{"title":"Topsealer","description":null,"products":[{"product_id":"componente-a-topsealer-wt-dragon-mate-3l","title":"Component A Topsaler WT Dragon Mate 3L","description":"\u003cp\u003eTwo-component water-based polyurethane varnish with a matte finish. Designed to protect microcement surfaces, it offers high resistance to wear and chemical products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTopsealer WT Dragon Matte\u003c\/strong\u003e is a two-component water-based polyurethane varnish specifically developed to protect microcement coatings. This product ensures a resistant protective layer, extending the service life of the finish and enhancing its appearance with a natural matte finish. Ideal for indoor and outdoor floors and walls.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHigh mechanical resistance:\u003c\/strong\u003e Protects against wear, scratches, and chemical products.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eNatural matte finish:\u003c\/strong\u003e Provides a uniform and elegant appearance.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eEasy application:\u003c\/strong\u003e Compatible with brush, roller, or spray gun.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eVersatility:\u003c\/strong\u003e Suitable for microcement, concrete, wood, and other materials.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDurable protection:\u003c\/strong\u003e Improves impermeability and resistance to foot traffic.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e1. Surface preparation:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eEnsure the surface is dry, clean, and free of dust or grease.\u003c\/li\u003e\n\n\u003cli\u003eApply a coat of \u003cstrong\u003ePresealer\u003c\/strong\u003e if the substrate requires prior sealing.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2. Mixing the product:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eMix component A (Topsealer WT Dragon Matte) with component B in a 5:1 ratio.\u003c\/li\u003e\n\n\u003cli\u003eStir slowly for 2-3 minutes with a low-speed mixer until a homogeneous mixture is obtained.\u003c\/li\u003e\n\n\u003cli\u003eLet the mixture sit for 5-10 minutes before application.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e3. Application:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\n\u003cli\u003eApply the first coat with a 4 mm microfiber roller or a brush, distributing the product evenly.\u003c\/li\u003e\n\n\u003cli\u003eLet it dry for 8 to 12 hours depending on temperature and humidity.\u003c\/li\u003e\n\n\u003cli\u003eApply a second coat following the same procedure.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003e4. Curing and sealing:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eAvoid contact with water during the first 72 hours after application.\u003c\/li\u003e\n\n\u003cli\u003eFull curing is achieved after 7 days.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSmooth surfaces:\u003c\/strong\u003e 0.10-0.12 L\/m² per coat.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePorous surfaces:\u003c\/strong\u003e Up to 0.15 L\/m² per coat.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.02 ± 0.01 g\/cm³.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTouch-dry time:\u003c\/strong\u003e 30-60 minutes.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eChemical resistance:\u003c\/strong\u003e High.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBase:\u003c\/strong\u003e Water-based polyurethane.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eStore in a cool, dry place, between 10°C and 30°C.\u003c\/li\u003e\n\n\u003cli\u003eShelf life: 12 months in its original, unopened container.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781649998205,"sku":"TT02102","price":161.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-3L-Dragon-Mate_1.avif?v=1780928558"},{"product_id":"componente-a-topsealer-wt-dragon-brillo-3l","title":"Component A Topsealer WT Dragon Gloss 3L","description":"\u003cp\u003eTwo-component water-based polyurethane varnish with a glossy finish. Designed to protect microcement surfaces, it offers high resistance to wear, chemical agents, and scratching without yellowing. Compatible with multiple substrates such as wood, parquet, stamped concrete, or microcement, its formulation with hydroxylated polyester resins and isocyanates allows it to maintain vapor breathability and ensures durability both indoors and outdoors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eComponent A\u003c\/strong\u003e must be mixed with \u003cstrong\u003eComponent B\u003c\/strong\u003e in a 3:1 ratio (by weight) by gently stirring and allowed to rest for 30 minutes before application. Its pot life is 60 minutes at 20 °C. It is applied in two coats (14–24 h between them), with a total coverage of 5‑8 m²\/L (two coats), and dries completely after 7 days, achieving a Persoz hardness of 250 s. Ideal for high-traffic areas, humid areas, and embellishing industrial surfaces with a deep glossy finish.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntense Gloss:\u003c\/strong\u003e Glossy finish that enhances the color and texture of the substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Chemical and Mechanical Resistance:\u003c\/strong\u003e Protects against water, alkalis, bleach, oil, vinegar, wine, and alcohol without visible marks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-yellowing:\u003c\/strong\u003e Maintains transparency even outdoors with sun exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible and Breathable:\u003c\/strong\u003e Applicable on microcement, wood, concrete, and parquet, respecting vapor breathability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Professional Application:\u003c\/strong\u003e Can be applied with a brush, roller, or spray gun; quick and easy mixing, ideal for indoor and outdoor projects.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for Use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake \u003cstrong\u003eComponent A\u003c\/strong\u003e and let it rest for 30 minutes.\u003c\/li\u003e\n\u003cli\u003eMix with \u003cstrong\u003eComponent B\u003c\/strong\u003e in a 3:1 ratio (by weight), stirring at low speed.\u003c\/li\u003e\n\u003cli\u003eApply two coats, allowing 14‑24 hours drying time between them.\u003c\/li\u003e\n\u003cli\u003eObserve application temperature between 15 °C and 30 °C.\u003c\/li\u003e\n\u003cli\u003eFull cure in 7 days to achieve complete resistance.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5–8 m²\/L\u003c\/strong\u003e in total for two correctly applied coats.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature Comp. A:\u003c\/strong\u003e Water-based polyacrylate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.03 ± 0.01 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity (23 °C):\u003c\/strong\u003e 130–150 mPa·s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids Comp. A:\u003c\/strong\u003e 22–23 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH Comp. A:\u003c\/strong\u003e 7–8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life:\u003c\/strong\u003e 60 min at 20 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersoz Hardness (7 days):\u003c\/strong\u003e 250 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC (A+B):\u003c\/strong\u003e \u0026lt; 5 g\/L\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a cool, dry place, protected from direct sunlight, between 10 °C and 30 °C. Keep in its original closed container. Shelf life of 12 months from manufacturing.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781650456957,"sku":"TT02100","price":161.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-3L-Dragon-Brillo.jpg?v=1780928397"},{"product_id":"componente-a-topsealer-wt-dragon-satinado-3l","title":"Component A Topsealer WT Dragon Satin 3L","description":"\u003cp\u003eTopsealer WT Dragon is a two-component water-based polyurethane varnish with a satin finish, designed to protect continuous coatings such as microcement, concrete, wood, or parquet. Its formula combines component A (aqueous dispersion) with component B (isocyanate), achieving a highly resistant protective layer against wear, abrasion, and household chemicals. It does not yellow, is suitable for indoor and outdoor use, and improves the durability of finishes, maintaining their appearance over time.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural satin finish\u003c\/strong\u003e, which enhances the texture of the coating without excessive reflections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh resistance to wear\u003c\/strong\u003e, scratching, water, and chemical agents such as vinegar, bleach, wine, or oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not yellow\u003c\/strong\u003e, even with exposure to sunlight, so it can be applied outdoors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for multiple substrates\u003c\/strong\u003e: microcement, parquet, natural wood, concrete, etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-based product\u003c\/strong\u003e with low VOC content, safer for the applicator and the environment.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: it must be clean, dry, and free of grease or dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing\u003c\/strong\u003e: combine Component A with Component B in the proportion indicated by the manufacturer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: apply in two thin coats with a roller, brush, or spray gun.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying\u003c\/strong\u003e: allow to dry between coats for the recommended time according to temperature and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull curing\u003c\/strong\u003e: do not expose to direct contact with water or heavy use until the days indicated by the manufacturer have passed.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eBetween \u003cstrong\u003e5 and 8 m²\/L\u003c\/strong\u003e for both coats combined, depending on the type of substrate and application conditions.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type\u003c\/strong\u003e: Two-component water-based polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Indoor and outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible substrates\u003c\/strong\u003e: Microcement, wood, parquet, concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance\u003c\/strong\u003e: Water, scratching, household chemicals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content\u003c\/strong\u003e: Low\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-yellowing\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio\u003c\/strong\u003e: To be specified according to the manufacturer's technical data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore the product in its original closed container, in a dry and ventilated place, protected from sunlight and at a temperature between 10 °C and 30 °C. Shelf life is \u003cstrong\u003e12 months\u003c\/strong\u003e if the container has not been opened.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781650489725,"sku":"TT02101","price":161.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-3L-Dragon-Satin.jpg?v=1780928501"},{"product_id":"componente-b-topsealer-r-dsv-1l-lq","title":"Component B Topsealer® DSV 1L LQ","description":"\u003cp\u003e\u003cstrong\u003eComponent B Topsealer® DSV 1 L\u003c\/strong\u003e is an aliphatic isocyanate hardener formulated as part of the two-component \u003cstrong\u003eTopsealer® DSV\u003c\/strong\u003e sealing system, ideal for protecting surfaces coated with microcement, wood, parquet, or decorative concrete. Thanks to its high chemical and mechanical resistance, this component guarantees a durable seal against abrasion, scratching, and cleaning agents, without altering the color or finish of the coating. It is part of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer\"\u003eTopsealer®\u003c\/a\u003e family of high-performance varnishes for interiors and exteriors.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecific aliphatic hardener for Topsealer® DSV. \u003c\/li\u003e\n\u003cli\u003eImproves resistance to wear, scratching, and chemical agents. \u003c\/li\u003e\n\u003cli\u003eDoes not yellow when exposed to sunlight. \u003c\/li\u003e\n\u003cli\u003eCompatible with matte, satin, and gloss finishes. \u003c\/li\u003e\n\u003cli\u003eProvides a durable and aesthetic protective film. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake component A well before adding component B. \u003c\/li\u003e\n\u003cli\u003eMix in a 2 parts A to 1 part B ratio by weight. \u003c\/li\u003e\n\u003cli\u003eStir mechanically for at least 2 minutes until a homogeneous mixture is obtained. \u003c\/li\u003e\n\u003cli\u003eApply with a microfiber roller or spray gun, on clean and dry surfaces. \u003c\/li\u003e\n\u003cli\u003eWait between 8 and 24 hours between coats, respecting temperature (10–30 °C) and ambient humidity conditions. