag presentation allows for precise dosing for technical uses, ensuring continuous finishes without compromising the aesthetic of the substrate.

Main features

• Modified polypropylene fiber with a length of 12 mm for effective three-dimensional reinforcement.
• High thermal stability (up to 170 °C) and chemical resistance to alkalis.
• Integral mass effect to improve cohesion and reduce cracking derived from curing.
• Presented in a 0.6 kg bag, facilitating exact dosage control in small projects or repairs.

Instructions for use

1. Incorporate the fiber directly into the concrete or mortar after adding aggregate and cement in the mixer or concrete mixer.
2. Mix at maximum speed for at least 3–5 minutes to ensure uniform distribution.
3. Proceed with the application of the material according to the specifications of the decorative system, respecting joints and thicknesses.

Yield

Each 0.6 kg bag is sufficient to dose 1 m³ of mix at the recommended proportion (0.6 kg/m³).

Technical specifications

• Material: 100% modified polypropylene.
• Length: 12 mm.
• Density: 0.90 g/cm³.
• Melting temperature: 163–170 °C.
• Elongation at break: < 80%.
• 0.6 kg bag suitable for 1 m³ of concrete or mortar.
• Intended use: reinforcement of stamped concrete, microcement, and mortars in decorative works.

Storage conditions

Store in its original packaging, in a dry and ventilated place, avoiding direct sunlight and extreme temperatures, ideally between 10 °C and 30 °C.