{"title":"All products","description":null,"products":[{"product_id":"componente-a-topsealer-wt-dragon-mate-3l","title":"Component A Topsaler WT Dragon Mate 3L","description":"\u003cp\u003eTwo-component water-based polyurethane varnish with a matte finish. Designed to protect microcement surfaces, it offers high resistance to wear and chemical products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTopsealer WT Dragon Matte\u003c\/strong\u003e is a two-component water-based polyurethane varnish specifically developed to protect microcement coatings. This product ensures a resistant protective layer, extending the service life of the finish and enhancing its appearance with a natural matte finish. Ideal for indoor and outdoor floors and walls.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features:\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHigh mechanical resistance:\u003c\/strong\u003e Protects against wear, scratches, and chemical products.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eNatural matte finish:\u003c\/strong\u003e Provides a uniform and elegant appearance.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eEasy application:\u003c\/strong\u003e Compatible with brush, roller, or spray gun.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eVersatility:\u003c\/strong\u003e Suitable for microcement, concrete, wood, and other materials.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDurable protection:\u003c\/strong\u003e Improves impermeability and resistance to foot traffic.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e1. Surface preparation:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eEnsure the surface is dry, clean, and free of dust or grease.\u003c\/li\u003e\n\n\u003cli\u003eApply a coat of \u003cstrong\u003ePresealer\u003c\/strong\u003e if the substrate requires prior sealing.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e2. Mixing the product:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eMix component A (Topsealer WT Dragon Matte) with component B in a 5:1 ratio.\u003c\/li\u003e\n\n\u003cli\u003eStir slowly for 2-3 minutes with a low-speed mixer until a homogeneous mixture is obtained.\u003c\/li\u003e\n\n\u003cli\u003eLet the mixture sit for 5-10 minutes before application.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e3. Application:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\n\u003cli\u003eApply the first coat with a 4 mm microfiber roller or a brush, distributing the product evenly.\u003c\/li\u003e\n\n\u003cli\u003eLet it dry for 8 to 12 hours depending on temperature and humidity.\u003c\/li\u003e\n\n\u003cli\u003eApply a second coat following the same procedure.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003e4. Curing and sealing:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eAvoid contact with water during the first 72 hours after application.\u003c\/li\u003e\n\n\u003cli\u003eFull curing is achieved after 7 days.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSmooth surfaces:\u003c\/strong\u003e 0.10-0.12 L\/m² per coat.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePorous surfaces:\u003c\/strong\u003e Up to 0.15 L\/m² per coat.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.02 ± 0.01 g\/cm³.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTouch-dry time:\u003c\/strong\u003e 30-60 minutes.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eChemical resistance:\u003c\/strong\u003e High.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBase:\u003c\/strong\u003e Water-based polyurethane.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eStore in a cool, dry place, between 10°C and 30°C.\u003c\/li\u003e\n\n\u003cli\u003eShelf life: 12 months in its original, unopened container.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781649998205,"sku":"TT02102","price":161.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-3L-Dragon-Mate_1.avif?v=1780928558"},{"product_id":"componente-a-topsealer-wt-dragon-brillo-3l","title":"Component A Topsealer WT Dragon Gloss 3L","description":"\u003cp\u003eTwo-component water-based polyurethane varnish with a glossy finish. Designed to protect microcement surfaces, it offers high resistance to wear, chemical agents, and scratching without yellowing. Compatible with multiple substrates such as wood, parquet, stamped concrete, or microcement, its formulation with hydroxylated polyester resins and isocyanates allows it to maintain vapor breathability and ensures durability both indoors and outdoors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eComponent A\u003c\/strong\u003e must be mixed with \u003cstrong\u003eComponent B\u003c\/strong\u003e in a 3:1 ratio (by weight) by gently stirring and allowed to rest for 30 minutes before application. Its pot life is 60 minutes at 20 °C. It is applied in two coats (14–24 h between them), with a total coverage of 5‑8 m²\/L (two coats), and dries completely after 7 days, achieving a Persoz hardness of 250 s. Ideal for high-traffic areas, humid areas, and embellishing industrial surfaces with a deep glossy finish.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntense Gloss:\u003c\/strong\u003e Glossy finish that enhances the color and texture of the substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Chemical and Mechanical Resistance:\u003c\/strong\u003e Protects against water, alkalis, bleach, oil, vinegar, wine, and alcohol without visible marks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-yellowing:\u003c\/strong\u003e Maintains transparency even outdoors with sun exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible and Breathable:\u003c\/strong\u003e Applicable on microcement, wood, concrete, and parquet, respecting vapor breathability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Professional Application:\u003c\/strong\u003e Can be applied with a brush, roller, or spray gun; quick and easy mixing, ideal for indoor and outdoor projects.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for Use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShake \u003cstrong\u003eComponent A\u003c\/strong\u003e and let it rest for 30 minutes.\u003c\/li\u003e\n\u003cli\u003eMix with \u003cstrong\u003eComponent B\u003c\/strong\u003e in a 3:1 ratio (by weight), stirring at low speed.\u003c\/li\u003e\n\u003cli\u003eApply two coats, allowing 14‑24 hours drying time between them.\u003c\/li\u003e\n\u003cli\u003eObserve application temperature between 15 °C and 30 °C.\u003c\/li\u003e\n\u003cli\u003eFull cure in 7 days to achieve complete resistance.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5–8 m²\/L\u003c\/strong\u003e in total for two correctly applied coats.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature Comp. A:\u003c\/strong\u003e Water-based polyacrylate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.03 ± 0.01 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity (23 °C):\u003c\/strong\u003e 130–150 mPa·s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids Comp. A:\u003c\/strong\u003e 22–23 %\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH Comp. A:\u003c\/strong\u003e 7–8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life:\u003c\/strong\u003e 60 min at 20 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePersoz Hardness (7 days):\u003c\/strong\u003e 250 s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC (A+B):\u003c\/strong\u003e \u0026lt; 5 g\/L\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a cool, dry place, protected from direct sunlight, between 10 °C and 30 °C. Keep in its original closed container. Shelf life of 12 months from manufacturing.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781650456957,"sku":"TT02100","price":161.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-3L-Dragon-Brillo.jpg?v=1780928397"},{"product_id":"componente-a-topsealer-wt-dragon-satinado-3l","title":"Component A Topsealer WT Dragon Satin 3L","description":"\u003cp\u003eTopsealer WT Dragon is a two-component water-based polyurethane varnish with a satin finish, designed to protect continuous coatings such as microcement, concrete, wood, or parquet. Its formula combines component A (aqueous dispersion) with component B (isocyanate), achieving a highly resistant protective layer against wear, abrasion, and household chemicals. It does not yellow, is suitable for indoor and outdoor use, and improves the durability of finishes, maintaining their appearance over time.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural satin finish\u003c\/strong\u003e, which enhances the texture of the coating without excessive reflections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh resistance to wear\u003c\/strong\u003e, scratching, water, and chemical agents such as vinegar, bleach, wine, or oil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes not yellow\u003c\/strong\u003e, even with exposure to sunlight, so it can be applied outdoors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for multiple substrates\u003c\/strong\u003e: microcement, parquet, natural wood, concrete, etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-based product\u003c\/strong\u003e with low VOC content, safer for the applicator and the environment.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: it must be clean, dry, and free of grease or dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing\u003c\/strong\u003e: combine Component A with Component B in the proportion indicated by the manufacturer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: apply in two thin coats with a roller, brush, or spray gun.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying\u003c\/strong\u003e: allow to dry between coats for the recommended time according to temperature and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull curing\u003c\/strong\u003e: do not expose to direct contact with water or heavy use until the days indicated by the manufacturer have passed.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eBetween \u003cstrong\u003e5 and 8 m²\/L\u003c\/strong\u003e for both coats combined, depending on the type of substrate and application conditions.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type\u003c\/strong\u003e: Two-component water-based polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Indoor and outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible substrates\u003c\/strong\u003e: Microcement, wood, parquet, concrete\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance\u003c\/strong\u003e: Water, scratching, household chemicals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content\u003c\/strong\u003e: Low\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-yellowing\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio\u003c\/strong\u003e: To be specified according to the manufacturer's technical data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore the product in its original closed container, in a dry and ventilated place, protected from sunlight and at a temperature between 10 °C and 30 °C. Shelf life is \u003cstrong\u003e12 months\u003c\/strong\u003e if the container has not been opened.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781650489725,"sku":"TT02101","price":161.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topsealer-3L-Dragon-Satin.jpg?v=1780928501"},{"product_id":"primacem-flex-25l","title":"Primacem Flex 25L","description":"\u003cp\u003ePrimacem® Flex is a ready-to-use styrene-butadiene primer in aqueous dispersion, designed as a bonding bridge between new and old mortars and to improve adhesion in microcement and continuous coating applications. It increases the mechanical properties of the substrate, promotes cohesion, and ensures an effective bond between layers without prior dilution.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eEffective bonding bridge between new and old mortars.\u003c\/li\u003e\n\u003cli\u003eSignificantly improves the adhesion of mortars and continuous coatings.\u003c\/li\u003e\n\u003cli\u003eReady-to-use product, no dilution required.\u003c\/li\u003e\n\u003cli\u003eWater-based, without plasticizers, solvents, or ammonia.\u003c\/li\u003e\n\u003cli\u003eYield of \u003cstrong\u003e10–12 m²\/L\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePrepare the substrate, ensuring it is clean, dry, and free of grease, oils, rust, or loose paint.\u003c\/li\u003e\n\u003cli\u003eShake the product before use.\u003c\/li\u003e\n\u003cli\u003eApply a uniform coat with a brush, roller, or sprayer, avoiding excessively thick coats.\u003c\/li\u003e\n\u003cli\u003eAllow to dry until \"tack\" effect before applying mortar or coating.\u003c\/li\u003e\n\u003cli\u003eApply at temperatures between \u003cstrong\u003e5 °C\u003c\/strong\u003e and \u003cstrong\u003e30 °C\u003c\/strong\u003e, and substrate temperature between \u003cstrong\u003e5 °C\u003c\/strong\u003e and \u003cstrong\u003e25 °C\u003c\/strong\u003e, without excessive wind.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003e10–12 m²\/L\u003c\/strong\u003e on leveled and good condition substrates.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNature: Styrene-butadiene in aqueous dispersion\u003c\/li\u003e\n\u003cli\u003eAppearance: Milky white liquid\u003c\/li\u003e\n\u003cli\u003eNon-volatile solids: 34–35 %\u003c\/li\u003e\n\u003cli\u003eDensity: 1.02 ± 0.05 g\/cm³\u003c\/li\u003e\n\u003cli\u003eApplication temperature: 5–30 °C (substrate up to 25 °C)\u003c\/li\u003e\n\u003cli\u003eDrying: until tack effect without track\u003c\/li\u003e\n\u003cli\u003eTools: brush, roller, or sprayer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in original closed container, in a dry, well-ventilated place, protected from direct light and temperatures between \u003cstrong\u003e10 °C\u003c\/strong\u003e and \u003cstrong\u003e30 °C\u003c\/strong\u003e.\u003cbr\u003e \u003cstrong\u003eShelf life:\u003c\/strong\u003e 12 months.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781650686333,"sku":"TT03066","price":292.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/PrimacemFlex25L.jpg?v=1780928507"},{"product_id":"sttandard-microbase-l-20kg","title":"Sttandard Microbase L 20Kg","description":"\u003cp\u003eSttandard Microbase is a two-component powder microcement (component A) designed as a primer before applying finishing microcements such as \u003ca href=\"https:\/\/www.topciment.shop\/search?q=sttandard+microfino\"\u003eSttandard Microfino\u003c\/a\u003e, \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Microdeck\"\u003eMicrodeck\u003c\/a\u003e or \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Microstone\"\u003eMicrostone\u003c\/a\u003e; it can also be used as a rustic finish. It is applied in thin layers (1-3 mm) with a trowel over a clean, flat surface with prepared expansion joints. After mixing with component B (liquid Acricem resin), it offers excellent adhesion, workability and decorative versatility, being suitable for both indoor and outdoor floors and walls.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eSeamless continuous coating with high adhesion to the substrate.\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple substrates: concrete, mortar, ceramic, plaster, plasterboard, MDF, etc. \u003c\/li\u003e\n\u003cli\u003eHigh workability and variety of finishes: matte, satin and gloss.\u003c\/li\u003e\n\u003cli\u003eAvailable in three particle sizes (L, XL, XXL) for different aesthetic and mechanical effects.\u003c\/li\u003e\n\u003cli\u003eHigh mechanical resistance: flexural strength ≥ 10 N\/mm² and compressive strength ≥ 50 N\/mm² at 28 days.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePrepare the substrate: clean, dry, stable and free of contaminants. Optional reinforcement with Builtex mesh or priming with \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Primacem%C2%AE\"\u003ePrimacem®\u003c\/a\u003e as indicated.\u003c\/li\u003e\n\u003cli\u003eMix component A (powder microcement) with component B (\u003ca href=\"https:\/\/www.topciment.shop\/search?q=Acricem\"\u003eAcricem\u003c\/a\u003e resin) and pigment, following proportions: 10 kg of powder + 2.5–3.0 L of resin.\u003c\/li\u003e\n\u003cli\u003eKnead until homogeneous (min. 4 min). Apply with a trowel in a 1–3 mm layer, \"wet on wet\" technique if texturizing is desired.\u003c\/li\u003e\n\u003cli\u003eSand between layers to remove imperfections. \u003c\/li\u003e\n\u003cli\u003eAfter applying Microbase, proceed with successive layers of Microfino, Microdeck or Microstone according to the required finish. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMicrobase L: 2.00 kg\/m² applying two coats.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eParticle size L: aggregate up to 0.3 mm.\u003c\/li\u003e\n\u003cli\u003eFlexural strength: ≥ 10 N\/mm² after 28 days.\u003c\/li\u003e\n\u003cli\u003eCompressive strength: ≥ 50 N\/mm² at 28 days.\u003c\/li\u003e\n\u003cli\u003eAdhesion to substrate: ≥ 1.5 N\/mm² after 28 days.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a dry place, protected from humidity and extreme temperatures. Keep in original unopened packaging until use. Shelf life is unlimited for powder correctly stored according to Topciment microcement standards.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781650751869,"sku":"TT01001","price":73.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Sttandard-Microbase-Azul-L_91_1_93.jpg?v=1780928531"},{"product_id":"sttandard-microstone-xl-20kg","title":"Sttandard Microstone XL 20Kg","description":"\u003cp\u003eSttandard Microstone XL is a traditional two-component finishing microcement, formulated with hydraulic binders, synthetic resins, specific additives, and selected colorants. Designed for continuous flooring and wall coverings in outdoor areas, it offers a natural stone appearance, uniform color, and high decorative value. Its medium-grain texture provides a non-slip finish without the need for subsequent treatments and excellent abrasion resistance, ideal for terraces, porches, and facades.