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApprox. 0.17 L\/m² on smooth surfaces such as Microfino. \u003c\/li\u003e\n\u003cli\u003eUp to 0.25 L\/m² on rougher surfaces such as Microstone, in two coats. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: aliphatic isocyanate hardener. \u003c\/li\u003e\n\u003cli\u003eMixing ratio: 2:1 with component A. \u003c\/li\u003e\n\u003cli\u003eViscosity: 20 s (Ford Cup 4). \u003c\/li\u003e\n\u003cli\u003eKönig hardness (14 days): 120 s. \u003c\/li\u003e\n\u003cli\u003eSolids: Component B 39 %. \u003c\/li\u003e\n\u003cli\u003ePot life: 1 h at 20 °C. \u003c\/li\u003e\n\u003cli\u003eApplication temperature: between 10 and 30 °C. \u003c\/li\u003e\n\u003cli\u003eFinish: colorless (depending on the type of component A used: matte, satin or gloss). \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore the product in its original container, tightly closed, in a dry, ventilated place, protected from sunlight. Ideal temperature between 10 °C and 30 °C. It has a shelf life of 12 months from its manufacturing date.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781655437693,"sku":"TT02012","price":60.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/ComponenteBtopsealerDSV1L.jpg?v=1776941399"},{"product_id":"componente-b-topsealer-r-wt-one-coat-1l","title":"Component B Topsealer® WT One Coat 1L","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® WT One Coat Component B 1 L\u003c\/strong\u003e is the \u003cstrong\u003ewater-based polyalkyd hardener reactive\u003c\/strong\u003e designed to complete the two-component varnish system of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer\"\u003eTopsealer®\u003c\/a\u003e family. It provides rigidity, chemical resistance, and durability to the sealing of floors and walls coated with microcement, stamped concrete, wood, or parquet. It improves protection against wear, stains, and yellowing, while maintaining the breathability of the coating.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecific hardener for \u003cstrong\u003eWT One Coat\u003c\/strong\u003e systems.\u003c\/li\u003e\n\u003cli\u003eTransforms the base into a film resistant to abrasion, scratching, and chemical agents.\u003c\/li\u003e\n\u003cli\u003eCompatible with matte, satin, gloss, and super matte finishes.\u003c\/li\u003e\n\u003cli\u003eAnti-UV, no yellowing over time.\u003c\/li\u003e\n\u003cli\u003eDesigned to protect continuous coatings indoors and outdoors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake component A well before adding hardener B.\u003c\/li\u003e\n\u003cli\u003eMix in a ratio of 5 parts (A) to 1 part (B) by weight.\u003c\/li\u003e\n\u003cli\u003eStir gently until a homogeneous mixture is achieved.\u003c\/li\u003e\n\u003cli\u003eApply with a roller, brush, or spray gun, observing drying times between coats (minimum 14 h, maximum 24 h).\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRecommended application (2 coats): approx. 0.15 L\/m² of mixture (A + B).\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: water-based polyalkyd hardener\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids\u003c\/strong\u003e: 100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: ~1.05 g\/cm³ at 25 °C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in original sealed container, in a dry, ventilated place protected from light. Ideal temperature between 10 °C and 30 °C. Shelf life: up to 12 months from the date of manufacture.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781655568765,"sku":"TT02016","price":101.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer_WT_B.png?v=1779892092"},{"product_id":"componente-a-topsealer-r-dsv-satinado-4l-lq","title":"Component A Topsealer® DSV Satin 4L LQ","description":"\u003cp\u003e\u003cstrong\u003eComponent A Topsealer® DSV Satin 4 L LQ\u003c\/strong\u003e is the acrylic base of the two-component solvent-based polyurethane varnish system for microcement, offering a \u003cstrong\u003ehigh-quality satin finish\u003c\/strong\u003e. Designed to enhance the colors of continuous coatings, facades, and microcement floors, it provides protection resistant to wear, water, scratches, and UV exposure, maintaining an elegant and technical appearance.\u003c\/p\u003e\u003cp\u003eThis product is part of the \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer\"\u003eTopsealer®\u003c\/a\u003e\u003c\/strong\u003e range and must be mixed with \u003cstrong\u003ehardener B\u003c\/strong\u003e to obtain an effective sealing system for both indoor and outdoor use, ideal for design projects, continuous flooring, and professional decorative microcement.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTransparent acrylic base for two-component solvent-based varnish.\u003c\/li\u003e\n\u003cli\u003eSatin finish that enhances color without excessive shine.\u003c\/li\u003e\n\u003cli\u003eHigh resistance to abrasion, scratches, and water.\u003c\/li\u003e\n\u003cli\u003eUnaffected by ultraviolet light (does not yellow).\u003c\/li\u003e\n\u003cli\u003eCompatible with microcement and concrete systems.\u003c\/li\u003e\n\u003cli\u003eConvenient 4 L format ready to mix.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake component A well before use.\u003c\/li\u003e\n\u003cli\u003eMechanically mix with hardener B in a 2 kg of A to 1 kg of B ratio.\u003c\/li\u003e\n\u003cli\u003eStir until a homogeneous mixture is obtained, avoiding craters or differences in shine.\u003c\/li\u003e\n\u003cli\u003eApply with a spray gun or short velour roller at a temperature between 10–30 °C.\u003c\/li\u003e\n\u003cli\u003eLightly sand (400 grit) the first coat after 8 hours and do not exceed 2 days before the next coat.\u003c\/li\u003e\n\u003cli\u003eRespect the pot life of the mixture (2 hours) and drying times (24–48 hours).\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eConsumption per microcement system\u003c\/strong\u003e:\u003cul\u003e\n\u003cli\u003eMicrofino: 0.17 L\/m²\u003c\/li\u003e\n\u003cli\u003eMicrodeck: 0.20 L\/m²\u003c\/li\u003e\n\u003cli\u003eMicrostone: 0.25 L\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance of dry film\u003c\/strong\u003e: transparent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio\u003c\/strong\u003e: A:B = 2:1 (weight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid content\u003c\/strong\u003e: A = 40%, B = 39%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKonig hardness (14 days)\u003c\/strong\u003e: 120 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFord Cup 4 Viscosity\u003c\/strong\u003e: 20 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature\u003c\/strong\u003e: 10–30 °C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in its original packaging, tightly closed and in a dry, ventilated, and dark place. Recommended temperature between 10–30 °C. Shelf life: \u003cstrong\u003e12 months\u003c\/strong\u003e from manufacturing if kept under these conditions.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781655667069,"sku":"TT02017","price":190.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-DSV-A-Satin.jpg?v=1773752417"},{"product_id":"componente-a-topsealer-r-dsv-brillo-4l-lq","title":"Component A Topsealer® DSV Gloss 4L LQ","description":"\u003cp\u003e\u003cstrong\u003eComponent A Topsealer® DSV Gloss 4 L LQ\u003c\/strong\u003e is a two-component solvent-based polyurethane varnish specially formulated to offer superior protection and a glossy finish on microcement coatings, decorative concrete or mineral surfaces. This high chemical and mechanical resistance sealer is part of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer%C2%AE\"\u003eTopsealer® DSV\u003c\/a\u003e range, recognized for its durability and ability to preserve the aesthetic of the substrate with a high gloss finish. Ideal for interior and exterior spaces with high functional and decorative demands.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSolvent-based polyurethane\u003c\/strong\u003e two-component varnish with a glossy finish.\u003c\/li\u003e\n\u003cli\u003eHigh resistance to \u003cstrong\u003ewear, abrasion, scratching and chemicals\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003cstrong\u003emicrocement\u003c\/strong\u003e decorative systems, especially with products such as \u003cstrong\u003eSttandard\u003c\/strong\u003e and \u003cstrong\u003eEvoluttion\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eExcellent \u003cstrong\u003eadhesion and hardness\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIdeal for indoor and outdoor application.\u003c\/li\u003e\n\u003cli\u003eProvides an \u003cstrong\u003eimpermeable\u003c\/strong\u003e and easy-to-clean surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eEnsure the surface is dry, clean, and free of dust, grease, or other contaminants.\u003c\/li\u003e\n\u003cli\u003eShake Component A well before mixing.\u003c\/li\u003e\n\u003cli\u003eMix Component A with Component B in the indicated proportion.\u003c\/li\u003e\n\u003cli\u003eLet the mixture rest for a few minutes before application.\u003c\/li\u003e\n\u003cli\u003eApply with a specific varnish roller in thin and even coats, respecting drying times between coats.\u003c\/li\u003e\n\u003cli\u003eDo not apply at temperatures below 10 °C or above 30 °C. Avoid humid environments during application.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e0.12 L\/m²\u003c\/strong\u003e per coat (may vary depending on the porosity of the substrate and the applied system).\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 4 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance\u003c\/strong\u003e: colorless liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition\u003c\/strong\u003e: aliphatic solvent-based polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: roller or spray gun\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in its original, tightly closed container, in a dry and ventilated place, between 5 °C and 30 °C. Keep away from heat sources and direct sunlight.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781655732605,"sku":"TT02018","price":190.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-DSV-A-Brillo.jpg?v=1773752414"},{"product_id":"componente-a-topsealer-r-dsv-mate-4l-lq","title":"Component A Topsealer® DSV Matte 4L LQ","description":"\u003cp\u003eThe \u003cstrong\u003eTopsealer® DSV Matte 4 L LQ Component A\u003c\/strong\u003e is a two-component solvent-based polyurethane varnish, designed to protect \u003cstrong\u003emicrocement\u003c\/strong\u003e, \u003cstrong\u003edecorative concrete\u003c\/strong\u003e, and other mineral substrates. Its matte finish provides a natural and sophisticated aesthetic, ideal for contemporary environments where a non-glossy look is desired. This component is part of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer%C2%AE\"\u003eTopsealer® DSV\u003c\/a\u003e system, known for its high mechanical and chemical resistance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eTwo-component solvent-based polyurethane\u003c\/strong\u003e varnish with a matte finish.\u003c\/li\u003e\n\u003cli\u003eHigh \u003cstrong\u003eresistance to abrasion, scratching, and household chemicals\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eProvides \u003cstrong\u003elong-lasting protection\u003c\/strong\u003e without altering the texture of the coating.\u003c\/li\u003e\n\u003cli\u003eCompatible with decorative finishes on \u003cstrong\u003emicrocement\u003c\/strong\u003e such as \u003cstrong\u003eSttandard\u003c\/strong\u003e and \u003cstrong\u003eEvoluttion\u003c\/strong\u003e systems.\u003c\/li\u003e\n\u003cli\u003eSuitable for indoor and outdoor use.\u003c\/li\u003e\n\u003cli\u003eEasy to apply with a roller or spray gun.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eClean and thoroughly dry the surface before application.\u003c\/li\u003e\n\u003cli\u003eShake Component A well.\u003c\/li\u003e\n\u003cli\u003eMix with Component B in the established proportion.\u003c\/li\u003e\n\u003cli\u003eAllow the mixture to rest for a few minutes before applying.\u003c\/li\u003e\n\u003cli\u003eApply with a 4 mm microfiber roller or spray gun in thin, even coats.\u003c\/li\u003e\n\u003cli\u003eObserve drying times between coats and do not apply at extreme temperatures or in humid environments.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e0.12 L\/m² per coat\u003c\/strong\u003e, depending on the type of substrate and its absorption.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 4 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance\u003c\/strong\u003e: homogeneous liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: matte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical nature\u003c\/strong\u003e: aliphatic solvent-based polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: roller or spray gun\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore the product in its original sealed container, in a cool, dry, and ventilated place, between 5 °C and 30 °C. Avoid direct exposure to sunlight and heat sources.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781655798141,"sku":"TT02019","price":190.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-DSV-A-Mate.jpg?v=1773752412"},{"product_id":"componente-a-topsealer-r-wt-one-coat-brillo-5l","title":"Component A Topsealer® WT One Coat Gloss 5L","description":"\u003cp\u003eThe \u003cstrong\u003eComponent A Topsealer® WT One Coat gloss 5 L\u003c\/strong\u003e is a water-based acrylic dispersion designed as the base of a two-component protective system that provides a \u003cstrong\u003ehigh-impact visual gloss finish\u003c\/strong\u003e. Suitable for use on microcement, decorative concrete, wood, and continuous coatings, this product offers chemical, wear, and weather resistance, maintaining a bright and elegant surface. It is part of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer\"\u003eTopsealer®\u003c\/a\u003e system, ideal for durable sealing in indoor and outdoor projects.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGlossy finish enhances the color of the coating.\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to water, chemicals, and abrasion.\u003c\/li\u003e\n\u003cli\u003eWater-based formulation with no aggressive odors or risk of yellowing.\u003c\/li\u003e\n\u003cli\u003eImproves surface hardness and protects against foot traffic.\u003c\/li\u003e\n\u003cli\u003eEasy application with roller, brush, or spray gun.\u003c\/li\u003e\n\u003cli\u003eFast drying suitable for projects with tight deadlines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake Component A container before mixing.\u003c\/li\u003e\n\u003cli\u003eMix in a ratio of 5 parts by weight of Component A with 1 part of \u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003eComponent B WT One Coat\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eStir gently to avoid bubbles or variations in the finish.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats with a velour or microfiber roller, allowing 14 to 24 hours drying time between coats.\u003c\/li\u003e\n\u003cli\u003eMaintain optimal environmental conditions (temperature of 10–30 °C and good ventilation).\u003c\/li\u003e\n\u003cli\u003eAvoid application in conditions of high humidity or temperatures below 10 °C.\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e0.15 L\/m²\u003c\/strong\u003e in two coats, depending on porosity and type of substrate.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature\u003c\/strong\u003e: water-based acrylic dispersion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: high gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids content\u003c\/strong\u003e: 22–23 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 130–150 mPa·s (Ford Cup 4)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: approx. 1.02 g\/mL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: between 7 and 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 5 L container (Component A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: requires \u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003eComponent B WT One Coat\u003c\/a\u003e for full curing\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore the original container tightly closed in a dry, ventilated place, avoiding direct light. Ideal temperature between 10 °C and 30 °C. Shelf life of up to 12 months from production if stored correctly.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781655994749,"sku":"TT02030","price":191.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTOneCoat-2021-A-Brillo.jpg?v=1773748254"},{"product_id":"componente-a-topsealer-r-wt-one-coat-satinado-5l-1","title":"Component A Topsealer® WT One Coat satin 5L","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® WT One Coat satin 5 L Component A\u003c\/strong\u003e is a water-based acrylic dispersion that forms part of the two-component final protection system for microcement, concrete, and other continuous surfaces. This product has been developed to offer a highly durable satin finish with high chemical and mechanical resistance, ideal for indoor and outdoor spaces. In combination with its Component B, it is part of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer\"\u003eTopsealer®\u003c\/a\u003e range, guaranteeing durable and aesthetic protection for decorative pavements and coatings.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eElegant and uniform satin finish.\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to water, household chemicals, and scratching.\u003c\/li\u003e\n\u003cli\u003eWater-based product, with no strong odor or yellowing.\u003c\/li\u003e\n\u003cli\u003eImproves surface hardness and resistance to traffic.\u003c\/li\u003e\n\u003cli\u003eQuick drying and easy application with roller, brush, or spray gun.\u003c\/li\u003e\n\u003cli\u003eIdeal for sealing microcement and other decorative coatings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake the contents of the container well before mixing.\u003c\/li\u003e\n\u003cli\u003eMix 5 parts by weight of Component A with 1 part of Component B WT One Coat.\u003c\/li\u003e\n\u003cli\u003eStir gently until a homogeneous mixture is obtained.\u003c\/li\u003e\n\u003cli\u003eApply in two thin coats with a microfiber or velour roller, allowing to dry between coats.\u003c\/li\u003e\n\u003cli\u003eEnsure good ventilation and environmental conditions between 10 °C and 30 °C during application and drying.\u003c\/li\u003e\n\u003cli\u003eDo not apply at temperatures below 10 °C or in environments with high humidity.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately 0.15 L\/m² in two coats on a smooth surface. Performance may vary depending on the porosity of the substrate.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature\u003c\/strong\u003e: water-based acrylic dispersion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid content\u003c\/strong\u003e: 22–23 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 130–150 mPa·s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: ~1.02 g\/mL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: between 7 and 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 5-liter container\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined use\u003c\/strong\u003e: requires \u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003eComponent B WT One Coat\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a dry, cool place, protected from direct light. Keep the container tightly closed. Recommended temperature between 10 °C and 30 °C. Shelf life: up to 12 months from the manufacturing date.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781656093053,"sku":"TT02031","price":191.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTOneCoat-2021-A-Satinado.jpg?v=1773748251"},{"product_id":"componente-a-topsealer-r-wt-one-coat-mate-5l","title":"Component A Topsealer® WT One Coat Matte 5L","description":"\u003cp\u003eThe \u003cstrong\u003eComponent A Topsealer® WT One Coat matte 5 L\u003c\/strong\u003e is a water-based acrylic dispersion designed to achieve a discreet and elegant matte finish on continuous coatings such as microcement, decorative concrete, wood, or natural stone. It belongs to the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer\"\u003eTopsealer®\u003c\/a\u003e range and, combined with its corresponding hardener, offers durable protection against wear, chemicals, and yellowing, standing out for its low reflectance and high resistance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMatte finish that reduces shine for a modern and sober style. \u003c\/li\u003e\n\u003cli\u003eExcellent protection against water, wear, and household cleaning. \u003c\/li\u003e\n\u003cli\u003eWater-based formulation, without aggressive odors or yellowing risks. \u003c\/li\u003e\n\u003cli\u003eIncreases surface hardness suitable for pedestrian traffic. \u003c\/li\u003e\n\u003cli\u003eEasy application by microfiber roller, brush, or spray gun. \u003c\/li\u003e\n\u003cli\u003eFast drying, suitable for projects with tight deadlines. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake Component A container well before use. \u003c\/li\u003e\n\u003cli\u003eMix in a ratio of 5 kg (A) with 1 kg of \u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003eComponent B WT One Coat. \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGently homogenize, avoiding bubble formation. \u003c\/li\u003e\n\u003cli\u003eApply two thin coats using a roller, brush, or spray gun, ensuring uniform thickness. \u003c\/li\u003e\n\u003cli\u003eMaintain temperatures between 10 °C and 30 °C and good ventilation during application and drying. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e0.15 L\/m²\u003c\/strong\u003e in two coats, depending on the type and porosity of the substrate. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature\u003c\/strong\u003e: water-based acrylic dispersion \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: matte \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid content\u003c\/strong\u003e: 22–23 % \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 130–150 mPa·s (Ford Cup 4) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: approximately 1.02 g\/mL \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: between 7 and 8 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 5 L container (Component A) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: requires\u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003e Component B WT One Coat \u003c\/a\u003efor optimal curing \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in its original container, tightly closed, in a dry and well-ventilated place, without exposure to direct sunlight. Keep at a temperature range of 10 °C to 30 °C. Shelf life of up to 12 months from the date of manufacture.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781656191357,"sku":"TT02032","price":191.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTOneCoat-2021-A-Mate.jpg?v=1773748249"},{"product_id":"componente-a-topsealer-r-wt-natural-effect-5kg","title":"Component A Topsealer® WT Natural Effect 5L","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® WT Natural Effect Component A 5 kg (4.090 L)\u003c\/strong\u003e is an acrylic dispersion in water specially formulated to provide a \u003cstrong\u003eNatural Effect\u003c\/strong\u003e finish with a subtle satin sheen, enhancing the tone and natural character of coatings such as microcement, concrete or stone. It belongs to the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer\"\u003eTopsealer®\u003c\/a\u003e range, which protects continuous surfaces, offering resistance, aesthetics and durability both indoors and outdoors.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNatural Effect finish with enhanced tones and soft touch.\u003c\/li\u003e\n\u003cli\u003eWater-based, without aggressive odors or yellowing.\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to water, household products and abrasion.\u003c\/li\u003e\n\u003cli\u003eProvides greater surface hardness and protection to microcement and concrete.\u003c\/li\u003e\n\u003cli\u003eCompatible with roller, brush or spray gun for comfortable application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake the container well before use.\u003c\/li\u003e\n\u003cli\u003eMix 5 kg of Component A with 0.5 kg of \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Componente+B+WT\"\u003eComponent B WT\u003c\/a\u003e (10:1 ratio).\u003c\/li\u003e\n\u003cli\u003eHomogenize the mixture with gentle and constant movements.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats with a microfiber roller or spray gun, leaving an interval of 14 to 24 hours between coats.\u003c\/li\u003e\n\u003cli\u003eWork in temperatures between 10 °C and 30 °C with good ventilation.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e0.15 L\/m²\u003c\/strong\u003e in two coats, adjustable according to the texture and absorption of the substrate.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: water-based acrylic dispersion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Natural Effect\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid content\u003c\/strong\u003e: 22–23 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: ~1.02 g\/mL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: between 7 and 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 5 kg container (approx. 