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous, seamless coating\u003c\/strong\u003e, respecting expansion joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical and abrasion resistance\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-slip finish\u003c\/strong\u003e, ideal for outdoor areas without additional treatments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh adhesion on multiple substrates\u003c\/strong\u003e, such as concrete, mortar, ceramic, plaster, and plasterboard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable in two grain sizes\u003c\/strong\u003e, L (0.20 mm) and XL (0.40 mm), for different aesthetic effects.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePrepare the substrate with \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.shop\/search?q=Sttandard+Microbase\"\u003eSttandard Microbase\u003c\/a\u003e\u003c\/strong\u003e and other recommended products, ensuring cleanliness, flatness, and stability.\u003c\/li\u003e\n\u003cli\u003eMix 10 kg of powder with 2.7–3.0 L of Acricem resin, depending on the XL grain size.\u003c\/li\u003e\n\u003cli\u003eFirst, pour part of the resin with pigment, then add the powder gradually while mixing with a low-speed mixer for at least 4 min.\u003c\/li\u003e\n\u003cli\u003eApply the mortar with a trowel in a continuous layer, leveling well and respecting expansion joints.\u003c\/li\u003e\n\u003cli\u003eSand between coats if necessary; finish available in matte, satin, or gloss.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e2 kg\/m²\u003c\/strong\u003e in two coats (XL), on a substrate prepared with Microbase.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength:\u003c\/strong\u003e ≥ 11 N\/mm² (28 days)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength:\u003c\/strong\u003e ≥ 45 N\/mm² (28 days)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate:\u003c\/strong\u003e ≥ 1.5 N\/mm² (28 days)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXL particle size:\u003c\/strong\u003e aggregate up to 0.40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging format:\u003c\/strong\u003e 20 kg bucket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eKeep the container closed in a cool, dry place. Protect from moisture and direct sunlight. Maintain at moderate temperatures. Shelf life according to standard storage conditions in original packaging.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781650850173,"sku":"TT01006","price":104.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topciment-Cubo-Sttandard-Microstone-XL_91_1_93.jpg?v=1780928559"},{"product_id":"acricem-5l","title":"Acricem 5L","description":"\u003cp\u003eAcricem is a water-based acrylic resin (component B) that acts as a binder in the preparation of Topciment two-component microcements: \u003ca href=\"https:\/\/www.topciment.shop\/search?q=STTANDARD\"\u003eSttandard\u003c\/a\u003e, \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Natture\"\u003eNatture\u003c\/a\u003e and \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Atlanttic\"\u003eAtlanttic\u003c\/a\u003e. Its main function is to improve the workability, adhesion, impermeability and mechanical resistance of the microcement once dry. In addition, it can be used as a primer to stabilize mineral substrates and ensure a good application base. It is a product free of solvents, plasticizers and ammonia, totally compatible with demanding environments.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eImproves the internal cohesion of the mortar and the flexibility of the coating. \u003c\/li\u003e\n\u003cli\u003eIncreases the impermeability of the microcement and its mechanical resistance. \u003c\/li\u003e\n\u003cli\u003eReduces the risk of cracking due to shrinkage. \u003c\/li\u003e\n\u003cli\u003eAlso works as a primer on cementitious substrates. \u003c\/li\u003e\n\u003cli\u003eWater-based product, solvent-free and easy to apply. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAs microcement component B:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePour the corresponding amount of Acricem resin into a clean container. \u003c\/li\u003e\n\u003cli\u003eAdd the pigment according to the desired proportion, mixing until a homogeneous color is obtained. \u003c\/li\u003e\n\u003cli\u003eThen, gradually add component A (powdered microcement) while mixing with a low-speed mixer. \u003c\/li\u003e\n\u003cli\u003eKnead for at least 4 minutes until a dense, homogeneous mass without lumps is obtained. \u003c\/li\u003e\n\u003cli\u003eLet the mixture rest for a few minutes before applying. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAs a primer on the substrate:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eThe substrate must be clean, dry, stable, free of grease, oil or dust. \u003c\/li\u003e\n\u003cli\u003eApply a thin and uniform layer of Acricem directly with a roller, brush or sprayer. \u003c\/li\u003e\n\u003cli\u003eLet dry between \u003cstrong\u003e30 minutes and a maximum of 24 hours\u003c\/strong\u003e before applying the microcement. \u003c\/li\u003e\n\u003cli\u003eDo not apply if humidity or rain is expected before the product is completely dry. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAs a primer: \u003cstrong\u003e≈ 0.10 L\/m²\u003c\/strong\u003e, depending on the porosity of the substrate. \u003c\/li\u003e\n\u003cli\u003eAs component B: depends on the type and amount of microcement to be mixed. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature:\u003c\/strong\u003e Aqueous dispersion of styrene-acrylic \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-volatile solids:\u003c\/strong\u003e 34–35 % \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.02 ± 0.05 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e Milky white liquid \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH:\u003c\/strong\u003e 7–9 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree of plasticizers, solvents and ammonia\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible application with\u003c\/strong\u003e: Sttandard, Natture and Atlanttic \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 5 L containers \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in its original closed container, protected from humidity and direct sunlight. The temperature must be between 10 °C and 30 °C. Shelf life of \u003cstrong\u003e12 months\u003c\/strong\u003e from the manufacturing date.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781650948477,"sku":"TT01009","price":53.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Acricem_5L_TT01009.jpg?v=1770725542"},{"product_id":"acricem-25l","title":"Acricem 25L","description":"\u003cp\u003eAcricem is a water-based acrylic resin, used as a \u003cstrong\u003ecomponent B\u003c\/strong\u003e in Topciment two-component microcement systems (Sttandard, Natture, and Atlanttic). Its solvent- and plasticizer-free formula provides cohesion, improves mortar workability, and significantly reduces the risk of cracking. Additionally, it can be used as a primer, stabilizing absorbent substrates before applying microcement.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eProvides flexibility and mechanical resistance\u003c\/strong\u003e to microcement mortar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreases the impermeability\u003c\/strong\u003e of the hardened coating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActs as an adhesion bridge\u003c\/strong\u003e, especially effective on porous surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrevents shrinkage cracks\u003c\/strong\u003e by reducing internal stresses.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWater-based\u003c\/strong\u003e product, free of solvents, ammonia, and plasticizers.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAs component B in two-component systems:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePour the amount of Acricem resin into a clean container and add the pigment until a homogeneous color mixture is achieved.\u003c\/li\u003e\n\u003cli\u003eSlowly incorporate component A (powdered microcement) while mixing with a low-speed mixer.\u003c\/li\u003e\n\u003cli\u003eMix for at least 4 minutes until a lump-free, dense, and uniform mass is obtained.\u003c\/li\u003e\n\u003cli\u003eLet the mixture rest briefly before applying with a trowel.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAs a primer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eEnsure that the substrate is dry, firm, clean, and free of loose particles.\u003c\/li\u003e\n\u003cli\u003eApply an even coat of Acricem with a brush, roller, or sprayer, avoiding puddles.\u003c\/li\u003e\n\u003cli\u003eAllow to dry for a \u003cstrong\u003eminimum of 30 minutes\u003c\/strong\u003e and a \u003cstrong\u003emaximum of 24 hours\u003c\/strong\u003e before applying microcement.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAs a primer: approximately \u003cstrong\u003e0.10 L\/m²\u003c\/strong\u003e, depending on the degree of absorption of the substrate.\u003c\/li\u003e\n\u003cli\u003eAs component B: according to the system and amount of microcement used.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical nature:\u003c\/strong\u003e Water-based styrene-acrylic dispersion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid content:\u003c\/strong\u003e 34–35%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.02 ± 0.05 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e Milky white liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH:\u003c\/strong\u003e between 7 and 9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e \u003cstrong\u003e25 L\u003c\/strong\u003e plastic container\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eStore in a \u003cstrong\u003edry and cool place\u003c\/strong\u003e, in its \u003cstrong\u003eoriginal closed container\u003c\/strong\u003e, protected from frost and direct sunlight. Recommended storage temperature: between \u003cstrong\u003e10 °C and 30 °C\u003c\/strong\u003e. Shelf life: \u003cstrong\u003e12 months\u003c\/strong\u003e from the date of manufacture.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651014013,"sku":"TT01010","price":219.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Acricem_25L_TT01010.jpg?v=1770724999"},{"product_id":"acricem-pool-25l","title":"Acricem Pool 25L","description":"\u003cp\u003eAcricem Pool is a \u003cstrong\u003ewater-based acrylic resin\u003c\/strong\u003e that acts as \u003cstrong\u003ecomponent B\u003c\/strong\u003e in the \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.shop\/search?q=Atlanttic+Aquaciment%C2%AE\"\u003eAtlanttic Aquaciment®\u003c\/a\u003e\u003c\/strong\u003e two-component microcement system, designed for coatings in permanent contact with water, such as swimming pools, fountains, and ponds. This product improves the microcement's \u003cstrong\u003eadhesion, impermeability, and mechanical resistance\u003c\/strong\u003e, while increasing its \u003cstrong\u003eflexibility\u003c\/strong\u003e. It can also be applied as a \u003cstrong\u003eprimer\u003c\/strong\u003e for absorbent substrates.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh resistance to moisture\u003c\/strong\u003e, suitable for continuous immersion areas. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves the cohesion of the\u003c\/strong\u003e Atlanttic Aquaciment® system. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreases the flexibility of the coating\u003c\/strong\u003e, reducing the risk of cracks. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be pigmented\u003c\/strong\u003e, promoting uniform finishes. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible as a primer\u003c\/strong\u003e, optimizing adhesion on porous substrates. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAs component B of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Atlanttic+Aquaciment%C2%AE\"\u003eAtlanttic Aquaciment®\u003c\/a\u003e system:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003ePour the corresponding amount of Acricem Pool into a clean container. \u003c\/li\u003e\n\u003cli\u003eAdd the necessary pigment and stir until a homogeneous mixture is obtained. \u003c\/li\u003e\n\u003cli\u003eGradually incorporate component A (powder microcement) while mixing with a low-speed mixer. \u003c\/li\u003e\n\u003cli\u003eBeat until a uniform, lump-free mass is achieved. \u003c\/li\u003e\n\u003cli\u003eLet stand for a few minutes before applying with a metal or rubber trowel. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eAs a primer on absorbent substrates:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eEnsure the surface is clean, dry, and free of grease, dust, or loose particles. \u003c\/li\u003e\n\u003cli\u003eApply a homogeneous coat of Acricem Pool with a roller, brush, or spray equipment. \u003c\/li\u003e\n\u003cli\u003eAllow to dry completely before applying the microcement. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAs a primer: \u003cstrong\u003e≈ 0.10 L\/m²\u003c\/strong\u003e, depending on the absorption level of the substrate. \u003c\/li\u003e\n\u003cli\u003eAs component B: according to the proportions of the Atlanttic Aquaciment® system. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature:\u003c\/strong\u003e Water-based styrene-acrylic dispersion \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Milky white \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePresentation:\u003c\/strong\u003e \u003cstrong\u003e25-liter\u003c\/strong\u003e container \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a dry, well-ventilated place, protected from direct sunlight, at temperatures between \u003cstrong\u003e10 °C and 30 °C\u003c\/strong\u003e. Keep the container closed. Shelf life: \u003cstrong\u003eup to 1 year\u003c\/strong\u003e in original unopened packaging.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651112317,"sku":"TT01016","price":251.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Acricem_Pool_25L_TT01016.png?v=1770730079"},{"product_id":"sttandard-microdeck-r-m-18kg","title":"Sttandard Microdeck® M 18kg","description":"\u003cp\u003eSttandard Microdeck M is a two-component powder microcement designed for continuous decorative finishes on interior floors and walls, with a medium-grain texture that provides a natural effect similar to polished cement. It is used after preparation with Microbase, and when mixed with Acricem resin\u003ca href=\"https:\/\/www.topciment.shop\/search?q=ACRICEM\"\u003e \u003c\/a\u003e (component B), it offers excellent adhesion and mechanical resistance on various substrates such as concrete, ceramics, plaster, or plasterboard.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeamless continuous coating\u003c\/strong\u003e, respecting expansion joints. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplicable on multiple substrates\u003c\/strong\u003e: concrete, mortar, ceramics, plaster, and plasterboard. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent workability\u003c\/strong\u003e and a wide variety of decorative finishes (matte, satin, gloss). \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh adhesion\u003c\/strong\u003e to the substrate for interior use (floors, stairs, shower trays). \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium grain texture\u003c\/strong\u003e that reduces the \"water effect\" compared to Microfino. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: apply Microbase and ensure the surface is clean, flat, and consolidated. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing\u003c\/strong\u003e: 10 kg (powder) + 3.0–3.5 L of Acricem resin + pigment; first dissolve the pigment in resin, then add the powder, mixing with a low-speed mixer. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKneading\u003c\/strong\u003e: mix for at least 4 minutes until a homogeneous, lump-free paste is obtained. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: apply with a trowel in a continuous layer of 1–3 mm, in several coats depending on the desired finish. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing\u003c\/strong\u003e: between coats, it can be lightly sanded to correct imperfections; finish with Topsealer varnish according to the required finish. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003e1.00 kg\/m²\u003c\/strong\u003e in two coats (M particle size) on a prepared base. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength (28 days)\u003c\/strong\u003e: ≥ 10 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength (28 days)\u003c\/strong\u003e: ≥ 35 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate (28 days)\u003c\/strong\u003e: ≥ 1.2 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size\u003c\/strong\u003e: 0.18 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging format\u003c\/strong\u003e: 18 Kg bucket \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a closed container, in a cool, dry place, avoiding extreme heat and humidity. Use within the manufacturer's recommended period.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651177853,"sku":"TT01022","price":93.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Sttandard-Microdeck-Azul-M_91_1_93.jpg?v=1776328395"},{"product_id":"sttandard-microstone-l-20kg","title":"Sttandard Microstone L 20Kg","description":"\u003cp\u003eSttandard Microstone® L is a two-component microcement for professional use designed for exteriors. Its coarse aggregate and mechanical resistance make it the ideal option for coating floors on terraces, patios, facades and other areas exposed to environmental wear. It is applied as a finish after preparation with Microbase, and requires mixing with \u003ca href=\"https:\/\/www.topciment.shop\/search?q=ACRICEM\"\u003eAcricem resin\u003c\/a\u003e to offer a continuous, non-slip and highly durable decorative coating.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent mechanical and wear resistance\u003c\/strong\u003e, even in high-traffic areas. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural non-slip texture\u003c\/strong\u003e, no need to add additional aggregates. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh adhesion\u003c\/strong\u003e on substrates such as concrete, cement, ceramic or mortars. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse aggregate (L)\u003c\/strong\u003e for exterior finishes with maximum robustness. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous and seamless coating\u003c\/strong\u003e, respecting expansion joints of the substrate. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eEnsure the substrate is clean, dry and consolidated. \u003c\/li\u003e\n\u003cli\u003eApply two coats of Microbase as a leveling base. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eMix 10 Kg of Microstone with 2.5 L of Acricem resin. \u003c\/li\u003e\n\u003cli\u003eDissolve the pigment in the resin before incorporating the powder. \u003c\/li\u003e\n\u003cli\u003eMix with a mechanical mixer at low revolutions for at least 4 minutes until a homogeneous paste is achieved. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply two coats with a metal trowel. \u003c\/li\u003e\n\u003cli\u003eAllow to dry between coats and sand lightly if a finer finish is desired. \u003c\/li\u003e\n\u003cli\u003eTo protect, apply \u003ca href=\"https:\/\/www.topciment.shop\/search?q=TOPSEALER\"\u003eTOPSEALER \u003c\/a\u003evarnish depending on the desired finish (matte, satin, gloss). \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApprox. \u003cstrong\u003e2.00 kg\/m²\u003c\/strong\u003e in two coats on a previously leveled surface with Microbase. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexion (28 days):\u003c\/strong\u003e ≥ 10 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression (28 days):\u003c\/strong\u003e ≥ 45 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate (28 days):\u003c\/strong\u003e ≥ 1.2 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size:\u003c\/strong\u003e 0.6 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 20 Kg plastic bucket \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore the product in its original, well-sealed container, in a dry place protected from humidity, between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e. Approximate shelf life: \u003cstrong\u003e1 year\u003c\/strong\u003e from the date of manufacture if unopened.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651243389,"sku":"TT01024","price":104.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topciment-Cubo-Sttandard-Microstone-L_91_1_93.jpg?v=1776328383"},{"product_id":"sttandard-microfino-s-15kg","title":"Sttandard Microfino S 15kg","description":"\u003cp\u003eSttandard Microfino® S is a two-component decorative finishing microcement, specially designed for application on interior walls. Its fine texture provides an elegant finish, silky to the touch and with a marked artisanal character. It acts as a finishing coat over a previous Microbase layer and is mixed with \u003ca href=\"https:\/\/www.topciment.shop\/search?q=ACRICEM\"\u003eAcricem resin\u003c\/a\u003e (component B) to guarantee excellent workability, adhesion, and resistance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine and silky texture\u003c\/strong\u003e, ideal for decorative vertical finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery aesthetic water effect\u003c\/strong\u003e, characteristic of manual work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreat adhesion\u003c\/strong\u003e on substrates such as plaster, plasterboard, cement, etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous coating\u003c\/strong\u003e, no joints required (except for structural expansion).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable finish\u003c\/strong\u003e using different types of sealers (matte, satin, gloss).\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eEnsure a clean, dry surface, free of dust or grease.\u003c\/li\u003e\n\u003cli\u003eApply a previous base of two layers of Microbase, well-leveled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMix 10 kg of Microfino S with approximately 3.0–3.5 L of Acricem resin.\u003c\/li\u003e\n\u003cli\u003eDissolve the pigment in the resin beforehand and add the powder while mixing.\u003c\/li\u003e\n\u003cli\u003eMix with a low-speed electric mixer for at least 4 minutes until a homogeneous mass is obtained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eApply two thin layers of Microfino S with a metal or rubber trowel.\u003c\/li\u003e\n\u003cli\u003eLightly sand between layers if a finer finish is desired.\u003c\/li\u003e\n\u003cli\u003eAllow to dry completely before applying Topsealer sealer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApprox. \u003cstrong\u003e0.50 kg\/m²\u003c\/strong\u003e in two coats on a previously regularized substrate.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexion (28 days):\u003c\/strong\u003e ≥ 7 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression (28 days):\u003c\/strong\u003e ≥ 22 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate (28 days):\u003c\/strong\u003e ≥ 1.2 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size:\u003c\/strong\u003e 0.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 15 kg plastic bucket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a dry, protected place, in its original closed container, between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e. Shelf life: \u003cstrong\u003eup to 1 year\u003c\/strong\u003e from the manufacturing date unopened.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651341693,"sku":"TT01028","price":78.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topciment-Cubo-Sttandard-Microfino-S_91_1_93.jpg?v=1780928893"},{"product_id":"sttandard-microbase-xl-22kg","title":"Sttandard Microbase XL 22Kg","description":"\u003cp\u003e\u003ca\u003eSttandard Microbase® XL\u003c\/a\u003e is a two-component preparation microcement, formulated by \u003cstrong\u003eTopciment®\u003c\/strong\u003e as a structural base for decorative microcement systems. Its XL granulometry makes it especially suitable for substrates that require prior leveling, providing perfect anchorage for finishing layers such as \u003ca\u003eSttandard Microdeck\u003c\/a\u003e or \u003ca\u003eMicrofino\u003c\/a\u003e. It is mixed with \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/resina-microcemento-acricem\"\u003eACRICEM®\u003c\/a\u003e resin as component B.\u003c\/p\u003e\u003cp\u003eIdeal for indoor and outdoor application on horizontal and vertical surfaces, it guarantees a firm, durable and perfectly adhered base.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh compression and flexural strength\u003c\/strong\u003e, ideal as a base coat for demanding floors. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium XL granulometry\u003c\/strong\u003e, which improves the grip of the finishing layers. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplicable on multiple substrates\u003c\/strong\u003e: concrete, mortar, ceramic, plaster, etc. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust texture\u003c\/strong\u003e, perfect for leveling surfaces before fine finishes. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with all Topciment® systems\u003c\/strong\u003e, including \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTOPSEALER®\u003c\/a\u003e varnishes. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eClean the surface of dust, grease or poorly adhered residues. \u003c\/li\u003e\n\u003cli\u003eEnsure it is completely dry and level. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eMix 10 kg of Sttandard Microbase XL with approx. 2.5 L of ACRICEM resin. \u003c\/li\u003e\n\u003cli\u003eFirst add the pigment to the resin and then the powder component. \u003c\/li\u003e\n\u003cli\u003eMix with an electric mixer for at least 4 minutes until a uniform paste is obtained. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply two coats with a metal trowel over the appropriate primer. \u003c\/li\u003e\n\u003cli\u003eAllow to dry between coats and sand if desired to smooth the surface. \u003c\/li\u003e\n\u003cli\u003eContinue with the decorative system by applying Sttandard Microdeck or Microfino and protect with \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e2.00 kg\/m²\u003c\/strong\u003e in two coats. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexion (28 days):\u003c\/strong\u003e ≥ 11 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression (28 days):\u003c\/strong\u003e ≥ 45 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate (28 days):\u003c\/strong\u003e ≥ 1.2 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size:\u003c\/strong\u003e 0.3 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 22 kg plastic container \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a dry, ventilated place protected from humidity, between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e. The product has a shelf life of \u003cstrong\u003e12 months\u003c\/strong\u003e from the date of manufacture, in its original sealed container.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651407229,"sku":"TT01033","price":80.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Sttandard-Microbase-Azul-XL_91_1_93.jpg?v=1780928920"},{"product_id":"sttandard-microbase-xxl-24kg","title":"Sttandard Microbase XXL 24Kg","description":"\u003cp\u003e\u003ca\u003eSttandard Microbase® XXL\u003c\/a\u003e is a two-component preparation microcement developed by \u003cstrong\u003eTopciment®\u003c\/strong\u003e to create a solid, structured, and highly resistant base in microcement systems. Thanks to its coarse (XXL) granulometry, it provides excellent substrate leveling before applying finishing coats such as \u003ca\u003eMicrodeck\u003c\/a\u003e or \u003ca\u003eMicrofino\u003c\/a\u003e. It is used as component A, combined with Acricem resin (component B), in continuous high-durability coatings for interiors and exteriors.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh hardness and mechanical resistance\u003c\/strong\u003e, ideal for floors and high-traffic areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile application indoors and outdoors\u003c\/strong\u003e, on substrates such as concrete, mortar, or ceramic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect as a base layer\u003c\/strong\u003e, with excellent substrate leveling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse granulometry (XXL)\u003c\/strong\u003e which provides a robust texture and facilitates the anchoring of upper layers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal compatibility with other Topciment systems\u003c\/strong\u003e, such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTOPSEALER®\u003c\/a\u003e or \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/resina-microcemento-acricem\"\u003eACRICEM®\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eEnsure the surface is clean, dry, and free of grease or dust.\u003c\/li\u003e\n\u003cli\u003eCorrect irregularities and check for flatness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMix 10 kg of Sttandard Microbase XXL with approx. 2.5 L of Acricem resin.\u003c\/li\u003e\n\u003cli\u003eDissolve the pigment in the resin and add the powder while mixing.\u003c\/li\u003e\n\u003cli\u003eUse a mechanical mixer at low revolutions for at least 4 minutes until a homogeneous, lump-free paste is obtained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eApply two coats of Microbase XXL with a metal trowel.\u003c\/li\u003e\n\u003cli\u003eAllow each coat to dry and sand if a more uniform texture is desired.\u003c\/li\u003e\n\u003cli\u003eContinue the system with two coats of finishing product (Microdeck or Microfino) and seal with \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer varnish\u003c\/a\u003e to protect the system.\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApprox. \u003cstrong\u003e2.80 kg\/m²\u003c\/strong\u003e in two coats (Microbase XXL).\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength (28 days):\u003c\/strong\u003e ≥ 11 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength (28 days):\u003c\/strong\u003e ≥ 45 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate (28 days):\u003c\/strong\u003e ≥ 1.2 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size:\u003c\/strong\u003e 0.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 24 Kg plastic bucket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eKeep the product in its original closed container, in a dry place protected from humidity, between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e. Shelf life: \u003cstrong\u003e1 year\u003c\/strong\u003e from its manufacturing date, unopened.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651505533,"sku":"TT01034","price":87.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Sttandard-Microbase-Azul-XXL_91_1_93.jpg?v=1780928949"},{"product_id":"atlanttic-aquaciment-r-xxl-18kg-1","title":"Atlanttic Aquaciment® XXL 18kg","description":"\u003cp\u003e\u003ca\u003eAtlanttic Aquaciment® XXL\u003c\/a\u003e is a two-component microcement specially designed to coat surfaces in constant contact with water, such as \u003cstrong\u003eswimming pools, ponds, spas, or fountains\u003c\/strong\u003e. Thanks to its advanced formulation, it provides a continuous, seamless surface with great resistance and a high-quality natural aesthetic finish.\u003c\/p\u003e\u003cp\u003eIts coarse granulometry (XXL) gives it a more non-slip and robust texture, ideal as a base coat before the final finish. It is perfect for both \u003cstrong\u003einteriors and exteriors\u003c\/strong\u003e, on floors, walls, and pool basins, ensuring excellent performance against humidity, chemicals, and atmospheric agents.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof and resistant coating\u003c\/strong\u003e, suitable for direct contact with water. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-slip texture\u003c\/strong\u003e, ideal for edges and traffic areas in swimming pools. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreat adhesion\u003c\/strong\u003e, even on very porous surfaces. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical resistance\u003c\/strong\u003e, withstands pressure, impacts, and intense use. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecorative and uniform finish\u003c\/strong\u003e, compatible with \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer#topsealer-wt-pool\"\u003eTopsealer WT Pool\u003c\/a\u003e for greater protection.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eClean the surface thoroughly and ensure it is dry, free of dust and grease. \u003c\/li\u003e\n\u003cli\u003eIf necessary, apply a primer like \u003ca\u003ePrimacem Plus\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eMix Atlanttic Aquaciment® XXL powder with \u003cstrong\u003eAtlanttic Resin\u003c\/strong\u003e (component B) in the proportion indicated in the technical sheet. \u003c\/li\u003e\n\u003cli\u003eStir until a uniform, lump-free mixture is obtained. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eApply two coats with a metal trowel. \u003c\/li\u003e\n\u003cli\u003eAllow to dry and sand if necessary. \u003c\/li\u003e\n\u003cli\u003eFor the finish, it is recommended to apply \u003ca\u003eAtlanttic Aquaciment® Medium\u003c\/a\u003e and finish with the protective varnish \u003cstrong\u003eTopsealer WT Pool\u003c\/strong\u003e. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e2 kg\/m²\u003c\/strong\u003e per coat. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexion (28 days):\u003c\/strong\u003e ≥ 11 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression (28 days):\u003c\/strong\u003e ≥ 45 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion:\u003c\/strong\u003e ≥ 1.2 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size:\u003c\/strong\u003e 0.5 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePresentation:\u003c\/strong\u003e 18 Kg container \u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a dry and protected place, between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e. Shelf life of \u003cstrong\u003e12 months\u003c\/strong\u003e in original closed container.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651636605,"sku":"TT01050","price":79.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/ATLANTTIC-XXL-2023.png?v=1776332263"},{"product_id":"atlanttic-aquaciment-r-xl-18kg-1","title":"Atlanttic Aquaciment® XL 18Kg","description":"\u003cp\u003e\u003ca\u003eAtlanttic Aquaciment® XL\u003c\/a\u003e is a two-component microcement specially formulated for decorating surfaces in permanent contact with water, such as \u003cstrong\u003eswimming pools, fountains, spas, or outdoor wet areas\u003c\/strong\u003e. Its XL granulometry provides a perfect balance between fine texture and high resistance, ideal for achieving a natural, continuous, and seamless finish.\u003c\/p\u003e\u003cp\u003eThis microcement is developed to perform effectively in conditions of constant humidity, providing durability, adhesion, and an elegant and professional aesthetic. It is compatible with the entire \u003cstrong\u003eAtlanttic\u003c\/strong\u003e system, allowing for the creation of 100% microcement-coated pools, both in the shell and in the surrounding areas.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent water resistance\u003c\/strong\u003e, suitable for areas of constant immersion. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreat workability and adhesion\u003c\/strong\u003e, even on very porous surfaces. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniform texture\u003c\/strong\u003e, ideal as a preparation layer before the final finish. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical and chemical resistance\u003c\/strong\u003e, perfect for exteriors and exposed areas. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Topsealer WT Pool varnishes\u003c\/strong\u003e, for maximum protection and durability. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eEnsure the surface is clean, dry, and free of dust, grease, or moisture. \u003c\/li\u003e\n\u003cli\u003eApply an appropriate primer such as \u003ca\u003ePrimacem Plus\u003c\/a\u003e if the substrate requires it. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct mixing\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eMix 10 kg of Atlanttic Aquaciment® XL with approximately 2.5 L of \u003cstrong\u003eAtlanttic Resin\u003c\/strong\u003e (component B). \u003c\/li\u003e\n\u003cli\u003eUse an electric mixer until a homogeneous, lump-free paste is obtained. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply in 2 coats with a metal trowel. \u003c\/li\u003e\n\u003cli\u003eSand between coats if a finer texture is desired. \u003c\/li\u003e\n\u003cli\u003eFinish with \u003ca\u003eAtlanttic Aquaciment® Medium\u003c\/a\u003e as a finishing coat and protect with \u003cstrong\u003eTopsealer WT Pool\u003c\/strong\u003e. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e1.5 kg\/m²\u003c\/strong\u003e per coat. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength (28 days):\u003c\/strong\u003e ≥ 11 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength (28 days):\u003c\/strong\u003e ≥ 45 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion:\u003c\/strong\u003e ≥ 1.2 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size:\u003c\/strong\u003e 0.4 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 18 kg container.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a dry place, between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e. Shelf life of \u003cstrong\u003e12 months\u003c\/strong\u003e in its original sealed container.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651702141,"sku":"TT01051","price":112.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/ATLANTTIC-XL-2023.png?v=1776332260"},{"product_id":"evoluttion-microbase-l-20kg","title":"Evoluttion Microbase L 20kg","description":"\u003cp\u003e\u003ca\u003eEvoluttion Microbase® L\u003c\/a\u003e is a single-component preparation microcement, specially formulated for use as a base in continuous decorative systems. Its L granulometry provides a more robust texture, ideal for ensuring the adhesion and consistency of subsequent layers.\u003c\/p\u003e\u003cp\u003eThis microcement combines the convenience of a powder product that mixes only with water, eliminating the need for resins. It is perfect for \u003cstrong\u003eindoor and outdoor floors and walls\u003c\/strong\u003e, and stands out for its excellent workability, mechanical resistance, and natural aesthetic.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component\u003c\/strong\u003e: only requires water for preparation, which facilitates on-site work. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh adhesion\u003c\/strong\u003e: excellent fixation on substrates such as cement, plaster or tiles. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh resistance\u003c\/strong\u003e: to compression and flexion, ensuring durability. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal as a base coat\u003c\/strong\u003e: improves the stability of the complete decorative system. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRustic finish\u003c\/strong\u003e: with a more pronounced texture, ideal for industrial and natural styles. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eClean and dry the surface. \u003c\/li\u003e\n\u003cli\u003eApply an appropriate primer such as \u003ca\u003ePrimacem Plus\u003c\/a\u003e if the substrate is absorbent, or \u003ca\u003ePrimacem ABS\u003c\/a\u003e if it is not. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct mixing\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eMix approximately 5.5 L of water for each 20 kg bag. \u003c\/li\u003e\n\u003cli\u003eStir with an electric mixer until a homogeneous, lump-free paste is obtained. \u003c\/li\u003e\n\u003cli\u003eLet the mixture rest for 2 minutes before applying. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply with a metal trowel in two coats. \u003c\/li\u003e\n\u003cli\u003eLightly sand between coats with 40 or 80 grit. \u003c\/li\u003e\n\u003cli\u003eAfter drying, apply a finishing microcement such as \u003cstrong\u003eEvoluttion Microfino\u003c\/strong\u003e or \u003cstrong\u003eEvoluttion Microdeck\u003c\/strong\u003e, depending on the desired use. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e2.80 kg\/m²\u003c\/strong\u003e per coat. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to the substrate\u003c\/strong\u003e: ≥ 1.2 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength (28 days)\u003c\/strong\u003e: ≥ 22 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength (28 days)\u003c\/strong\u003e: ≥ 10 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size\u003c\/strong\u003e: 0.40 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 20 Kg \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a dry, protected place, between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e. Product valid for \u003cstrong\u003e12 months\u003c\/strong\u003e in original sealed container.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651800445,"sku":"TT01114","price":106.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Evoluttion-Microbase-L-20Kg.jpg?v=1780929095"},{"product_id":"evoluttion-microfino-s-15kg","title":"Evoluttion Microfino S 15kg","description":"\u003cp\u003e\u003ca\u003eEvoluttion Microfino® S\u003c\/a\u003e is a single-component finishing microcement, developed to provide a fine and elegant finish on vertical surfaces such as walls and decorative furniture. Its powder formula, ready to mix with just water, simplifies application and reduces on-site errors.\u003c\/p\u003e\u003cp\u003eIt stands out for its \u003cstrong\u003esmooth and silky texture to the touch\u003c\/strong\u003e, allowing for a sophisticated and natural aesthetic finish, ideal for contemporary or minimalist environments. It is resistant, versatile, and compatible with interiors and exteriors.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical single-component\u003c\/strong\u003e: mixes only with water, no resins needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine and natural finish\u003c\/strong\u003e: ideal for walls, furniture, and decorative areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh workability\u003c\/strong\u003e: easy to apply and smooth, allowing for multiple aesthetic effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood mechanical resistance\u003c\/strong\u003e: suitable for professional use indoors and outdoors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable in various particle sizes\u003c\/strong\u003e: to adapt to the desired level of detail (S, M, L).\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eClean and ensure a dry and stable surface.\u003c\/li\u003e\n\u003cli\u003eApply a suitable primer (\u003ca\u003ePrimacem ABS\u003c\/a\u003e or \u003ca\u003ePrimacem Plus\u003c\/a\u003e), depending on the type of substrate.\u003c\/li\u003e\n\u003cli\u003ePreviously apply a base like \u003cstrong\u003eEvoluttion Microbase®\u003c\/strong\u003e to improve the adhesion and resistance of the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct mixing\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003ePour approximately 5.5 L of water per 15 Kg bag.\u003c\/li\u003e\n\u003cli\u003eMix with an electric mixer until a homogeneous, lump-free paste is obtained.\u003c\/li\u003e\n\u003cli\u003eAllow to rest for 2 minutes before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply in two or three coats with a flexible metal trowel.\u003c\/li\u003e\n\u003cli\u003eLightly sand between coats with 220-grit sandpaper to achieve a perfect finish.\u003c\/li\u003e\n\u003cli\u003eProtect the surface with a sealer like \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT One Coat\u003c\/a\u003e, ensuring resistance and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e0.50 kg\/m²\u003c\/strong\u003e per coat.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate\u003c\/strong\u003e: ≥ 1.2 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength (28 days)\u003c\/strong\u003e: ≥ 22 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength (28 days)\u003c\/strong\u003e: ≥ 10 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size (S)\u003c\/strong\u003e: 0.10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 15 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore the product in its original, sealed, and protected container, between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e.\u003cbr\u003eShelf life: \u003cstrong\u003e12 months\u003c\/strong\u003e from the date of manufacture.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651898749,"sku":"TT01118","price":105.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topciment-Cubo-Evoluttion-Microfino-S_91_1_93.jpg?v=1780929115"},{"product_id":"evoluttion-microbase-xxl-20kg","title":"Evoluttion Microbase XXL 20kg","description":"\u003cp\u003e\u003cstrong\u003eEvoluttion Microbase XXL\u003c\/strong\u003e is a \u003cstrong\u003esingle-component preparation microcement\u003c\/strong\u003e designed to be the first layer in continuous decorative coating systems. With a coarse grain size, this product provides high consistency, ideal for creating a good structural base before applying decorative finishes such as \u003ca\u003eEvoluttion Microdeck\u003c\/a\u003e or \u003ca\u003eEvoluttion Microfino\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eAs it does not require additional resins and is mixed only with water, it is a practical solution for construction professionals, microcement applicators, and decorators looking for \u003cstrong\u003eresistant floor microcement\u003c\/strong\u003e, \u003cstrong\u003eoutdoor microcement base\u003c\/strong\u003e, or \u003cstrong\u003eproducts for renovations without construction work\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRecommended for high-traffic floors, textured walls, irregular substrates, or quick renovations.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component\u003c\/strong\u003e: ready to mix with water, without resins or additional components. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXXL coarse texture\u003c\/strong\u003e: ideal for obtaining a surface with body and good adhesion. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical resistance\u003c\/strong\u003e: excellent performance against compression and bending. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility\u003c\/strong\u003e: suitable for interiors, exteriors, floors, walls, and furniture. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect primer for decorative finishes\u003c\/strong\u003e: improves the durability and final aesthetics of the system. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eThe surface must be clean, dry, firm, and free of grease or dust. \u003c\/li\u003e\n\u003cli\u003ePrime with \u003ca\u003ePrimacem Plus\u003c\/a\u003e or \u003ca\u003ePrimacem ABS\u003c\/a\u003e, depending on the substrate. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct mixing\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eMix the contents of the bag with approximately \u003cstrong\u003e5.5 L of water for every 20 kg\u003c\/strong\u003e of product. \u003c\/li\u003e\n\u003cli\u003eUse an electric low-speed mixer until a homogeneous mass is achieved. \u003c\/li\u003e\n\u003cli\u003eLet stand for 2 minutes before application. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply two coats of product with a metal trowel. \u003c\/li\u003e\n\u003cli\u003eSand between coats with 40 or 80 grit sandpaper. \u003c\/li\u003e\n\u003cli\u003eAllow to dry completely before applying the finishing coat. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eOnce the complete system has been applied, protect with varnishes such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT Dragon\u003c\/a\u003e to ensure resistance to stains, water, and abrasion. \u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApprox. \u003cstrong\u003e2.80 kg\/m²\u003c\/strong\u003e per coat. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate\u003c\/strong\u003e: ≥ 1.2 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength (28 days)\u003c\/strong\u003e: ≥ 22 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength (28 days)\u003c\/strong\u003e: ≥ 10 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size (XXL)\u003c\/strong\u003e: 0.63 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 20 Kg \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in its original, sealed container in a dry place between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 12 months. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781651997053,"sku":"TT01119","price":106.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Evoluttion-Microbase-XXL-20Kg.jpg?v=1780929218"},{"product_id":"evoluttion-microbase-xl-20kg","title":"Evoluttion Microbase XL 20kg","description":"\u003cp\u003e\u003cstrong\u003eEvoluttion Microbase XL\u003c\/strong\u003e is a single-component microcement designed as a preparation layer for continuous coating systems. With a medium-coarse aggregate size, it provides excellent mechanical stability, ideal for ensuring a robust base before applying finishes such as Evoluttion Microdeck or Evoluttion Microfino.\u003c\/p\u003e\u003cp\u003eThanks to its formulation, which only requires water and no external resins, it is a convenient, reliable, and economical product. It is suitable for \u003cstrong\u003einteriors and exteriors\u003c\/strong\u003e, on surfaces such as floors, walls, countertops, and furniture.\u003c\/p\u003e\u003cp\u003eIdeal for professionals looking for \u003cstrong\u003ehigh-adhesion microcement\u003c\/strong\u003e, \u003cstrong\u003emicrocement base for floors\u003c\/strong\u003e, or \u003cstrong\u003edurable coatings for renovations without construction work\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component product\u003c\/strong\u003e: mixes only with water, simplifying application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion\u003c\/strong\u003e: ideal for substrates such as mortar, plaster, ceramic, or cement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXL aggregate size\u003c\/strong\u003e: medium-coarse texture that offers high mechanical resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal preparation\u003c\/strong\u003e: improves bonding with upper layers of decorative microcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile\u003c\/strong\u003e: applicable on floors, walls, interiors, and exteriors.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eEnsure a clean, dry, firm, and grease-free surface.\u003c\/li\u003e\n\u003cli\u003ePrime with Primacem Plus (porous substrates) or Primacem ABS (non-porous substrates).\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct mixing\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eMix each 20 Kg bag with approximately \u003cstrong\u003e5.5 L of water\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eStir with an electric mixer until a uniform, lump-free mixture is achieved.\u003c\/li\u003e\n\u003cli\u003eLet stand for 2 minutes before application.\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply two coats with a metal trowel.\u003c\/li\u003e\n\u003cli\u003eSand between coats with grit 40 or 80.\u003c\/li\u003e\n\u003cli\u003eAllow to dry completely before applying the finishing coat.\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal protection\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eSeal the complete system with varnishes such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT Dragon\u003c\/a\u003e for water, abrasion, and stain resistant protection.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApprox. \u003cstrong\u003e2.80 kg\/m²\u003c\/strong\u003e per coat.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate\u003c\/strong\u003e: ≥ 1.2 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength (28 days)\u003c\/strong\u003e: ≥ 22 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength (28 days)\u003c\/strong\u003e: ≥ 10 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum aggregate size (XL)\u003c\/strong\u003e: 0.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 20 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry place between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 12 months in its original sealed container.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781652095357,"sku":"TT01120","price":106.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Evoluttion-Microbase-XL-20Kg.jpg?v=1780929286"},{"product_id":"evoluttion-microdeck-r-m-18kg","title":"Evoluttion Microdeck® M 18Kg","description":"\u003cp\u003e\u003cstrong\u003eEvoluttion Microdeck® M\u003c\/strong\u003e is a single-component finishing microcement, specially designed for application on interior floors. With a medium texture, it is characterized by its natural and continuous aesthetic, with non-slip properties that make it an ideal option for high-traffic areas, such as homes, offices, and commercial establishments.\u003c\/p\u003e\u003cp\u003eThis high-performance coating is mixed only with water, eliminating the need for additional resins, which simplifies its use on site and guarantees a homogeneous result. It is compatible with radiant heating systems and can be applied over cement, mortar, ceramic, or plaster.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical single-component\u003c\/strong\u003e: only requires water for mixing, no external resins needed. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh traffic resistance\u003c\/strong\u003e: optimal for floors subject to daily use. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-slip texture\u003c\/strong\u003e: natural finish that enhances safety. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple and quick application\u003c\/strong\u003e: ideal for decorative coating professionals. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous and seamless finish\u003c\/strong\u003e: improves the aesthetics of modern interiors. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eDetailed instructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eEnsure the substrate is clean, dry, consolidated, and free of grease or contaminants. \u003c\/li\u003e\n\u003cli\u003eApply an appropriate primer depending on the type of surface: \u003cul\u003e\n\u003cli\u003eFor absorbent substrates: \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/imprimaciones-y-promotores-de-adherencia-primacem#primacem-plus\"\u003ePrimacem Plus\u003c\/a\u003e \u003c\/li\u003e\n\u003cli\u003eFor non-absorbent substrates: \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/imprimaciones-y-promotores-de-adherencia-primacem#primacem-abs\"\u003ePrimacem ABS\u003c\/a\u003e \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003eFor ceramic surfaces, apply a prior bonding coat to improve adhesion. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase application\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply 2 coats of \u003cstrong\u003eEvoluttion Microbase\u003c\/strong\u003e as a preparatory layer, sanding between coats with 40-grit sandpaper. \u003c\/li\u003e\n\u003cli\u003eThis step is mandatory to provide body and anchorage to the system. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003ePour \u003cstrong\u003e4.5 liters of clean water\u003c\/strong\u003e for each 18 kg bag of \u003cstrong\u003eEvoluttion Microdeck M\u003c\/strong\u003e. \u003c\/li\u003e\n\u003cli\u003eMix with a low-speed electric mixer for 2-3 minutes until a homogeneous, lump-free paste is obtained. \u003c\/li\u003e\n\u003cli\u003eAllow the mixture to rest for 2 minutes before use. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct application\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply 2 thin coats of \u003cstrong\u003eEvoluttion Microdeck M\u003c\/strong\u003e with a flexible steel trowel. \u003c\/li\u003e\n\u003cli\u003eRespect the drying time between coats (approximately 4-6 hours). \u003c\/li\u003e\n\u003cli\u003eSand between coats with 80-120 grit sandpaper to achieve a fine and uniform finish. \u003c\/li\u003e\n\u003cli\u003eThe total thickness should not exceed 2 mm. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing and final protection\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eOnce the application is complete and fully dry (min. 24 hours), proceed with sealing using the protection system.\u003cbr\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e1.40 kg\/m²\u003c\/strong\u003e per coat. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength\u003c\/strong\u003e: ≥ 30 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength\u003c\/strong\u003e: ≥ 11 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate\u003c\/strong\u003e: ≥ 1.5 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGranulometry\u003c\/strong\u003e: 0.30 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder density\u003c\/strong\u003e: 1.175 ± 0.050 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 18 kg bag \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a dry, ventilated place, protected from humidity, between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e.\u003cbr\u003e \u003cstrong\u003eShelf life\u003c\/strong\u003e: 12 months from the manufacturing date, in original sealed packaging.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781652160893,"sku":"TT01127","price":124.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topciment-Cubo-Evoluttion-Microdeck-M_91_1_93.jpg?v=1776328999"},{"product_id":"evoluttion-microdeck-r-l-18kg-1","title":"Evoluttion Microdeck® L 18Kg","description":"\u003cp\u003e\u003cstrong\u003eEvoluttion Microdeck® L\u003c\/strong\u003e is a single-component finishing microcement, specially designed for application on walkable interior surfaces. It offers a uniform finish, with a medium texture and natural appearance, ideal for floors in homes and commercial spaces.\u003c\/p\u003e\u003cp\u003eThis product only requires water for preparation, facilitating the mixing process and reducing the margin of error on site. It is part of the single-component system\u003ca href=\"https:\/\/www.topciment.shop\/search?q=Evoluttion\"\u003e Evoluttion by Topciment\u003c\/a\u003e, a range of microcements that guarantee professional performance with great resistance and durability.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-component\u003c\/strong\u003e: only mixed with water, no additional resins needed. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh adhesion\u003c\/strong\u003e: can be applied on multiple substrates, such as cement, self-leveling compounds, plaster, etc. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium and natural texture\u003c\/strong\u003e: provides a silky and uniform finish. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical resistance\u003c\/strong\u003e: suitable for medium-high traffic areas. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible system\u003c\/strong\u003e: applied after Evoluttion Microbase and protected with Topsealer varnishes. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eThe substrate must be clean, dry, free of dust, oils, and paint residue. \u003c\/li\u003e\n\u003cli\u003eApply the appropriate primer (\u003ca href=\"https:\/\/www.topciment.shop\/search?q=Primacem+Plus\"\u003ePrimacem Plus\u003c\/a\u003e or \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Primacem+ABS\"\u003ePrimacem ABS\u003c\/a\u003e) depending on the substrate's absorption. \u003c\/li\u003e\n\u003cli\u003eApply 2 coats of \u003cstrong\u003eEvoluttion Microbase\u003c\/strong\u003e as the base layer, sanding with 40 grit between coats. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eMix with water at a ratio of 20% (approx. 4.5 L of water per 18 kg of product). \u003c\/li\u003e\n\u003cli\u003eUse a low-speed electric mixer until a homogeneous mixture is obtained. \u003c\/li\u003e\n\u003cli\u003eLet stand for 2 minutes before applying. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct application\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply 2 thin coats of \u003cstrong\u003eEvoluttion Microdeck® L\u003c\/strong\u003e with a flexible steel trowel. \u003c\/li\u003e\n\u003cli\u003eSand between coats with 80-120 grit. \u003c\/li\u003e\n\u003cli\u003eOnce dry, apply the sealing system (2 coats of Presealer + 2 coats of \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer+WT+Dragon\"\u003eTopsealer WT Dragon\u003c\/a\u003e in matte, gloss, or satin finish). \u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eEvoluttion Microdeck® L\u003c\/strong\u003e: 1.40 kg\/m² per coat. \u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGranulometry\u003c\/strong\u003e: 0.20 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder density\u003c\/strong\u003e: 1.175 ± 0.050 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength\u003c\/strong\u003e: ≥ 11 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength\u003c\/strong\u003e: ≥ 30 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion to substrate\u003c\/strong\u003e: ≥ 1.5 N\/mm² \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 18 kg \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in its original closed container, protected from humidity, in a dry place at temperatures between \u003cstrong\u003e5 °C and 30 °C\u003c\/strong\u003e.\u003cbr\u003e \u003cstrong\u003eShelf life\u003c\/strong\u003e: 12 months from the manufacturing date.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781652226429,"sku":"TT01128","price":124.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topciment-Cubo-Evoluttion-Microdeck-L_91_1_93.jpg?v=1776329002"},{"product_id":"efectto-quartz-big-grain-6kg","title":"Efectto Quartz Big Grain 6Kg","description":"\u003cp\u003eEfectto Quartz Big Grain is a ready-to-use, thick-grain paste microcement designed to achieve decorative finishes with a strong texture. This high-performance continuous coating is applied directly without the need to mix with water or resin, which reduces execution times and dosing errors.\u003c\/p\u003e\u003cp\u003eThanks to its formulation, it offers excellent adhesion on multiple substrates, making it an ideal solution for renovating surfaces indoors and outdoors, both horizontal and vertical. The final result is a natural and resistant finish, perfect for rustic, industrial or contemporary environments.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eReady to use: no prior mixing required.\u003c\/li\u003e\n\u003cli\u003eHigh adhesion on multiple substrates.\u003c\/li\u003e\n\u003cli\u003eGreat mechanical resistance and durability.\u003c\/li\u003e\n\u003cli\u003eThick textured finish, ideal for floors or decorative surfaces.\u003c\/li\u003e\n\u003cli\u003eCompatible with protection systems such as Topsealer WT One Coat.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eThe substrate must be firm, clean and dry.\u003c\/li\u003e\n\u003cli\u003ePrime with Primacem ABS (absorbent substrates) or Primacem Plus (non-absorbent).\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eHomogenize the product before applying.\u003c\/li\u003e\n\u003cli\u003eApply 1 or 2 coats with a flexible steel trowel.\u003c\/li\u003e\n\u003cli\u003eSand between coats if a smoother finish is desired.\u003c\/li\u003e\n\u003cli\u003eFinish the system with two coats of polyurethane varnish such as Topsealer WT One Coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately 1.8 kg\/m² in two coats.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGrain size: 0.6 mm\u003c\/li\u003e\n\u003cli\u003eDensity: 1.63 ± 0.02 g\/cm³\u003c\/li\u003e\n\u003cli\u003epH: 8 ± 1\u003c\/li\u003e\n\u003cli\u003eViscosity: 100 – 120 Pa·s (Brookfield, at 20°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat: 6 kg container\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore the product sealed in its original container, between 5°C and 30°C.\u003cbr\u003e Avoid direct exposure to sun or humidity.\u003cbr\u003e \u003cstrong\u003eShelf life\u003c\/strong\u003e: up to 1 year from the manufacturing date.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781652324733,"sku":"TT01210","price":84.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topciment-Cubo-Efectto-Big-Grain-6Kg_91_1_93_d98539fe-1a20-473d-8967-95311b557e9b.jpg?v=1776335046"},{"product_id":"efectto-quartz-small-grain-17kg","title":"Efectto Quartz Small Grain 17Kg","description":"\u003cp\u003eEfectto Quartz Small Grain is a ready-to-use microcement with fine aggregate, specially formulated to achieve uniform, smooth, and continuous finishes on vertical and horizontal surfaces. Its direct application—without the need to mix with resins or water—reduces errors, saves time, and facilitates the professional execution of decorative works of high aesthetic value.\u003c\/p\u003e\u003cp\u003eThis paste microcement adheres excellently to substrates such as plaster, tile, cement, or plasterboard. It provides a finish of great visual finesse and is ideal as a finishing layer in multi-layer systems such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e, especially in combination with products like \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto#efectto-quartz-big-grain\"\u003eEfectto Quartz Big Grain\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003ePerfect for renovations without construction, this product is designed for professionals seeking ease of use and fine finishes without sacrificing strength and durability.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eDirect application: no need to mix with water or resin.\u003c\/li\u003e\n\u003cli\u003eFine texture: ideal for smooth finishes on walls and furniture.\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to multiple substrates.\u003c\/li\u003e\n\u003cli\u003eHigh performance and workability.\u003c\/li\u003e\n\u003cli\u003eCompatible with sealers such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer#topsealer-wt-one-coat\"\u003eTopsealer WT One Coat\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eEnsure the surface is firm, dry, and clean.\u003c\/li\u003e\n\u003cli\u003eApply an appropriate primer: Primacem ABS (absorbent substrates) or Primacem Plus (non-absorbent).\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct application\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eHomogenize the product in its container before applying.\u003c\/li\u003e\n\u003cli\u003eApply 1 or 2 coats with a flexible metal trowel.\u003c\/li\u003e\n\u003cli\u003eAllow to dry and sand between coats for a finer finish (grit 220-400).\u003c\/li\u003e\n\u003cli\u003eSeal with two coats of \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer\u003c\/a\u003e for final protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately 0.8 kg\/m² (two coats).\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGrain size: 0.125 mm\u003c\/li\u003e\n\u003cli\u003eDensity: 1.63 ± 0.02 g\/cm³\u003c\/li\u003e\n\u003cli\u003epH: 8 ± 1\u003c\/li\u003e\n\u003cli\u003eViscosity: 100 – 120 Pa·s (Brookfield, at 20°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat: 17 kg container\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore between 5°C and 30°C in a dry, cool place.\u003cbr\u003e Avoid direct sunlight or humidity.\u003cbr\u003e \u003cstrong\u003eShelf life\u003c\/strong\u003e: up to 1 year in original unopened container.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781652423037,"sku":"TT01211","price":220.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/microcemento-efectto-small-grain_91_1_93.jpg?v=1776335048"},{"product_id":"efectto-quartz-small-grain-6kg","title":"Efectto Quartz Small Grain 6kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto Quartz Small Grain\u003c\/strong\u003e is a ready-to-use microcement with a fine grain size specially designed for high-quality continuous and decorative finishes. Being formulated as a paste, it does not require prior mixing with water or resin, which speeds up the application process and reduces errors. Ideal for vertical surfaces indoors, it provides a smooth, uniform, and highly aesthetic finish.\u003c\/p\u003e\u003cp\u003eThis single-component microcement stands out for its excellent workability, resistance, and ease of use, making it the perfect choice as a finishing coat in multi-layer systems such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e, combining perfectly with \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto#efectto-quartz-big-grain\"\u003eEfectto Quartz Big Grain\u003c\/a\u003e or \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto#efectto-quartz-medium-grain\"\u003eEfectto Quartz Medium Grain\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to use\u003c\/strong\u003e: no mixing required, easy to apply. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine particle size (0.125 mm)\u003c\/strong\u003e: ideal for smooth and delicate finishes. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplicable on multiple substrates\u003c\/strong\u003e: plaster, cement, tiles, plasterboard, etc. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreat adhesion\u003c\/strong\u003e and mechanical resistance. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Topsealer sealers\u003c\/strong\u003e, such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer#topsealer-wt-one-coat\"\u003eTopsealer WT One Coat\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eThe surface must be clean, dry, and free of grease. \u003c\/li\u003e\n\u003cli\u003eApply the appropriate primer: Primacem ABS for absorbent substrates, or Primacem Plus for non-absorbent ones. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eHomogenize the product. \u003c\/li\u003e\n\u003cli\u003eApply 1 or 2 coats with a flexible metal trowel. \u003c\/li\u003e\n\u003cli\u003eSand between coats (220 to 400 grit). \u003c\/li\u003e\n\u003cli\u003eProtect with 2 coats of \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer\u003c\/a\u003e varnish. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately 0.8 kg\/m² (in two coats).\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eParticle size\u003c\/strong\u003e: 0.125 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder density\u003c\/strong\u003e: 1.63 ± 0.02 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 100 – 120 Pa·s \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: \u003cstrong\u003e6 Kg\u003c\/strong\u003e container \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in a cool, dry place between 5ºC and 30ºC.\u003cbr\u003e Avoid direct exposure to sunlight.\u003cbr\u003e \u003cstrong\u003eShelf life\u003c\/strong\u003e: 1 year in closed, unopened container.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781652521341,"sku":"TT01212","price":87.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topciment-Cubo-Efectto-Small-Grain-6Kg_91_1_93.jpg?v=1776335050"},{"product_id":"efectto-quartz-super-grain-17kg","title":"Efectto Quartz Super Grain 17kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto Quartz Super Grain 17 kg\u003c\/strong\u003e is a ready-to-use high-end decorative microcement for floors, part of the Efectto Quartz line. Its superior grain size formulation allows it to be applied in a base layer of up to 1 mm, ideal for continuous flooring that requires decorative finishes with a natural texture. Perfect for residential and commercial projects where quick results and seamless finishes are desired, suitable for both interiors and exteriors.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eMain features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReady-to-use microcement with \"Super Grain\" (coarse grain) granulometry. \u003c\/li\u003e\n\u003cli\u003eMaximum thickness per coat: 1 mm, excellent adhesion. \u003c\/li\u003e\n\u003cli\u003eDensity: 1.6 ± 0.1 g\/cm³. \u003c\/li\u003e\n\u003cli\u003eHigh abrasion resistance (Taber value: 94 mg) and low water absorption. \u003c\/li\u003e\n\u003cli\u003eVery low VOC (16 g\/L), suitable for indoor and outdoor environments. \u003c\/li\u003e\n\u003cli\u003eSuitable for renovation over various substrates: concrete, ceramic, plaster, plasterboard, etc. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eInstructions for use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eLevel and consolidate the substrate, ensuring it is completely clean and free of dust or grease. \u003c\/li\u003e\n\u003cli\u003eApply appropriate primer according to the substrate: Primacem ABS on absorbent surfaces or Primacem PLUS on non-absorbent surfaces. Fill joints with Primacem Joint if applicable. \u003c\/li\u003e\n\u003cli\u003eHomogenize the product with a mechanical or manual stirrer before use. \u003c\/li\u003e\n\u003cli\u003eSpread the microcement with a polyester or polycarbonate trowel in a uniform layer of up to 1 mm. \u003c\/li\u003e\n\u003cli\u003eAllow to dry between coats for 4–8 h; apply two coats to ensure aesthetic continuity. \u003c\/li\u003e\n\u003cli\u003eSand with appropriate grit according to grain size before applying the final coat. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eYield\u003c\/h3\u003e\u003cp\u003eConsumption is approximately \u003cstrong\u003e1.30 kg\/m²\u003c\/strong\u003e, corresponding to a 1 mm thick layer, ensuring continuous coverage with minimal joints.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProduct type: ready-to-use decorative microcement \u003c\/li\u003e\n\u003cli\u003eGranulometry: Super Grain \u003c\/li\u003e\n\u003cli\u003eMaximum thickness per coat: 1 mm \u003c\/li\u003e\n\u003cli\u003eDensity: 1.6 ± 0.1 g\/cm³ \u003c\/li\u003e\n\u003cli\u003eVOC: ≤ 16 g\/L \u003c\/li\u003e\n\u003cli\u003eTaber Abrasion (CS17, 1000 g, 1000 c): 94 mg \u003c\/li\u003e\n\u003cli\u003e17 kg container\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eStorage conditions\u003c\/h3\u003e\u003cp\u003eStore the product in its original sealed container, in a dry, ventilated place protected from temperatures between 10 °C and 30 °C. Avoid direct exposure to sunlight or excessive heat. Estimated shelf life: one year under suitable conditions.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781652586877,"sku":"TT01213","price":210.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/efectto-super-grain_91_1_93.jpg?v=1776335053"},{"product_id":"efectto-quartz-super-grain-6kg","title":"Efectto Quartz Super Grain 6Kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto Quartz Super Grain\u003c\/strong\u003e is a ready-to-use microcement with a coarse aggregate that acts as a base coat within the continuous decorative system \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e. It is designed to create resistant, textured, and high-performance surfaces on floors and walls, especially in high-traffic areas.\u003c\/p\u003e\u003cp\u003eIts single-component paste formula eliminates mixing errors, reduces preparation time, and ensures consistent finishes. \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect application\u003c\/strong\u003e: no need to mix with water or resin. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.5 mm aggregate size\u003c\/strong\u003e: ideal as a textured base coat. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh adhesion\u003c\/strong\u003e to a wide variety of substrates. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of use\u003c\/strong\u003e: excellent workability with a steel trowel. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Topciment primers and sealers\u003c\/strong\u003e: such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/imprimaciones-y-promotores-de-adherencia-primacem#primacem-plus\"\u003ePrimacem Plus\u003c\/a\u003e and \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer#topsealer-wt-one-coat\"\u003eTopsealer WT One Coat\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eThe substrate must be clean, dry, consolidated, and free of dust or grease. \u003c\/li\u003e\n\u003cli\u003eApply the appropriate primer depending on the type of surface: \u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsorbent substrates\u003c\/strong\u003e: use Primacem ABS. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-absorbent substrates\u003c\/strong\u003e: use Primacem Plus. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal or glass surfaces\u003c\/strong\u003e: apply Primacem Grip. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct application\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eStir the contents of the container until a homogeneous paste is obtained. \u003c\/li\u003e\n\u003cli\u003eApply \u003cstrong\u003e2 coats\u003c\/strong\u003e of \u003cstrong\u003eEfectto Quartz Super Grain\u003c\/strong\u003e with a steel trowel, allowing at least \u003cstrong\u003e4 hours\u003c\/strong\u003e drying time between coats. \u003c\/li\u003e\n\u003cli\u003eSand with \u003cstrong\u003e24-40\u003c\/strong\u003e grit after each coat. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eAfter applying and sanding the Super Grain coats, apply the finishing microcement (such as Medium or Small Grain). \u003c\/li\u003e\n\u003cli\u003eFinish the system with \u003cstrong\u003e2 coats of varnish\u003c\/strong\u003e \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer#topsealer-wt-one-coat\"\u003eTopsealer WT One Coat\u003c\/a\u003e, allowing 24 hours to dry between each coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e1.80 kg\/m²\u003c\/strong\u003e (for two coats).\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggregate size\u003c\/strong\u003e: 0.5 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.61 ± 0.02 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 120 – 140 Pa·s \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 6 Kg \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry and ventilated place, protected from humidity. \u003c\/li\u003e\n\u003cli\u003eTemperature between 5 °C and 30 °C. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: up to \u003cstrong\u003e1 year\u003c\/strong\u003e in original sealed container.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781652849021,"sku":"TT01214","price":84.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topciment-Cubo-Efectto-Super-Grain-6Kg_91_1_93.jpg?v=1776335055"},{"product_id":"efectto-quartz-medium-grain-17kg","title":"Efectto Quartz Medium Grain 17kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto Quartz Medium Grain\u003c\/strong\u003e is a ready-to-use, single-component microcement paste, formulated for application as a finishing layer on floors and walls. Its medium grain size (0.25 mm) allows for a perfect balance between texture and smoothness to the touch, making it ideal for continuous decorative finishes indoors and outdoors.\u003c\/p\u003e\u003cp\u003eThanks to its excellent workability, it easily adapts to different substrates, providing mechanical resistance and durability. It is part of the \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e decorative system, a continuous, jointless coating with a modern and natural aesthetic.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect application\u003c\/strong\u003e: no mixing or additives, ready to use. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.25 mm grain size\u003c\/strong\u003e: provides a smooth and uniform finish. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood resistance to foot traffic and daily use.\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent workability\u003c\/strong\u003e: easy application with a metal trowel. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for indoor and outdoor use.\u003c\/strong\u003e \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eThe substrate must be clean, dry, free of dust, grease, or loose particles. \u003c\/li\u003e\n\u003cli\u003eApply the appropriate primer depending on the type of surface (absorbent or non-absorbent). \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct application\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eStir the contents of the container until a homogeneous paste is obtained. \u003c\/li\u003e\n\u003cli\u003eApply \u003cstrong\u003e2 coats\u003c\/strong\u003e of \u003cstrong\u003eEfectto Quartz Medium Grain\u003c\/strong\u003e with a flexible metal trowel, allowing a drying time of at least \u003cstrong\u003e4 hours\u003c\/strong\u003e between coats. \u003c\/li\u003e\n\u003cli\u003eSand with \u003cstrong\u003e100–120\u003c\/strong\u003e grit paper between coats to improve adhesion and smoothness of the finish. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal protection\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eOnce dry, it must be protected with polyurethane varnish (such as Topsealer WT One Coat), in 2 coats, to ensure impermeability and resistance. \u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e0.50 kg\/m²\u003c\/strong\u003e (for two coats).\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrain size\u003c\/strong\u003e: 0.25 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.63 ± 0.02 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 110 – 130 Pa·s \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 17 Kg \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in its original, tightly closed container, in a dry place and protected from moisture. \u003c\/li\u003e\n\u003cli\u003eRecommended temperature between 5 °C and 30 °C. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 1 year from its manufacturing date. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781652947325,"sku":"TT01215","price":225.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/efectto-medium-grain_91_1_93.jpg?v=1776335058"},{"product_id":"efectto-quartz-medium-grain-6kg","title":"Efectto Quartz Medium Grain 6Kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto Quartz Medium Grain\u003c\/strong\u003e is a one-component, ready-to-use microcement paste with medium-sized particles (0.25 mm), designed for continuous decorative finishes on interior and exterior surfaces. This ready-to-use coating eliminates the need for mixing, ensuring easy application and a uniform final result.\u003c\/p\u003e\u003cp\u003eIt is ideal as a finishing coat for floors and walls, providing a smooth finish with a perceptible texture, as well as high mechanical resistance. It is part of the Efectto Quartz system, aimed at professionals seeking high-quality, seamless aesthetic solutions.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect application\u003c\/strong\u003e without the need for mixing. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium particle size (0.25 mm)\u003c\/strong\u003e for uniform and resistant finishes. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility\u003c\/strong\u003e: suitable for interiors and exteriors. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to apply\u003c\/strong\u003e with a flexible metal trowel. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh performance\u003c\/strong\u003e with excellent workability. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eEnsure the surface is clean, dry, and free of dust or grease. \u003c\/li\u003e\n\u003cli\u003eApply an appropriate primer depending on the type of surface. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement application\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eStir the product until a homogeneous paste is obtained. \u003c\/li\u003e\n\u003cli\u003eApply 2 coats of Efectto Quartz Medium Grain with a flexible metal trowel. \u003c\/li\u003e\n\u003cli\u003eAllow a minimum drying time of 4 hours between coats. \u003c\/li\u003e\n\u003cli\u003eSand between coats with 100–120 grit sandpaper to smooth the surface. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing and protection\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eOnce dry, apply a polyurethane sealant in 2 coats to increase its water and wear resistance. \u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e0.50 kg\/m²\u003c\/strong\u003e (for two coats).\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eParticle size\u003c\/strong\u003e: 0.25 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.63 ± 0.02 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 110–130 Pa·s \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 6 Kg \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in its original closed container, in a dry and well-ventilated place. \u003c\/li\u003e\n\u003cli\u003eRecommended temperature between 5 °C and 30 °C. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 1 year from its manufacturing date.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653045629,"sku":"TT01216","price":89.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Topciment-Cubo-Efectto-Medium-Grain-6Kg_91_1_93.jpg?v=1776335061"},{"product_id":"efectto-quartz-big-grain-1-7kg","title":"Efectto Quartz Big Grain 1.7kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto Quartz Big Grain\u003c\/strong\u003e is a ready-to-use microcement with a coarse aggregate size (0.5 mm), designed for professionals seeking a distinctive texture and high mechanical resistance. This product, part of the \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e system, is used as a base coat in continuous decorative coatings, both indoors and outdoors.\u003c\/p\u003e\u003cp\u003eThanks to its single-component paste formulation, it requires no mixing, which reduces application times and dosing errors. It is ideal for high-traffic floors where a robust finish with greater thickness is desired.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse aggregate size (0.5 mm)\u003c\/strong\u003e: excellent filling capacity and texture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-use\u003c\/strong\u003e: paste microcement that requires no mixing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh adhesion\u003c\/strong\u003e: optimal grip on different prepared surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile\u003c\/strong\u003e: suitable for interiors and exteriors, floors and walls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistant and textured decorative finish\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure the surface is dry, clean, and free of dust or grease.\u003c\/li\u003e\n\u003cli\u003eApply an appropriate primer, such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/imprimaciones-y-promotores-de-adherencia-primacem\"\u003ePrimacem Plus\u003c\/a\u003e, depending on the substrate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrocement application\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eStir the product until a homogeneous paste is obtained.\u003c\/li\u003e\n\u003cli\u003eApply two coats of Efectto Quartz Big Grain with a flexible metal trowel.\u003c\/li\u003e\n\u003cli\u003eWait at least 4 hours between coats.\u003c\/li\u003e\n\u003cli\u003eSand between coats with 40-grit sandpaper to remove imperfections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing and protection\u003c\/strong\u003e\n\u003cul\u003e\u003cli\u003eOnce dry and sanded, apply \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT All in One\u003c\/a\u003e sealer in two coats to ensure protection against moisture and wear.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e0.70 kg\/m²\u003c\/strong\u003e for two coats.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggregate size\u003c\/strong\u003e: 0.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.63 ± 0.02 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 110–130 Pa·s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 1.7 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeep in its original closed container.\u003c\/li\u003e\n\u003cli\u003eTemperature between 5 °C and 30 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: up to 1 year from the manufacturing date.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653143933,"sku":"TT01217","price":28.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/microcemento-listo-al-uso-efectto-1-7kg_91_1_93.jpg?v=1776335063"},{"product_id":"efectto-quartz-small-grain-1-7kg","title":"Efectto Quartz Small Grain 1.7kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto Quartz Small Grain\u003c\/strong\u003e is a ready-to-use microcement with a fine grain size (0.125 mm), ideal for applying as a finishing coat on high-quality continuous coatings. This product belongs to the \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e system, formulated to facilitate its use without the need for mixing or catalysts, optimizing execution times.\u003c\/p\u003e\u003cp\u003eIts smooth texture provides a silky and elegant finish, perfect for interior spaces seeking a modern, continuous, and seamless aesthetic. Compatible with bases like \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto#efectto-quartz-big-grain\"\u003eBig Grain\u003c\/a\u003e, this finishing microcement guarantees high adhesion and great resistance to daily wear and tear.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine grain size (0.125 mm)\u003c\/strong\u003e: for smooth and elegant finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-use\u003c\/strong\u003e: paste microcement without the need for mixing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh workability\u003c\/strong\u003e: comfortable, uniform, and continuous application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood mechanical resistance\u003c\/strong\u003e: withstands regular traffic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Topsealer sealants\u003c\/strong\u003e for maximum protection.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply on a regularized base with products like \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto#efectto-quartz-big-grain\"\u003eEfectto Quartz Big Grain\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003ePrime the surface with \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/imprimaciones-y-promotores-de-adherencia-primacem\"\u003ePrimacem Plus\u003c\/a\u003e if necessary.\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eStir the contents of the container before use.\u003c\/li\u003e\n\u003cli\u003eApply 2 thin coats with a flexible metal trowel.\u003c\/li\u003e\n\u003cli\u003eAllow 4 hours to dry between coats.\u003c\/li\u003e\n\u003cli\u003eSand between coats with 220 grit.\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eSeal with two coats of \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT All in One\u003c\/a\u003e to protect the finish.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e0.30 kg\/m²\u003c\/strong\u003e for two coats.