4.090 L)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in its original container, tightly closed, in a dry, ventilated place away from direct sunlight. Recommended temperature between 10 °C and 30 °C. Shelf life of up to 12 months from its manufacturing date.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781656289661,"sku":"TT02037","price":152.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-WT-Natural-Effect-A-5L.png?v=1773752402"},{"product_id":"componente-b-topsealer-r-wt-0-5kg","title":"Component B Topsealer® WT 0.5kg","description":"\u003cp\u003e\u003cstrong\u003eComponent B Topsealer® WT 0.5 kg (0.439 L)\u003c\/strong\u003e is the water-based polyisocyanate hardener designed to complete the two-component \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer%C2%AE+WT\"\u003eTopsealer® WT\u003c\/a\u003e\u003c\/strong\u003e system, offering a final protective layer over coatings such as microcement, decorative concrete, or natural stone. It provides a resistant, durable, and aesthetically appealing film, ideal for projects requiring high protection combined with a finish that preserves natural color and shine.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWater-based hardener for WT varnish.\u003c\/li\u003e\n\u003cli\u003eProvides rigidity, wear resistance, and protection against chemical agents.\u003c\/li\u003e\n\u003cli\u003eCompatible with gloss, satin, or matte finishes when combined with the various Component A.\u003c\/li\u003e\n\u003cli\u003eDoes not yellow over time.\u003c\/li\u003e\n\u003cli\u003eAllows for breathable surfaces and is free of strong odors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake Component A before adding hardener B.\u003c\/li\u003e\n\u003cli\u003eMix in a ratio of 5 kg of Component A to 0.5 kg of Component B (10:1 ratio), or equivalent by volume (5 L A + 0.439 L B).\u003c\/li\u003e\n\u003cli\u003eStir carefully until the mixture is homogeneous, avoiding air entrapment.\u003c\/li\u003e\n\u003cli\u003eApply in two thin coats with a microfiber or velour roller or with a spray gun, allowing 14 to 24 hours to dry between coats.\u003c\/li\u003e\n\u003cli\u003eMaintain a temperature of 10–30 °C and good ventilation during application and drying.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximate yield: 0.15 L\/m² in two coats; may vary depending on the porosity and texture of the substrate.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent\u003c\/strong\u003e: B of WT system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio\u003c\/strong\u003e: 10 parts A \/ 1 part B (weight or volume)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature\u003c\/strong\u003e: aqueous polyisocyanate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 0.5 kg (0.439 L) container\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: essential for the complete curing of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer%C2%AE+WT\"\u003eTopsealer® WT \u003c\/a\u003e system\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore the original container tightly closed in a dry and ventilated place, avoiding direct light. Ideal temperature between 10 °C and 30 °C. Shelf life of up to 12 months from production if stored correctly.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781656519037,"sku":"TT02038","price":59.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/topciment-noimage.jpg?v=1777537750"},{"product_id":"componente-a-topsealer-r-wt-one-coat-brillo-1l","title":"Component A Topsealer® WT One Coat gloss 1L","description":"\u003cp\u003eThe \u003cstrong\u003eComponent A Topsealer® WT One Coat gloss 1 L\u003c\/strong\u003e is a water-based acrylic dispersion designed to achieve a \u003cstrong\u003ehigh gloss\u003c\/strong\u003e finish on continuous decorative coatings such as microcement, concrete, wood, or natural stone. It is part of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer\"\u003eTopsealer®\u003c\/a\u003e range and, when combined with its B hardener, creates a durable, wear-resistant protective film suitable for indoor and outdoor environments.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGlossy finish that enhances the colors and textures of the coating.\u003c\/li\u003e\n\u003cli\u003eHigh resistance to water, household chemicals, and pedestrian traffic.\u003c\/li\u003e\n\u003cli\u003eWater-based formulation with no aggressive odors or risk of yellowing.\u003c\/li\u003e\n\u003cli\u003eProvides greater surface hardness and durability to the substrate.\u003c\/li\u003e\n\u003cli\u003eEasy application with a microfiber roller, brush, or spray gun.\u003c\/li\u003e\n\u003cli\u003eFast drying, ideal for projects with short deadlines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake the container well before mixing.\u003c\/li\u003e\n\u003cli\u003eMix 1 L of component A with 0.2 L of \u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003ecomponent B WT One Coat\u003c\/a\u003e (A:B ratio = 5:1).\u003c\/li\u003e\n\u003cli\u003eMix gently until a homogeneous emulsion without bubbles is obtained.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats with a velour or microfiber roller, allowing 14 to 24 hours drying time between coats.\u003c\/li\u003e\n\u003cli\u003eMaintain application temperatures between 10 °C and 30 °C, ensuring good ventilation.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEstimated efficiency in two coats: approximately \u003cstrong\u003e0.15 L\/m²\u003c\/strong\u003e, variable depending on the texture and absorption of the substrate.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature\u003c\/strong\u003e: acrylic dispersion in water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: high gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids content\u003c\/strong\u003e: 22–23 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 130–150 mPa·s (Ford Cup 4)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: approximately 1.02 g\/mL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: between 7 and 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 1 L container (component A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: requires \u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003eComponent B WT One Coat\u003c\/a\u003e for complete polymerization\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in its closed container, in a dry, ventilated place protected from light. Recommended temperature between 10 °C and 30 °C. Shelf life of up to \u003cstrong\u003e12 months\u003c\/strong\u003e from the manufacturing date.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781656617341,"sku":"TT02040","price":47.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-One-Coat-1L-Brillo.jpg?v=1773752399"},{"product_id":"componente-a-topsealer-r-wt-one-coat-satinado-1l","title":"Component A Topsealer® WT One Coat satin 1L","description":"\u003cp\u003eThe \u003cstrong\u003eTopsealer® WT One Coat Satin Component A 1 L\u003c\/strong\u003e is a water-based acrylic dispersion that forms part of a two-component protective system for continuous coatings such as microcement, concrete, wood or natural stone. Its satin finish provides a soft and elegant sheen, standing out for its resistance to wear, chemical products, and moisture. It is part of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer\"\u003eTopsealer®\u003c\/a\u003e range, designed to preserve the true color and texture of the decorative coating with maximum durability.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSatin finish that aesthetically enhances the surface. \u003c\/li\u003e\n\u003cli\u003eHigh resistance to water, scratching, and household cleaning agents. \u003c\/li\u003e\n\u003cli\u003eWater-based, without strong odors or risk of yellowing over time. \u003c\/li\u003e\n\u003cli\u003eIncreases surface hardness, suitable for foot traffic. \u003c\/li\u003e\n\u003cli\u003eEasy application with a microfiber roller, brush, or spray gun. \u003c\/li\u003e\n\u003cli\u003eEfficient drying, suitable for projects with short deadlines. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake the container before use. \u003c\/li\u003e\n\u003cli\u003eMix 1 L of component A with 0.2 L of \u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003ecomponent B WT One Coat\u003c\/a\u003e (5:1 ratio by weight or volume). \u003c\/li\u003e\n\u003cli\u003eStir gently to avoid bubbles. \u003c\/li\u003e\n\u003cli\u003eApply two thin coats with a velour or microfiber roller, allowing 14 to 24 hours of drying time between coats. \u003c\/li\u003e\n\u003cli\u003eMaintain environmental conditions between 10-30 °C with good ventilation; avoid high humidity. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e0.15 L\/m²\u003c\/strong\u003e in two coats, subject to the porosity and texture of the substrate. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature\u003c\/strong\u003e: water-based acrylic dispersion \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: soft satin \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid content\u003c\/strong\u003e: 22–23 % \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 130–150 mPa·s (Ford 4) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: approx. 1.02 g\/mL \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 7–8 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 1 L container, requires \u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003ecomponent B WT One Coat\u003c\/a\u003e for curing \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in its original container, tightly closed, in a dry, ventilated place, protected from light. Recommended temperature of 10 to 30 °C. Shelf life of up to 12 months from manufacturing under suitable conditions.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781656682877,"sku":"TT02041","price":47.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-One-Coat-1L-Satin.jpg?v=1773752397"},{"product_id":"componente-a-topsealer-r-wt-one-coat-mate-1l","title":"Component A Topsealer® WT One Coat Matte 1L","description":"\u003cp\u003eThe \u003cstrong\u003eComponent A Topsealer® WT One Coat matte 1 L\u003c\/strong\u003e is a water-based acrylic dispersion specially formulated to provide a \u003cstrong\u003ediscreet and elegant matte\u003c\/strong\u003e finish on continuous coatings such as microcement, concrete, wood, or stone. This product is part of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer\"\u003eTopsealer®\u003c\/a\u003e range and, when combined with its corresponding hardener, creates a protective film resistant to wear, cleaning products, and yellowing, without altering the natural tone of the coating.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMatte finish that softens reflections for a modern and understated style. \u003c\/li\u003e\n\u003cli\u003eHigh protection against water, scratching, and household agents. \u003c\/li\u003e\n\u003cli\u003eWater-based formulation with no strong odors or risk of yellowing. \u003c\/li\u003e\n\u003cli\u003eIncreases the surface hardness of the substrate, suitable for pedestrian traffic. \u003c\/li\u003e\n\u003cli\u003eEasy application with a microfiber roller, brush, or spray gun. \u003c\/li\u003e\n\u003cli\u003eFast drying, ideal for projects with tight schedules. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake the container well before use. \u003c\/li\u003e\n\u003cli\u003eMix in a ratio of 1 L of Component A with 0.2 L of \u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003eComponent B WT One Coat\u003c\/a\u003e (5:1 ratio by weight or volume). \u003c\/li\u003e\n\u003cli\u003eStir gently, avoiding the formation of bubbles. \u003c\/li\u003e\n\u003cli\u003eApply two thin coats with a velour or microfiber roller, allowing 14 to 24 hours drying time between coats. \u003c\/li\u003e\n\u003cli\u003eMaintain environmental conditions between 10 °C and 30 °C and good ventilation; avoid high humidity during application and drying. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e0.15 L\/m²\u003c\/strong\u003e in two coats; may vary depending on the porosity and texture of the substrate. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature\u003c\/strong\u003e: Water-based acrylic dispersion \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Matte, non-reflective \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid content\u003c\/strong\u003e: 22–23 % \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 130–150 mPa·s (Ford Cup 4) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: Approximately 1.02 g\/mL \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: Between 7 and 8 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 1 L container (Component A), requires \u003ca href=\"https:\/\/www.topciment.shop\/p\/componente-b-topsealer-r-wt-one-coat-1l\"\u003eComponent B WT One Coat\u003c\/a\u003e for curing \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in the original sealed container, in a dry, ventilated place, protected from direct light. Recommended temperature from 10 °C to 30 °C. Shelf life of up to \u003cstrong\u003e12 months\u003c\/strong\u003e from manufacturing under proper conditions.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781656781181,"sku":"TT02042","price":47.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-One-Coat-1L-Mate.jpg?v=1773752394"},{"product_id":"componente-b-topsealer-r-wt-one-coat-0-2l","title":"Topsealer® WT One Coat Component B 0.2L","description":"\u003cp\u003e\u003cstrong\u003eComponent B Topsealer® WT One Coat 0.2 L\u003c\/strong\u003e is a water-based polyisocyanate hardener essential for completing the \u003cstrong\u003eOne Coat\u003c\/strong\u003e two-component protection system. Designed for use with Component A, it develops an effective protective film against wear, stains, and yellowing, maintaining the natural aesthetic of continuous surfaces such as microcement, concrete, wood, or decorative stone.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWater-based hardener specifically for the One Coat system.\u003c\/li\u003e\n\u003cli\u003eProvides chemical, mechanical, and water protection.\u003c\/li\u003e\n\u003cli\u003eCompatible with gloss, satin, and matte finishes when combined with the appropriate Component A.\u003c\/li\u003e\n\u003cli\u003eDoes not yellow over time and preserves the breathability of the base.\u003c\/li\u003e\n\u003cli\u003eIdeal for interior or exterior floors and walls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake Component A before use.\u003c\/li\u003e\n\u003cli\u003eMix 1 L of \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Componente+A+WT+One+Coat\"\u003eComponent A\u003c\/a\u003e with 0.2 L of Component B (5:1 ratio by weight or volume).\u003c\/li\u003e\n\u003cli\u003eStir gently until a uniform, bubble-free mixture is obtained.\u003c\/li\u003e\n\u003cli\u003eApply in two thin coats using a microfiber or velour roller or spray gun.\u003c\/li\u003e\n\u003cli\u003eWait 14–24 h between coats.\u003c\/li\u003e\n\u003cli\u003eWork in controlled environments between 10 °C and 30 °C, with adequate ventilation.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSuggested application in two coats: approximately \u003cstrong\u003e0.15 L\/m²\u003c\/strong\u003e, depending on the texture and absorption of the substrate.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: water-based polyisocyanate hardener\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio\u003c\/strong\u003e: 5 parts Component A \/ 1 part B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 0.2 L Component B container\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: requires \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Componente+A+WT+One+Coat\"\u003eComponent A from the WT One Coat range\u003c\/a\u003e for full activation\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eKeep the container closed in a dry, ventilated place, protected from direct light. Maintain a temperature range between 10 °C and 30 °C. Shelf life: up to \u003cstrong\u003e12 months\u003c\/strong\u003e from the manufacturing date when stored correctly.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781656879485,"sku":"TT02043","price":20.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWT_B_500mL.jpg?v=1777537654"},{"product_id":"componente-a-topsealer-r-wt-spray-brillo-3l","title":"Component A Topsealer® WT Spray gloss 3L","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® WT Spray Gloss (Component A 3 L)\u003c\/strong\u003e is a two-component water-based polyurethane varnish, specially formulated for spray application on microcement and stamped concrete. It offers a glossy finish that enhances colors, provides extreme hardness and advanced chemical resistance, and does not yellow upon exposure to sunlight. Ideal for protecting decorative coatings in indoor and outdoor areas with high aesthetic and functional requirements.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eExclusive spray application using a professional spray gun system, which guarantees uniformity and a perfect finish.\u003c\/li\u003e\n\n\u003cli\u003eHigh resistance to abrasion, scratches, and household chemical agents such as bleach or vinegar.\u003c\/li\u003e\n\n\u003cli\u003eHigh hardness, ensuring robust protection without losing water vapor permeability.\u003c\/li\u003e\n\n\u003cli\u003eDoes not yellow over time under sunlight.\u003c\/li\u003e\n\n\u003cli\u003eTransparent and glossy, it enhances the texture and color of the surface without altering them.\u003c\/li\u003e\n\n\u003cli\u003ePresentation of \u003cstrong\u003e3 L of Component A\u003c\/strong\u003e, suitable for medium-sized projects or specific areas.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003col\u003e\n\n\u003cli\u003eHomogenize Component A by stirring and let it rest for 30 minutes before use.\u003c\/li\u003e\n\n\u003cli\u003eMix in a proportion of \u003cstrong\u003e3 L of Component A to 1 L of Component B\u003c\/strong\u003e using mechanical stirring at low speed.\u003c\/li\u003e\n\n\u003cli\u003ePrepare the substrate: it must be clean, dry, and free of dust or grease; in case of repainting, remove deteriorated paint by sanding or stripping.\u003c\/li\u003e\n\n\u003cli\u003eApply \u003cstrong\u003eone coat with a spray gun\u003c\/strong\u003e, maintaining a constant distance; allow at least 24 hours of drying before use.\u003c\/li\u003e\n\n\u003cli\u003eIf two coats are applied, leave at least \u003cstrong\u003e12 hours between them\u003c\/strong\u003e.\u003c\/li\u003e\n\n\u003cli\u003eMaintain an ambient temperature between \u003cstrong\u003e15 °C and 30 °C\u003c\/strong\u003e during application; do not apply under adverse temperature or humidity conditions.\u003c\/li\u003e\n\n\u003cli\u003eAllow at least \u003cstrong\u003e7 days for full curing\u003c\/strong\u003e to reach all its mechanical and chemical properties.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eYield\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eA single coat yields approximately \u003cstrong\u003e140 g\/m²\u003c\/strong\u003e (±10 g).\u003c\/li\u003e\n\n\u003cli\u003eFor a standard two-coat finish, estimated yield of \u003cstrong\u003e0.28 L\/m²\u003c\/strong\u003e.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePresentation\u003c\/strong\u003e: 3 L Component A (to be mixed with 1 L of Component B).\u003c\/li\u003e\n\n\u003cli\u003eTotal solids (A+B): \u003cstrong\u003e49 ± 2 %\u003c\/strong\u003e.\u003c\/li\u003e\n\n\u003cli\u003eShore D hardness after 14 days of curing: \u003cstrong\u003eapprox. 75 ± 5\u003c\/strong\u003e.\u003c\/li\u003e\n\n\u003cli\u003eDry film: transparent and glossy, with no residual coloration.\u003c\/li\u003e\n\n\u003cli\u003ePot life of the mixture: \u003cstrong\u003e60 min at 23 °C\u003c\/strong\u003e.\u003c\/li\u003e\n\n\u003cli\u003eNon-flammable packaging, water-based with hydroxylated polyester.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eStorage conditions\u003c\/h3\u003e\n\u003cp\u003eStore in its original sealed container, in a dry and ventilated place, protected from direct sunlight and heat sources. Ideal storage temperature between \u003cstrong\u003e10 °C and 30 °C\u003c\/strong\u003e. Guaranteed shelf life of \u003cstrong\u003e12 months\u003c\/strong\u003e under proper conditions.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657010557,"sku":"TT02053","price":102.69,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/topsealer-barniz-pistola_91_1_93.png?v=1773752392"},{"product_id":"topsealer-r-all-in-one-satinado-2l","title":"Topsealer® All in One Satin 2L","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® All in One\u003c\/strong\u003e satin is a \u003cstrong\u003esingle-component\u003c\/strong\u003e, water-based varnish specially designed to protect \u003cstrong\u003emicrocement\u003c\/strong\u003e surfaces, especially those with low traffic such as furniture, countertops, sinks or decorative elements. Thanks to its formulation, this sealer forms a resistant film with a \u003cstrong\u003esatin\u003c\/strong\u003e finish, which provides a subtle shine and enhances the color of the substrate without altering its texture.\u003c\/p\u003e\u003cp\u003eIt is the most practical and easy-to-apply sealer in the \u003cstrong\u003eTopsealer®\u003c\/strong\u003e range, as it does not require prior mixing with a component B. Its use is recommended for interior decorative projects that use systems such as \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Efectto+Quartz\"\u003eEfectto Quartz\u003c\/a\u003e or \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Sttandard\"\u003eSttandard Microfino\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component\u003c\/strong\u003e: Ready to use, no prior mixing required. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatin finish\u003c\/strong\u003e: Provides a soft and elegant shine. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood surface resistance\u003c\/strong\u003e: To abrasion and moderate wear. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy maintenance\u003c\/strong\u003e: Facilitates subsequent cleaning of the surface. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast drying\u003c\/strong\u003e: Optimizes application times. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor application\u003c\/strong\u003e: Ideal for dry rooms or decorative elements. \u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eEnsure that the surface is clean, dry, free of dust, grease or moisture. \u003c\/li\u003e\n\u003cli\u003eThe microcement base must be completely cured before sealing. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct application\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eShake the container before use to homogenize the content. \u003c\/li\u003e\n\u003cli\u003eApply with a microfiber roller, brush or spray gun in thin and uniform layers. \u003c\/li\u003e\n\u003cli\u003eIt is recommended to apply between 2 and 3 coats, respecting a drying time between coats of 2 to 4 hours (depending on temperature and humidity). \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying and curing\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eAvoid contact with water during the first 24 hours. \u003c\/li\u003e\n\u003cli\u003eComplete curing is achieved after 7 days, after which the final mechanical and chemical properties are obtained. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e0.10 – 0.12 L\/m² per coat\u003c\/strong\u003e, depending on the type of substrate and absorption. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 2 L \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Satin \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity (20 ºC)\u003c\/strong\u003e: 1.03 ± 0.01 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity (Ford Cup 4)\u003c\/strong\u003e: 30–50 s \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8–9 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry time\u003c\/strong\u003e: 20 – 30 min \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids content\u003c\/strong\u003e: 27 ± 2 % \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature\u003c\/strong\u003e: Between 10 ºC and 30 ºC \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry and ventilated place. \u003c\/li\u003e\n\u003cli\u003eRecommended temperature between 10 ºC and 30 ºC. \u003c\/li\u003e\n\u003cli\u003eShelf life of up to \u003cstrong\u003e1 year\u003c\/strong\u003e in original unopened container.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657076093,"sku":"TT02056","price":79.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWT_AllinOne_2L_Satinado.jpg?v=1776945748"},{"product_id":"topsealer-r-all-in-one-satinado-5l-1","title":"Topsealer® All in One Satin 5L","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® All in One satin\u003c\/strong\u003e is a \u003cstrong\u003eone-component water-based polyurethane varnish\u003c\/strong\u003e designed to provide long-lasting protection to surfaces coated with decorative microcement. Its satin finish offers an elegant aesthetic with a subtle sheen, ideal for modern interior and exterior environments.\u003c\/p\u003e\u003cp\u003eThis \u003cstrong\u003emicrocement sealer\u003c\/strong\u003e is specially formulated for use with systems such as \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Efectto+Quartz\"\u003eEfectto Quartz\u003c\/a\u003e, \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Sttandard+Microdeck\"\u003eSttandard Microdeck\u003c\/a\u003e and \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Evoluttion+Microfino\"\u003eEvoluttion Microfino\u003c\/a\u003e, improving the mechanical and chemical resistance of the coating.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh decorative value satin finish\u003c\/strong\u003e: Combines resistance with a bright aesthetic, without excesses. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh durability\u003c\/strong\u003e: Excellent resistance to abrasion, scratching, and pedestrian traffic. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical protection\u003c\/strong\u003e: Withstands common cleaning products and stains. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect and easy application\u003c\/strong\u003e: One-component product, no prior mixing required. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with multiple surfaces\u003c\/strong\u003e: Ideal for protecting microcement floors and walls in bathrooms, kitchens, commercial premises, and covered outdoor areas. \u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eThe substrate must be dry, clean, and free of grease or dust. \u003c\/li\u003e\n\u003cli\u003eFor porous surfaces, it is recommended to use a primer such as \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Primacem+Plus\"\u003ePrimacem Plus\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVarnish application\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eShake the container before use. \u003c\/li\u003e\n\u003cli\u003eApply 2-3 thin coats with a 4mm microfiber roller or brush. \u003c\/li\u003e\n\u003cli\u003eAllow at least 4 hours drying time between coats (depending on environmental conditions). \u003c\/li\u003e\n\u003cli\u003eAvoid use at temperatures below 10 °C or above 30 °C. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull curing\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eThe varnish reaches its maximum resistance after 7 days. \u003c\/li\u003e\n\u003cli\u003eAvoid contact with water or aggressive products during this period. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e0.12 L\/m² per coat\u003c\/strong\u003e, depending on the absorption of the treated surface. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 5 L \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Satin \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.03 ± 0.01 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8–9 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 20–25 s (Ford Cup 4) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry\u003c\/strong\u003e: 30–60 minutes \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance\u003c\/strong\u003e: White liquid that becomes transparent upon drying \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition\u003c\/strong\u003e: Water-based aliphatic polyurethane \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore between 10 °C and 30 °C, in a cool, dry place. \u003c\/li\u003e\n\u003cli\u003eShelf life up to 12 months in its original unopened container.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657174397,"sku":"TT02057","price":196.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTALLinOnet_2021_5d3ac95f-9d8e-4793-8f6c-389dbbf95b8c.jpg?v=1777537446"},{"product_id":"topsealer-r-all-in-one-mate-2l","title":"Topsealer® All in One Matte 2L","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® All in One matte\u003c\/strong\u003e is a \u003cstrong\u003esingle-component\u003c\/strong\u003e water-based polyurethane varnish, designed as a sealing and protective layer for \u003cstrong\u003edecorative microcement\u003c\/strong\u003e coatings, especially those applied with systems such as \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Efectto+Quartz\"\u003eEfectto Quartz\u003c\/a\u003e, \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Sttandard\"\u003eSttandard\u003c\/a\u003e, or \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Evoluttion+Microfino\"\u003eEvoluttion\u003c\/a\u003e. It provides a natural matte finish, high mechanical and chemical resistance, and is suitable for both interior and exterior use.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte finish\u003c\/strong\u003e: Provides a soft and elegant look with low reflectivity. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance\u003c\/strong\u003e: Protects against household cleaning products and stains. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood mechanical resistance\u003c\/strong\u003e: Withstands abrasion, pedestrian traffic, and scratches. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component\u003c\/strong\u003e: Does not require mixing with other components, simplifying application. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for high-decoration microcements\u003c\/strong\u003e: Ideal for protecting finishes with \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Evoluttion+Microdeck\"\u003eEvoluttion Microdeck\u003c\/a\u003e or \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Sttandard+Microfino\"\u003eSttandard Microfino. \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eEnsure the surface is clean, dry, and free of dust and grease. \u003c\/li\u003e\n\u003cli\u003eIf the surface is porous, apply a primer such as \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Primacem+ABS\"\u003ePrimacem ABS\u003c\/a\u003e beforehand. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eShake the container well before use. \u003c\/li\u003e\n\u003cli\u003eApply 2 to 3 coats with a brush, microfiber roller, or spray gun. \u003c\/li\u003e\n\u003cli\u003eAllow a minimum of 4 hours to dry between coats, depending on environmental conditions. \u003c\/li\u003e\n\u003cli\u003eAvoid applying at temperatures below 10 °C or above 30 °C. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull curing\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eAchieved in 7 days. \u003c\/li\u003e\n\u003cli\u003eDo not expose to water or aggressive products during this period. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e0.12 L\/m² per coat\u003c\/strong\u003e, variable depending on the substrate's absorption. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 2 L \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.03 ± 0.01 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8–9 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry\u003c\/strong\u003e: 30–60 minutes \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance\u003c\/strong\u003e: White liquid that becomes transparent upon drying \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase\u003c\/strong\u003e: Water-based aliphatic polyurethane \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Matte \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a cool, dry place, between 10 °C and 30 °C. \u003c\/li\u003e\n\u003cli\u003eShelf life: up to 12 months in unopened original container.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657272701,"sku":"TT02058","price":95.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWT_AllinOne_2L_Mate.jpg?v=1776945762"},{"product_id":"topsealer-r-all-in-one-mate-5l","title":"Topsealer® All in One matte 5L","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® All in One\u003c\/strong\u003e is a single-component, water-based varnish with a matte finish, specifically designed as a sealer and protective layer for microcement-coated surfaces. Thanks to its advanced formulation, this product offers excellent chemical and mechanical resistance without the need for mixing components. It is suitable for both indoor and outdoor use and provides a natural, highly durable finish.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component varnish\u003c\/strong\u003e: Ready to use, no pre-mixing required. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural matte finish\u003c\/strong\u003e: Provides a smooth and uniform appearance. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance\u003c\/strong\u003e: Withstands cleaning products and common household substances. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical resistance\u003c\/strong\u003e: High protection against wear, scratching, and abrasion. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eEnsure the surface is completely dry, clean, and free of dust or grease. \u003c\/li\u003e\n\u003cli\u003eFor very porous surfaces, it is recommended to apply a suitable primer first. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct application\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eShake the product before use. \u003c\/li\u003e\n\u003cli\u003eApply with a roller, brush, or spray gun in thin, even coats. \u003c\/li\u003e\n\u003cli\u003eIt is necessary to apply \u003cstrong\u003e2-3 coats\u003c\/strong\u003e, allowing a minimum of \u003cstrong\u003e4 hours\u003c\/strong\u003e drying time between coats (depending on temperature and humidity). \u003c\/li\u003e\n\u003cli\u003eAvoid applying at temperatures below 10 °C or above 30 °C, and with relative humidity above 80%. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuring\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eFull curing is achieved after 7 days. \u003c\/li\u003e\n\u003cli\u003eAvoid contact with water or chemicals during this period. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e0.12 L\/m² per coat\u003c\/strong\u003e, although this may vary depending on the porosity of the substrate. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 5 L \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance\u003c\/strong\u003e: Milky white liquid (becomes transparent when dry) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.03 ± 0.01 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8–9 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry\u003c\/strong\u003e: 30–60 minutes \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal finish\u003c\/strong\u003e: Matte \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResin type\u003c\/strong\u003e: Water-based aliphatic polyurethane \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry, cool, and well-ventilated place. \u003c\/li\u003e\n\u003cli\u003eRecommended temperature between \u003cstrong\u003e10 °C and 30 °C\u003c\/strong\u003e. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 12 months in original sealed container. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657338237,"sku":"TT02059","price":232.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTALLinOnet_2021.jpg?v=1776945843"},{"product_id":"topsealer-wt-pool-5l","title":"Topsealer WT Pool 5L","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® WT Pool\u003c\/strong\u003e is a two-component water-based varnish, designed to protect surfaces subjected to continuous water immersion. It is the perfect solution for sealing and preserving decorative coatings such as microcement applied in swimming pools, fountains, or ponds. Its formula guarantees long-lasting protection against humidity, water treatment chemicals, and environmental wear and tear.\u003c\/p\u003e\u003cp\u003eCompatible with microcement systems such as \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Atlanttic+Aquaciment%C2%AE\"\u003eAtlanttic Aquaciment®\u003c\/a\u003e, it provides a waterproof and highly resistant layer, also enhancing the aesthetic appeal of the decorative finish.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh water resistance\u003c\/strong\u003e: Suitable for areas in continuous contact with water, without coating degradation. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical protection\u003c\/strong\u003e: Resistant to common pool maintenance products. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransparent finish\u003c\/strong\u003e: Preserves the color and texture of the coating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood adhesion\u003c\/strong\u003e: Excellent performance on microcements and adequately prepared porous substrates. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e1. Substrate preparation\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnsure that the coating (e.g., microcement) is completely dry. In pools, at least \u003cstrong\u003e7 days\u003c\/strong\u003e must pass since the application of the microcement. \u003c\/li\u003e\n\u003cli\u003eRemove dust, grease, or other impurities. Surface must be clean, dry, and free of contaminants. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2. Product mixing\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMix \u003cstrong\u003ecomponent A\u003c\/strong\u003e and \u003cstrong\u003ecomponent B\u003c\/strong\u003e in the exact proportion indicated on the label. \u003c\/li\u003e\n\u003cli\u003eStir at low revolutions for 2-3 minutes to achieve a homogeneous mixture. \u003c\/li\u003e\n\u003cli\u003eLet the mixture rest for \u003cstrong\u003e5 minutes\u003c\/strong\u003e before application. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e3. Application\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApply the product with a roller, brush, or spray gun. \u003c\/li\u003e\n\u003cli\u003eApply \u003cstrong\u003etwo thin\u003c\/strong\u003e, uniform coats. \u003c\/li\u003e\n\u003cli\u003eAllow a \u003cstrong\u003edrying time of 8-12 hours\u003c\/strong\u003e between coats (depending on temperature and humidity). \u003c\/li\u003e\n\u003cli\u003eApply between \u003cstrong\u003e10 °C and 30 °C\u003c\/strong\u003e, with relative humidity \u0026lt;80 %. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e4. Curing\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003eDo not wet or fill the pool until \u003cstrong\u003e7 days\u003c\/strong\u003e after the last application to ensure complete curing. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApprox. \u003cstrong\u003e0.10 - 0.15 L\/m² per coat\u003c\/strong\u003e, depending on the absorption of the substrate. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition\u003c\/strong\u003e: Two-component water-based polyurethane varnish. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.02 ± 0.01 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8–9 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 20–25 s (Ford Cup 4 at 20°C) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Transparent \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry\u003c\/strong\u003e: 30–60 minutes \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater and chemical resistance\u003c\/strong\u003e: High \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a cool, dry, and well-ventilated place. \u003c\/li\u003e\n\u003cli\u003eAvoid extreme temperatures or direct sun exposure. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life: 12 months\u003c\/strong\u003e in unopened container, between 10 °C and 30 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657469309,"sku":"TT02070","price":188.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer_WT_Pool_5L.png?v=1776945699"},{"product_id":"componente-a-topsealer-r-wt-one-coat-supermate-5l-1","title":"Component A Topsealer® WT One Coat Super Matte 5L","description":"\u003cp\u003eThe \u003cstrong\u003eTopsealer® WT One Coat Supermatte 5 L Component A\u003c\/strong\u003e is the water-based acrylic base of the Topsealer® two-component varnish, with a supermatte Premium finish. It is designed to protect microcement, stamped concrete, parquet, wood, or metal surfaces, offering maximum mechanical, chemical-thermal, and visual resistance without yellowing or altering the substrate's tones.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eMain Characteristics\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProfessional supermatte finish performance with a single varnish system.\u003c\/li\u003e\n\u003cli\u003eHigh resistance to wear, scratches, and household agents such as bleach, vinegar, or ammonia.\u003c\/li\u003e\n\u003cli\u003eDoes not yellow with sun exposure; maintains long-term color stability.\u003c\/li\u003e\n\u003cli\u003eOptimized application by spray, brush, or microfiber roller for homogeneous results.\u003c\/li\u003e\n\u003cli\u003eFast-drying acrylic base that allows for a second coat in less than 24 hours.\u003c\/li\u003e\n\u003cli\u003e5 L container of Component A, ideal for medium or large surface projects, combinable with its corresponding B component.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eMixing Proportions with Component B\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMix \u003cstrong\u003e5 parts by weight of Component A to 1 part of Component B\u003c\/strong\u003e, following the official proportion (5 kg + 1 kg) for this presentation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eInstructions for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake Component A and let it rest for 30 minutes before mixing.\u003c\/li\u003e\n\u003cli\u003eCombine in a 5:1 ratio with Component B by mechanical stirring at low speed.\u003c\/li\u003e\n\u003cli\u003eEnsure the substrate is dry, clean, free of dust and grease; if old varnish was present, sand or strip beforehand.\u003c\/li\u003e\n\u003cli\u003eApply two coats using a spray gun, microfiber roller, or brush, allowing \u003cstrong\u003e14 to 24 hours of drying between coats\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eSand the first coat with 400 grit before applying the second; the last coat does not require sanding.\u003c\/li\u003e\n\u003cli\u003eApplication temperature between \u003cstrong\u003e15 °C and 30 °C\u003c\/strong\u003e; avoid adverse humidity or cold conditions.\u003c\/li\u003e\n\u003cli\u003eAllow a \u003cstrong\u003eminimum of 7 days for full curing\u003c\/strong\u003e before exposure to water or traffic.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eYield\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e0.15 L\/m²\u003c\/strong\u003e for two coats with a supermatte finish, equivalent to \u003cstrong\u003e≈ 0.075 L\/m² per coat\u003c\/strong\u003e under normal conditions.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWater-based acrylic with aliphatic diisocyanates (component A).\u003c\/li\u003e\n\u003cli\u003eTotal solids A+B: \u003cstrong\u003e36‑38 %\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eDensity of component A: ~1.02 ± 0.01 g\/mL; of component B: 1.045–1.055 g\/mL.\u003c\/li\u003e\n\u003cli\u003eViscosity A: 20‑30 s (Ford Cup 4 at 25 °C); pH A: 7‑9.\u003c\/li\u003e\n\u003cli\u003ePersoz hardness after 14 days: \u003cstrong\u003e≈ 205 s\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eTaber abrasion (CS17, 1000 g, 1000 cycles): ≤ 80 mg.\u003c\/li\u003e\n\u003cli\u003ePot life of the mixture: \u003cstrong\u003e60 min at 23 °C\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eCompatible with matte, satin, glossy, and supermatte finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eStorage Conditions\u003c\/h3\u003e\u003cp\u003eKeep in its original sealed container, in a dry, ventilated area, protected from direct sunlight or heat. Recommended temperatures between \u003cstrong\u003e10 °C and 30 °C\u003c\/strong\u003e. Product shelf life: \u003cstrong\u003e1 year\u003c\/strong\u003e under optimal conditions.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657534845,"sku":"TT02132","price":204.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTOneCoat-2021-SuperMate.jpg?v=1773752389"},{"product_id":"componente-a-topsealer-r-pro-fast-0-8kg","title":"Component A Topsealer® PRO+ FAST 0.8kg","description":"\u003cp\u003e\u003cstrong\u003eComponent A Topsealer® PRO+ FAST\u003c\/strong\u003e is a high-performance polyaspartic resin that, together with component B, forms a fast-curing 100% solids two-component varnish. Specially formulated for the protection of microcement and decorative concrete, it offers a high-gloss finish with high hardness, impermeability, and resistance to scratches, abrasion, chemical agents, and UV radiation. Its application does not require a primer and is done in a single coat. The system can be completed with satin or matte finishes using products from the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer%C2%AE\"\u003eTopsealer®\u003c\/a\u003e range.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePolyaspartic resin with high sealing power and fast curing. \u003c\/li\u003e\n\u003cli\u003eGlossy finish that enhances the color of the substrate without yellowing. \u003c\/li\u003e\n\u003cli\u003eHigh resistance to water, abrasion, scratching, and chemical agents. \u003c\/li\u003e\n\u003cli\u003eApplied in a single coat, no primer required. \u003c\/li\u003e\n\u003cli\u003eCompatible with microcement and other continuous decorative coatings. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eInstructions for use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eEnsure that the substrate is clean, dry, and free of contaminants. \u003c\/li\u003e\n\u003cli\u003eGently shake component A for 1 minute and let it rest for 15 minutes with the container closed. \u003c\/li\u003e\n\u003cli\u003eMix 100 parts of component A with 80 parts of component B (pre-measured ratio in 0.8 kg + 0.64 kg formats). \u003c\/li\u003e\n\u003cli\u003eStir the mixture with a low-speed mixer until a homogeneous product is obtained. \u003c\/li\u003e\n\u003cli\u003eApply immediately after mixing, using a methacrylate trowel, anti-burn biflex trowel, or 0-pore roller. \u003c\/li\u003e\n\u003cli\u003eAllow to dry for 2 to 3 hours between coats. Full curing is achieved in 7 days at 23 °C and 50% RH. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e60 to 100 g\/m²\u003c\/strong\u003e per coat, depending on the porosity of the substrate.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProduct type: polyaspartic resin (component A). \u003c\/li\u003e\n\u003cli\u003eDensity: 1.07 ± 0.05 g\/cm³. \u003c\/li\u003e\n\u003cli\u003eViscosity: 843 ± 100 mPa·s. \u003c\/li\u003e\n\u003cli\u003ePot life of the mixture: 15 minutes. \u003c\/li\u003e\n\u003cli\u003eDrying time between coats: 2–3 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eFinish: high gloss.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFormat: 0.8 Kg\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eStorage conditions\u003c\/h3\u003e\u003cp\u003eStore between 10 °C and 30 °C, in original sealed container, in a dry place protected from humidity, frost, and high temperatures.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657633149,"sku":"TT02141","price":77.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Pro-A-Fast.jpg?v=1773752387"},{"product_id":"componente-b-topsealer-r-pro-fast-0-64kg","title":"Component B Topsealer® PRO+ FAST 0.64Kg","description":"\u003cp\u003eThe \u003cstrong\u003eComponent B Topsealer® PRO+ FAST\u003c\/strong\u003e is an aliphatic hardener formulated to combine with component A of the two-component 100% solids Topsealer® PRO+ FAST system. This high-quality polyisocyanate enhances the varnish's resistance to water, abrasion, UV rays, and chemical agents, while providing a glossy finish that enhances the color of microcement and decorative concrete. Designed for professionals who demand fast curing and maximum durability in continuous coatings. It can be complemented with additional finishes from the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer%C2%AE\"\u003eTopsealer®\u003c\/a\u003e range, such as matte or satin options.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly reactive aliphatic polyisocyanate, developed to form a high-performance polyurea.\u003c\/li\u003e\n\u003cli\u003eProvides a high-gloss finish, high transparency, and excellent chromatic stability without yellowing.\u003c\/li\u003e\n\u003cli\u003eConfers advanced resistance to chemical agents, scratching, abrasion, and humidity.\u003c\/li\u003e\n\u003cli\u003eAllows direct application to the substrate without the need for a primer.\u003c\/li\u003e\n\u003cli\u003eFast curing with high hardness after 7 days.\u003c\/li\u003e\n\u003cli\u003eCompatible with a single application layer when used with component A.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eInstructions for Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eGently shake component A to homogenize its content without opening the container, and let it rest for 15 minutes.\u003c\/li\u003e\n\u003cli\u003eMix 100 parts of component A with 80 parts of component B. In the standard format, this is equivalent to 0.8 kg of A and 0.64 kg of B.\u003c\/li\u003e\n\u003cli\u003eStir at low speed until a completely homogeneous mixture is obtained.\u003c\/li\u003e\n\u003cli\u003eApply immediately after mixing, as the pot life of the mixture is approximately 15 minutes.\u003c\/li\u003e\n\u003cli\u003eUse a methacrylate trowel, anti-burn biflex trowel, or \"pore 0\" roller to apply a single layer.\u003c\/li\u003e\n\u003cli\u003eAllow to dry for 2 to 3 hours between coats at 23 °C and 50% relative humidity. Full curing is reached in 7 days.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003cp\u003eThe combined consumption of the system (A + B) in a single layer is approximately \u003cstrong\u003e60 to 100 g\/m²\u003c\/strong\u003e, depending on the absorption and texture of the substrate.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProduct type: aliphatic hardener (component B of two-component 100% solids polyurethane system).\u003c\/li\u003e\n\u003cli\u003eChemical base: aliphatic polyisocyanate.