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrain size\u003c\/strong\u003e: 0.125 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.63 ± 0.02 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 110–130 Pa·s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 1.7 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\n\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\n\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKeep the original container tightly closed.\u003c\/li\u003e\n\u003cli\u003eTemperature between 5 °C and 30 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 1 year from the manufacturing date.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653242237,"sku":"TT01218","price":30.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/microcemento-listo-al-uso-efectto-1-7kg_91_1_93_0d641ae3-b6dc-4ad6-9310-99bf73710921.jpg?v=1776335066"},{"product_id":"efectto-quartz-super-grain-1-7kg","title":"Efectto Quartz Super Grain 1.7kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto Quartz Super Grain\u003c\/strong\u003e is a ready-to-use decorative microcement with a coarse aggregate size (0.5 mm), suitable for creating pronounced textures and rustic effects in continuous, seamless coatings. It is part of the \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e system, a range designed for professionals looking for fast application, without prior mixing, and maximum quality in both interior and exterior finishes.\u003c\/p\u003e\u003cp\u003eThanks to its large aggregate size, this product allows for surfaces with great aesthetic character and a high degree of slip resistance, ideal for floors in wet areas or outdoors. It is applied as a base coat before other Efectto products with smaller aggregate sizes.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse aggregate size (0.5 mm)\u003c\/strong\u003e: rustic and natural texture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh outdoor performance\u003c\/strong\u003e: ideal for terraces, patios, and wet areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves adhesion between layers\u003c\/strong\u003e: excellent base for Small or Medium Grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-use paste product\u003c\/strong\u003e: no mixing or additives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood mechanical resistance and dimensional stability\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThe surface must be clean, dry, and firm.\u003c\/li\u003e\n\u003cli\u003eApply a suitable primer such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/imprimaciones-y-promotores-de-adherencia-primacem\"\u003ePrimacem Plus\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct application\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eStir the contents until a homogeneous mixture is obtained.\u003c\/li\u003e\n\u003cli\u003eApply 1 or 2 coats of Efectto Quartz Super Grain with a metal trowel.\u003c\/li\u003e\n\u003cli\u003eAllow to dry for 4 hours between coats.\u003c\/li\u003e\n\u003cli\u003eSand with 40 or 80 grit after drying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eContinue with finishing coats such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto#efectto-quartz-medium-grain\"\u003eEfectto Quartz Medium Grain\u003c\/a\u003e or \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto#efectto-quartz-small-grain\"\u003eSmall Grain\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eSeal with two coats of \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT All in One\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e1.40 kg\/m²\u003c\/strong\u003e for two coats.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggregate size\u003c\/strong\u003e: 0.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.65 ± 0.02 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 110–130 Pa·s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 1.7 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a cool place between 5 °C and 30 °C.\u003c\/li\u003e\n\u003cli\u003eProtect from direct sunlight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 12 months in its original, sealed, and unopened container.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653275005,"sku":"TT01219","price":28.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/microcemento-listo-al-uso-efectto-1-7kg_91_1_93_223ebda7-13eb-4a9d-b99e-275df56c6728.jpg?v=1776335068"},{"product_id":"efectto-quartz-medium-grain-1-7kg","title":"Efectto Quartz Medium Grain 1.7kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto Quartz Medium Grain\u003c\/strong\u003e is a ready-to-use microcement with a medium particle size (0.25 mm), formulated for application as a finishing layer on horizontal and vertical surfaces. It belongs to the \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e decorative system, specially designed for professionals seeking a continuous, seamless finish, without the need for mixing or additional additives.\u003c\/p\u003e\u003cp\u003eThanks to its balanced texture and workability, it is perfect for creating uniform, resistant, and decorative surfaces. The final finish is slightly textured, ideal for interior floors and walls with high aesthetic and functional demands.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium particle size (0.25 mm)\u003c\/strong\u003e: balance between texture and smoothness. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy application\u003c\/strong\u003e: paste microcement, no prior mixing. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood workability\u003c\/strong\u003e: allows for high-quality continuous finishes. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical resistance\u003c\/strong\u003e: withstands traffic and daily use. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion\u003c\/strong\u003e: ideal as a finishing layer over \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto#efectto-quartz-big-grain\"\u003eBig Grain\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply on surfaces previously leveled with a base coat such as \u003cstrong\u003eEfectto Quartz Big Grain\u003c\/strong\u003e. \u003c\/li\u003e\n\u003cli\u003ePrime with \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/imprimaciones-y-promotores-de-adherencia-primacem\"\u003ePrimacem Plus\u003c\/a\u003e if the substrate requires it. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eStir the product well before use. \u003c\/li\u003e\n\u003cli\u003eApply 2 coats with a flexible metal trowel. \u003c\/li\u003e\n\u003cli\u003eAllow 4 hours of drying time between coats. \u003c\/li\u003e\n\u003cli\u003eSand between coats with 220 grit sandpaper for a finer finish. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eProtect the surface with two coats of \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT All in One\u003c\/a\u003e. \u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e0.50 kg\/m²\u003c\/strong\u003e for two coats.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eParticle size\u003c\/strong\u003e: 0.25 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.63 ± 0.02 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 110–130 Pa·s \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 1.7 Kg \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry and cool place, between 5 °C and 30 °C. \u003c\/li\u003e\n\u003cli\u003eKeep the container tightly closed. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 1 year from the manufacturing date under optimal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653373309,"sku":"TT01220","price":31.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/microcemento-listo-al-uso-efectto-1-7kg_91_1_93_16a1dd67-6779-4495-ba4e-00175c9f59da.jpg?v=1776335071"},{"product_id":"efectto-pu-big-grain-10kg","title":"Efectto PU Big Grain 10Kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto PU Big Grain\u003c\/strong\u003e is a ready-to-use paste microcement with coarse grit (0.4 mm), designed to provide a robust finish with great visual personality and excellent adhesion. This high-quality decorative coating is ideal for projects where texture and character are sought, both on interior and exterior surfaces.\u003c\/p\u003e\u003cp\u003eIt belongs to the \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e\u003c\/strong\u003e system, which stands out for its ease of application, excellent workability, and great durability. Its Portland cement-free formulation ensures greater dimensional stability and minimizes the risk of cracking.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoarse grain texture (0.4 mm)\u003c\/strong\u003e: more pronounced decorative effect. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy application\u003c\/strong\u003e: ready-to-use, no need for mixing or additives. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh adhesion\u003c\/strong\u003e: on multiple substrates such as mortar, microcement, plasterboard, or gypsum. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh resistance\u003c\/strong\u003e: suitable for high-traffic or exposed areas. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for rustic or industrial finishes\u003c\/strong\u003e: highly valued in contemporary interior design projects. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eEnsure the surface is clean, dry, and consolidated. \u003c\/li\u003e\n\u003cli\u003eApply an appropriate primer such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/imprimaciones-y-promotores-de-adherencia-primacem\"\u003ePrimacem ABS\u003c\/a\u003e, depending on the type of substrate. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication of Efectto PU Big Grain\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eStir the product well until homogeneous. \u003c\/li\u003e\n\u003cli\u003eApply 1 or 2 coats with a steel or rubber trowel. \u003c\/li\u003e\n\u003cli\u003eSand between coats with 24–40 grit depending on the desired effect. \u003c\/li\u003e\n\u003cli\u003eMinimum drying time between coats: 4 hours. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal sealing\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eProtect the surface with two coats of varnish such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT All in One\u003c\/a\u003e, which provides water and wear resistance. \u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e1.60 kg\/m²\u003c\/strong\u003e for two coats.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGranulometry\u003c\/strong\u003e: 0.4 mm \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.65 ± 0.02 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 110–130 Pa·s \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 10 Kg \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore between 5 ºC and 30 ºC in a dry environment. \u003c\/li\u003e\n\u003cli\u003eProtect from direct sunlight and frost. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: up to 12 months in original, unopened packaging. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653537149,"sku":"TT01224","price":140.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/EfecttoPUBigGrain10Kg.jpg?v=1776941061"},{"product_id":"efectto-pu-medium-grain-10kg","title":"Efectto PU Medium Grain 10kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto PU Medium Grain\u003c\/strong\u003e is a ready-to-use decorative paste microcement with a medium grain size (0.3 mm), ideal for achieving continuous finishes with a balanced texture between smoothness and character. Designed for both wall and floor applications, this seamless coating is perfect for quick renovation projects, requiring no mixing or additives.\u003c\/p\u003e\u003cp\u003eIt is part of the \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e\u003c\/strong\u003e system, a professional range developed to facilitate application and ensure excellent aesthetic and technical performance indoors and outdoors.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium grain size (0.3 mm)\u003c\/strong\u003e: fine finish with a slight texture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh coverage\u003c\/strong\u003e: excellent uniformity on vertical and horizontal surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-use product\u003c\/strong\u003e: no mixing required, reduces work time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with all substrates\u003c\/strong\u003e: microcement, cement, plaster, plasterboard, among others.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous coating\u003c\/strong\u003e: no joints or cuts, easy to maintain and clean.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eClean the surface, ensuring it is dry, firm, and free of grease or dust.\u003c\/li\u003e\n\u003cli\u003ePrime with the appropriate product according to the substrate, such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/imprimaciones-y-promotores-de-adherencia-primacem\"\u003ePrimacem Plus\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication of Efectto PU Medium Grain\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eStir the product well before use.\u003c\/li\u003e\n\u003cli\u003eApply one or two coats with a metal trowel.\u003c\/li\u003e\n\u003cli\u003eAllow a minimum of 4 hours to dry between coats.\u003c\/li\u003e\n\u003cli\u003eLightly sand between coats with 40 or 80 grit.\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing and sealing\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eTo protect the finish, apply two coats of sealing varnish such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT All in One\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e1.50 kg\/m²\u003c\/strong\u003e for two coats.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrain size\u003c\/strong\u003e: 0.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.65 ± 0.02 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 110–130 Pa·s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 10 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry, cool place, between 5 °C and 30 °C.\u003c\/li\u003e\n\u003cli\u003eAvoid direct sunlight or frost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: up to 12 months in its original unopened container.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653635453,"sku":"TT01225","price":132.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Efectto-PU-02-Medium-Grain.jpg?v=1776335073"},{"product_id":"efectto-pu-small-grain-10kg","title":"Efectto PU Small Grain 10Kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto PU Small Grain\u003c\/strong\u003e is a ready-to-use microcement paste with fine aggregate (0.125 mm), ideal for uniform and smooth-to-the-touch decorative finishes. This product is designed for professionals seeking precision, elegance, and practicality in application without sacrificing strength or durability.\u003c\/p\u003e\u003cp\u003eIt is part of the \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e\u003c\/strong\u003e system, a line of ready-to-use microcements known for their high dimensional stability, superior technical performance, and easy direct application.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-use microcement\u003c\/strong\u003e: no mixing or additives required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine aggregate (0.125 mm)\u003c\/strong\u003e: smooth and homogeneous texture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast and efficient application\u003c\/strong\u003e: ideal for projects with tight deadlines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion\u003c\/strong\u003e: suitable for substrates such as cement, plaster, plasterboard, or paints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-end decorative finish\u003c\/strong\u003e: perfect for interior walls.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eClean the surface and ensure it is dry and free of dust or grease.\u003c\/li\u003e\n\u003cli\u003eApply an appropriate primer such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/imprimaciones-y-promotores-de-adherencia-primacem\"\u003ePrimacem ABS\u003c\/a\u003e to ensure adhesion.\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication of Efectto PU Small Grain\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eStir the product well before use.\u003c\/li\u003e\n\u003cli\u003eApply 2 coats with a flexible steel or rubber trowel.\u003c\/li\u003e\n\u003cli\u003eSand between coats with fine-grit sandpaper (180–220) to smooth.\u003c\/li\u003e\n\u003cli\u003eMinimum drying time between coats: 4 hours.\u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection and sealing\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eApply two coats of protective varnish such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT All in One\u003c\/a\u003e to improve resistance to water, chemicals, and abrasion.\u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately \u003cstrong\u003e0.50 kg\/m²\u003c\/strong\u003e for two coats.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAggregate size\u003c\/strong\u003e: 0.125 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.60 ± 0.02 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 110–130 Pa·s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: 8 ± 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 10 Kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry, ventilated place, between 5 °C and 30 °C.\u003c\/li\u003e\n\u003cli\u003eAvoid direct sunlight and frost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: up to 12 months in original, unopened packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653668221,"sku":"TT01226","price":132.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Efectto-PU-01-Small-Grain.jpg?v=1776335076"},{"product_id":"efectto-pu-b-component-0-875kg","title":"Efectto PU B Component 0.875kg","description":"\u003cp\u003e\u003cstrong\u003eEfectto PU B Component\u003c\/strong\u003e is the two-component aliphatic polyurethane hardener that combines with the ready-to-use microcements from the \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-listo-al-uso-efectto\"\u003eEfectto Quartz\u003c\/a\u003e\u003c\/strong\u003e range. Designed to significantly improve the mechanical and chemical performance of the system, this B component is mixed with component A to obtain a more resistant, stable, and durable coating.