\u003c\/li\u003e\n\u003cli\u003eDensity: 1.10 ± 0.05 g\/cm³ at 23 °C.\u003c\/li\u003e\n\u003cli\u003eViscosity: 550 ± 150 mPa·s at 23 °C.\u003c\/li\u003e\n\u003cli\u003ePot life: 15 minutes.\u003c\/li\u003e\n\u003cli\u003eDrying time between coats: 2 to 3 hours (23 °C and 50% RH).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eFinish: high gloss.\u003c\/li\u003e\n\u003cli\u003ePersoz hardness after full curing: 150 seconds.\u003c\/li\u003e\n\u003cli\u003eTaber abrasion resistance (CS17, 1000 g, 1000 cycles): 35 mg.\u003c\/li\u003e\n\u003cli\u003eRecommended application temperature: between 10 °C and 30 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eStorage Conditions\u003c\/h3\u003e\u003cp\u003eStore in its original, tightly closed container, in a dry and ventilated place, at temperatures between 10 °C and 30 °C. Protect from extreme heat and frost. Use before the indicated expiration date.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657731453,"sku":"TT02142","price":61.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Pro__B_Fast.jpg?v=1776945639"},{"product_id":"componente-a-topsealer-r-pro-slow-0-8kg","title":"Component A Topsealer® PRO+ SLOW 0.8Kg","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® PRO+ SLOW\u003c\/strong\u003e Component A is a solvent-based aliphatic polyurethane varnish, part of a two-component system specially designed for the protection of continuous decorative coatings. This \"SLOW\" version is formulated to offer a longer drying time, which improves workability in adverse weather conditions or during applications on large surfaces.\u003c\/p\u003e\u003cp\u003eIt is especially recommended as a protective finish for systems such as \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Evoluttion\"\u003e\u003cstrong\u003eEvoluttion\u003c\/strong\u003e\u003c\/a\u003e, \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Sttandard\"\u003e\u003cstrong\u003eSttandard\u003c\/strong\u003e\u003c\/a\u003e or \u003ca href=\"https:\/\/www.topciment.shop\/search?q=industtrial\"\u003e\u003cstrong\u003eIndusttrial\u003c\/strong\u003e\u003c\/a\u003e, ensuring a durable and resistant seal.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh protective performance\u003c\/strong\u003e: Effectively protects coatings like microcement against wear, chemicals, and stains. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended drying time\u003c\/strong\u003e: Ideal for warm, humid areas or large surfaces. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHighly UV radiation resistant finish\u003c\/strong\u003e: Does not yellow over time. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion on sealed surfaces\u003c\/strong\u003e: Compatible with multiple decorative substrates. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal as a final coat in demanding decorative systems\u003c\/strong\u003e: Combines perfectly with Topciment coatings such as Evoluttion Microdeck or Industtrial Medio. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct preparation\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eMix Component A with Component B (Topsealer® PRO+ SLOW B) in a \u003cstrong\u003e3:1 ratio by weight\u003c\/strong\u003e. \u003c\/li\u003e\n\u003cli\u003eHomogenize with a low-speed mixer for at least 2 minutes. \u003c\/li\u003e\n\u003cli\u003eLet the mixture rest for 2 minutes before applying. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eApply with a 6 mm microfiber roller. \u003c\/li\u003e\n\u003cli\u003eTwo coats are recommended for an optimal finish. \u003c\/li\u003e\n\u003cli\u003eAllow 8 to 12 hours drying time between coats depending on temperature and humidity. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental conditions\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eAmbient temperature: between 15 ºC and 25 ºC. \u003c\/li\u003e\n\u003cli\u003eRelative humidity: below 80 %. \u003c\/li\u003e\n\u003cli\u003eAvoid drafts and direct heat sources during drying. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApprox. \u003cstrong\u003e0.10 – 0.15 L\/m² per coat\u003c\/strong\u003e (combined with Component B). \u003c\/li\u003e\n\u003cli\u003ePerformance may vary depending on the porosity of the substrate and application conditions. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Aliphatic polyurethane varnish. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio (A:B)\u003c\/strong\u003e: 3:1 by weight. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity (A)\u003c\/strong\u003e: 1.015 ± 0.01 g\/cm³. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 110 ± 10 s (Ford Cup 4) at 25 ºC. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life\u003c\/strong\u003e: 60 min at 20 ºC. \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFormat: 0.8 kg\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a cool, dry place, between 5 ºC and 25 ºC. \u003c\/li\u003e\n\u003cli\u003eProtect from direct sunlight and frost. \u003c\/li\u003e\n\u003cli\u003eIn its original, unopened container, it has a \u003cstrong\u003eshelf life of 12 months\u003c\/strong\u003e. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657829757,"sku":"TT02143","price":77.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Pro-A-Slow.jpg?v=1773752385"},{"product_id":"componente-b-topsealer-r-pro-slow-0-64kg","title":"Component B Topsealer® PRO+ SLOW 0.64Kg","description":"\u003cp\u003e\u003cstrong\u003eTopsealer® PRO+ SLOW\u003c\/strong\u003e is the B component of a two-component aliphatic solvent-based polyurethane varnish. Its function is to act as a hardener for the A component of the \u003cstrong\u003eTopsealer® PRO+\u003c\/strong\u003e system, providing greater chemical and mechanical resistance to the final coating. The \u003cstrong\u003eSLOW\u003c\/strong\u003e version has a longer drying time, allowing for more comfortable handling in large surface applications or in demanding weather conditions.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger working time\u003c\/strong\u003e: Its \"SLOW\" version facilitates application in warm climates or on extensive surfaces. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent chemical and mechanical resistance\u003c\/strong\u003e: Improves protection against abrasion, stains and aggressive cleaning products. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAliphatic components\u003c\/strong\u003e: High stability against UV radiation, non-yellowing. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for demanding decorative systems\u003c\/strong\u003e: Compatible with microcement coatings such as\u003ca href=\"https:\/\/www.topciment.shop\/search?q=Sttandard\"\u003e \u003cstrong\u003eSttandard\u003c\/strong\u003e\u003c\/a\u003e or \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Evoluttion\"\u003e\u003cstrong\u003eEvoluttion\u003c\/strong\u003e. \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEasy integration with Component A\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrior preparation\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eMake sure Component A is well stirred before adding Component B. \u003c\/li\u003e\n\u003cli\u003eMix in a \u003cstrong\u003e3:1 (A:B)\u003c\/strong\u003e ratio by weight. \u003c\/li\u003e\n\u003cli\u003eUse a low-speed stirrer for at least 2 minutes until a homogeneous mixture is obtained. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eApply the mixture with a 6 mm microfiber roller. \u003c\/li\u003e\n\u003cli\u003eAllow to dry between coats according to environmental conditions (see below). \u003c\/li\u003e\n\u003cli\u003eIt is recommended to apply two coats of the complete system (A+B). \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal working conditions\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eTemperature: between 15 ºC and 25 ºC. \u003c\/li\u003e\n\u003cli\u003eRelative humidity: less than 80 %. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eDepends on the complete system applied. \u003c\/p\u003e\u003cp\u003eIn general: b\u003cspan\u003eetween \u003c\/span\u003e\u003cstrong\u003e0.10 and 0.15 L\/m² per coat\u003c\/strong\u003e\u003cspan\u003e, together with Component A.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio (A:B)\u003c\/strong\u003e: 3:1 by weight. \u003c\/li\u003e\n\u003cli\u003eFormat: 0.64 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life\u003c\/strong\u003e: 60 minutes at 20 ºC. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry\u003c\/strong\u003e: 4 to 6 hours. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure\u003c\/strong\u003e: 7 days. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Colorless.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in its original container, tightly closed, in a dry and cool place. \u003c\/li\u003e\n\u003cli\u003eRecommended temperature: between 5 ºC and 25 ºC. \u003c\/li\u003e\n\u003cli\u003eProtect from heat sources and direct sunlight. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 12 months from the date of manufacture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781657928061,"sku":"TT02144","price":61.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Pro__B_Slow.jpg?v=1776945657"},{"product_id":"componente-a-topsealer-wt-spray-blanco-5l","title":"Topsealer® WT Spray Component A white 5L","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377048957,"sku":"TT02051","price":179.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer_WT_Dragon_6a9155e1-4ae0-4e6d-9b51-798aa11f5db9.jpg?v=1781691075"},{"product_id":"componente-a-topsealer-wt-one-coat-supermate-1l","title":"Component A Topsealer® WT One Coat super matte 1L","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377081725,"sku":"TT02054","price":42.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer_One_Coat_Supermatt_1x4_37c4cead-6b83-4532-babe-dab6ae70b7b4.jpg?v=1781693817"},{"product_id":"componente-a-topsealer-wt-one-coat-mate-2l","title":"Topsealer® WT One Coat matte component A 2L","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377114493,"sku":"TT02060","price":31.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTDragon.jpg?v=1781693868"},{"product_id":"componente-a-topsealer-wt-anti-slip-5l","title":"Topsealer® WT Anti-Slip Component A 5L","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377180029,"sku":"TT02110","price":232.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTDragon_f93a0be2-1bc1-43ac-be0a-d097ab651721.jpg?v=1781697137"},{"product_id":"componente-a-topsealer-wt-dragon-mate-1l","title":"Topsealer WT Dragon Component A matte 1L","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377212797,"sku":"TT02112","price":47.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTDragon_f42f09f7-16da-4aaf-856e-072d1982a2dc.jpg?v=1781697394"},{"product_id":"componente-a-topsealer-pro-fast-colour-ad-0-8kg","title":"Topsealer® PRO+ FAST Colour Component A 0.8Kg","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377311101,"sku":"TT02145","price":66.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Pro__A_Fast.jpg?v=1781697780"},{"product_id":"componente-b-topsealer-pro-fast-colour-ad-0-64-kg","title":"Topsealer® PRO+ FAST Colour AD Component B 0.64 kg","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377343869,"sku":"TT02146","price":60.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Pro__B_Fast_880cf485-d215-47e3-a997-70ddeb5b7b4e.jpg?v=1781697832"},{"product_id":"componente-a-topsealer-wt-dragon-brillo-1l","title":"Topsealer WT Dragon Component A gloss 1L","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377376637,"sku":"TT02150","price":47.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer_WT_Dragon.jpg?v=1781689009"},{"product_id":"componente-a-topsealer-wt-dragon-satinado-1l","title":"Topsealer WT Dragon Component A satin 1L","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377409405,"sku":"TT02151","price":47.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTDragon_c4442731-3083-4956-95d2-7a5245e2570a.jpg?v=1781697904"},{"product_id":"componente-a-topsealer-wt-dragon-supermate-1l","title":"Topsealer WT Dragon Component A super matte 1L","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377442173,"sku":"TT02153","price":69.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTDragon_501d1ec5-0e38-4176-818f-9dd30ddfd468.jpg?v=1781697992"},{"product_id":"componente-b-topsealer-wt-one-coat-0-3l","title":"Topsealer® WT One Coat Component B 0.3L","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":58277377474941,"sku":"TT02155","price":24.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/TopsealerWTDragon_986c4a8d-802f-4325-aae6-936a1af3c279.jpg?v=1781698074"}],"url":"https:\/\/topciment.shop\/en\/collections\/topsealer.oembed","provider":"topciment.shop","version":"1.0","type":"link"}