\u003c\/p\u003e\u003cp\u003eIt is essential for achieving optimal adhesion, reducing water absorption, and increasing wear resistance, offering a professional finish on all types of decorative surfaces.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-performance catalyst\u003c\/strong\u003e: essential in the two-component formulation of the Efectto PU system. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves resistance\u003c\/strong\u003e: increases the hardness, impermeability, and durability of the coating. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensional stability\u003c\/strong\u003e: reduces shrinkage during drying. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with the entire PU range\u003c\/strong\u003e: Small, Medium, Big, and Super Grain. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy dosing and precise mixing\u003c\/strong\u003e: formulated for professional use. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eStir the microcement component A (PU) until a homogeneous mixture is obtained. \u003c\/li\u003e\n\u003cli\u003eAdd the \u003cstrong\u003eEfectto PU B Component\u003c\/strong\u003e in a 10:1 ratio (A:B) and mix for 2 minutes with a low-speed mixer. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply the product in two coats on a prepared and primed substrate. \u003c\/li\u003e\n\u003cli\u003eSand between coats if necessary. \u003c\/li\u003e\n\u003cli\u003eFinish the system by sealing with varnishes such as \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT All in One\u003c\/a\u003e. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eIt will depend on the consumption of component A and the mixing ratio. For a 10 kg container of Efectto PU, 0.875 kg of this B component is used.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance\u003c\/strong\u003e: Translucent liquid \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 100–120 mPa·s \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity\u003c\/strong\u003e: 1.02 ± 0.02 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio\u003c\/strong\u003e: 10:1 with component A \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 0.875 kg \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in its original closed container. \u003c\/li\u003e\n\u003cli\u003eDry and ventilated place, between 10 °C and 30 °C. \u003c\/li\u003e\n\u003cli\u003eAvoid direct exposure to sunlight and heat sources. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 6 months. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653766525,"sku":"TT01227","price":140.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/EfecttoPUBComponent0.875Kg.jpg?v=1776941180"},{"product_id":"componente-a-industtrial-xl-18-kg","title":"Component A Industtrial XL 18 Kg","description":"\u003cp\u003e\u003cstrong\u003eComponent A Industtrial XL\u003c\/strong\u003e is a two-component epoxy microcement with a coarse aggregate size, developed for application in high-traffic indoor areas such as industrial warehouses, garages, offices, or commercial zones. It is part of the \u003cstrong\u003eIndusttrial\u003c\/strong\u003e system, a decorative solution known for its high hardness, chemical, and mechanical resistance, ideal for pavements requiring maximum robustness.\u003c\/p\u003e\u003cp\u003eThis microcement offers a continuous, seamless finish with a modern mineral aesthetic. It is mixed with component B (water-based epoxy resin) to obtain a high-performance mortar that is easy to apply on stable substrates such as cement or self-leveling compounds.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh wear and compression resistance\u003c\/strong\u003e: ideal for industrial and commercial areas. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural mineral finish\u003c\/strong\u003e: with a robust texture and contemporary aesthetic. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion\u003c\/strong\u003e: on cementitious substrates, mortars, self-leveling compounds, and concrete. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy workability\u003c\/strong\u003e: prolonged mixing time and creamy consistency. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXL aggregate size\u003c\/strong\u003e: for base applications that require more body or substrate correction. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eIt must be clean, dry, stable, free of dust, grease, or loose particles. \u003c\/li\u003e\n\u003cli\u003eApply an appropriate primer such as \u003cstrong\u003ePrimapox® 100 Barrier\u003c\/strong\u003e or \u003cstrong\u003ePrimacem PLUS\u003c\/strong\u003e depending on the substrate. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct mixing\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eAdd \u003cstrong\u003ecomponent B\u003c\/strong\u003e (epoxy resin) to \u003cstrong\u003ecomponent A Industtrial XL\u003c\/strong\u003e in a 4:1 ratio and mix for at least 2 minutes with an electric mixer at low revolutions until a homogeneous mass is obtained. \u003c\/li\u003e\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply 1 or 2 coats of \u003cstrong\u003eIndusttrial XL\u003c\/strong\u003e as a base microcement on the primed substrate. \u003c\/li\u003e\n\u003cli\u003eSubsequently, apply two coats of the finishing microcement: \u003cstrong\u003eIndusttrial Medium\u003c\/strong\u003e, \u003cstrong\u003eIndusttrial Fine\u003c\/strong\u003e, or \u003cstrong\u003eIndusttrial Extra Fine\u003c\/strong\u003e, depending on the desired finish. \u003c\/li\u003e\n\u003cli\u003eSand between coats to ensure better adhesion. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eOnce dry, protect with two coats of \u003cstrong\u003eTopsealer WT 100\u003c\/strong\u003e or \u003cstrong\u003eTopsealer DSV\u003c\/strong\u003e varnish, depending on the required level of protection. \u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2 coats of \u003cstrong\u003eIndusttrial XL\u003c\/strong\u003e: approx. 2.2 kg\/m² \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 18 Kg \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition\u003c\/strong\u003e: Mineral components + additives + pigments \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio A\/B\u003c\/strong\u003e: 4:1 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity (A)\u003c\/strong\u003e: 1.65 ± 0.05 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life\u003c\/strong\u003e: approx. 60 minutes \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature\u003c\/strong\u003e: Between 10 °C and 30 °C \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying times\u003c\/strong\u003e: \u003cul\u003e\n\u003cli\u003eRecoating: 8-12 hours \u003c\/li\u003e\n\u003cli\u003eFull curing: 7 days \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry and ventilated place, between 10 °C and 30 °C. \u003c\/li\u003e\n\u003cli\u003eProtect from humidity and direct sunlight. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 1 year from the manufacturing date in an unopened container.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653832061,"sku":"TT01400","price":164.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Industtrial-XL-A-18Kg.jpg?v=1776336150"},{"product_id":"componente-a-industtrial-base-18-kg","title":"Component A Industtrial BASE 18 Kg","description":"\u003cp\u003e\u003cstrong\u003eComponente A Industtrial BASE\u003c\/strong\u003e is part of the two-component epoxy system \u003cstrong\u003eIndusttrial\u003c\/strong\u003e, designed for high-performance interior coatings. Its medium particle size makes it a versatile option as a base coat for decorative and functional applications in medium-high traffic areas such as offices, commercial premises, or homes.\u003c\/p\u003e\u003cp\u003eThis epoxy microcement stands out for its hardness, superior adhesion, and uniform finish. Its specific formulation allows for easy application on suitable substrates, combining with component B (water-based epoxy resin) to obtain a resistant, continuous, and durable coating.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical and chemical resistance\u003c\/strong\u003e, ideal for demanding interiors. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion to the substrate\u003c\/strong\u003e, no need for mesh. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium particle size\u003c\/strong\u003e, ideal as an intermediate layer between XL and finishes. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent workability\u003c\/strong\u003e, easy to apply and sand. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with fine finishes\u003c\/strong\u003e, such as Industtrial Fino. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eIt must be clean, dry, free of grease, dust, or poorly adhered residues. \u003c\/li\u003e\n\u003cli\u003ePrime with Primapox® 100 Barrier or Primacem Plus depending on the type of surface. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct mixing\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eAdd \u003cstrong\u003ecomponent B\u003c\/strong\u003e (epoxy resin) to \u003cstrong\u003ecomponent A Industtrial BASE\u003c\/strong\u003e in a 4:1 ratio and mix for 2 minutes until a uniform mass is obtained. \u003c\/li\u003e\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e \u003cul\u003e\n\u003cli\u003eApply 1 or 2 coats of \u003cstrong\u003eIndusttrial BASE\u003c\/strong\u003e as a base coat. \u003c\/li\u003e\n\u003cli\u003eOnce dry, apply two coats of finishing microcement: Industtrial Medio, Fino or Extra Fino, depending on the desired decorative effect. \u003c\/li\u003e\n\u003cli\u003eSand between coats with 40-80 grit sandpaper. \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e \u003cul\u003e\u003cli\u003eProtect with two coats of Topsealer WT 100 or Topsealer DSV. \u003c\/li\u003e\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2 coats: approx. 1.7 kg\/m² \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 18 Kg \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposition\u003c\/strong\u003e: Mineral components + additives + pigments \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio A\/B\u003c\/strong\u003e: 4:1 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity (A)\u003c\/strong\u003e: 1.65 ± 0.05 g\/cm³ \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life\u003c\/strong\u003e: approx. 60 minutes \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature\u003c\/strong\u003e: Between 10 ºC and 30 ºC \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoating time\u003c\/strong\u003e: 8-12 hours \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure\u003c\/strong\u003e: 7 days \u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in its original sealed container, in a cool and dry place between 10 ºC and 30 ºC. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 12 months from the date of manufacture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653930365,"sku":"TT01401","price":164.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Industtrial-Base-A-18Kg.jpg?v=1776336153"},{"product_id":"componente-a-industtrial-medio-18-kg","title":"Component A Industtrial MEDIUM 18 Kg","description":"\u003cp\u003e\u003cstrong\u003eComponent A Industtrial MEDIUM\u003c\/strong\u003e is part of the two-component epoxy system \u003cstrong\u003eIndusttrial\u003c\/strong\u003e, developed by Topciment® for high-performance indoor applications. It is an epoxy microcement with medium-fine aggregate, ideal as a finish coat when high mechanical resistance and a smoother finish than that of BASE are required.\u003c\/p\u003e\u003cp\u003eThis product is suitable for floors and walls in demanding environments such as offices, homes, commercial premises, or medium-high traffic areas. It offers a balance between resistance, ease of application, and modern aesthetics.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical and chemical resistance\u003c\/strong\u003e, superior to other traditional microcements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication without the need for mesh\u003c\/strong\u003e, with excellent adhesion to multiple substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiner finish than BASE\u003c\/strong\u003e, ideal for technical and decorative finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with primers such as Primacem Plus\u003c\/strong\u003e or Primapox® 100 Barrier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable system\u003c\/strong\u003e, combinable with the Fine and Extra Fine finishes of the \u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-epoxi-para-pavimento-continuo-interior-industtrial#que-es-atlanttic\"\u003eIndusttria\u003c\/a\u003el system\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eEnsure that the surface is clean, dry, and free of dirt, grease, or loose particles.\u003c\/li\u003e\n\u003cli\u003eApply the appropriate primer according to the substrate (e.g., Primacem Plus or Primapox® 100 Barrier).\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct mixing\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMix 4 parts of \u003cstrong\u003eComponent A Industtrial MEDIUM\u003c\/strong\u003e with 1 part of \u003cstrong\u003eComponent B (epoxy resin)\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eStir at low speed with a mechanical mixer for 2 minutes until a homogeneous mixture is obtained.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eApply in 1 or 2 coats with a metal trowel over a base previously prepared with Industtrial BASE or XL.\u003c\/li\u003e\n\u003cli\u003eAllow to dry between coats for 8–12 hours. Sand with 80–120 grit before applying the final coat or sealer.\u003c\/li\u003e\n\u003cli\u003eFor a finer decorative finish, Industtrial Fine or Extra Fine can then be applied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection and sealing\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eApply 2 coats of the appropriate sealer: \u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer#topsealerwt100\"\u003eTopsealer WT 100\u003c\/a\u003e for maximum water and chemical resistance.\u003c\/li\u003e\n\u003cli\u003eTopsealer DSV for solvent-based finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately \u003cstrong\u003e1.40 kg\/m²\u003c\/strong\u003e in 2 coats.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 18 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA\/B mixing ratio\u003c\/strong\u003e: 4:1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity (A)\u003c\/strong\u003e: 1.65 ± 0.05 g\/cm³.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life\u003c\/strong\u003e: 60 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication conditions\u003c\/strong\u003e: Between 10 ºC and 30 ºC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime between coats\u003c\/strong\u003e: 8–12 h.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal curing\u003c\/strong\u003e: 7 days.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry and ventilated place, between 10 ºC and 30 ºC.\u003c\/li\u003e\n\u003cli\u003eAvoid direct sunlight and humidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life\u003c\/strong\u003e: 12 months in original unopened container.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781653995901,"sku":"TT01402","price":164.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Industtrial-Medio-A-18Kg.jpg?v=1776336155"},{"product_id":"componente-a-industtrial-liso-18-kg","title":"Component A Industtrial SMOOTH 18 Kg","description":"\u003cp\u003e\u003cstrong\u003eIndusttrial LISO\u003c\/strong\u003e is a fine-grain, two-component epoxy microcement developed by \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\"\u003eTopciment\u003c\/a\u003e\u003c\/strong\u003e for application as a finishing coat on interior surfaces. Its extremely smooth texture allows for elegant and continuous finishes, without joints, ideal for floors and walls in homes, commercial premises, offices or industrial areas with high technical and aesthetic demands.\u003c\/p\u003e\u003cp\u003eThis decorative microcement offers excellent mechanical and chemical resistance, making it ideal for high-traffic areas or those exposed to intensive use. Thanks to its epoxy base, it provides high adhesion to substrates such as concrete, cement mortar, ceramics or surfaces previously treated with other epoxies. It must always be applied with a sealer to ensure its durability and resistance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eTwo-component epoxy microcement with a fine and smooth finish. \u003c\/li\u003e\n\u003cli\u003eFor interior application on floors or walls only. \u003c\/li\u003e\n\u003cli\u003eHigh resistance to chemicals, abrasion and heavy traffic. \u003c\/li\u003e\n\u003cli\u003eNo mesh required for application. \u003c\/li\u003e\n\u003cli\u003eRequires sealing with \u003cstrong\u003eTopsealer WT All in One\u003c\/strong\u003e or \u003cstrong\u003eTopsealer WT Dragon\u003c\/strong\u003e for complete protection. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e\u003cbr\u003e Ensure the surface is clean, dry, firm, and free of dust, grease or contaminants. It is recommended to apply an appropriate primer such as \u003cstrong\u003ePrimacem Plus\u003c\/strong\u003e or \u003cstrong\u003ePrimapox® 100 Barrier\u003c\/strong\u003e, depending on the type of substrate. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e\u003cbr\u003e Mix Component A with Component B in a 4:1 ratio by weight. Stir with a mechanical stirrer at low revolutions until a homogeneous mixture is achieved. Let it rest for a few minutes. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003e Apply one or two coats of the product with a flexible metal trowel. Between coats, sand lightly if necessary (grit 80). Allow to dry for 8 to 12 hours depending on environmental conditions. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e\u003cbr\u003e Once cured, apply a protective coat of \u003cstrong\u003eTopsealer WT All in One\u003c\/strong\u003e or \u003cstrong\u003eTopsealer WT Dragon\u003c\/strong\u003e to ensure water, chemical and wear resistance. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApprox. 0.60 kg\/m² per coat. \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFormat: 18 kg \u003c\/li\u003e\n\u003cli\u003eMixing ratio A:B: 4:1 by weight \u003c\/li\u003e\n\u003cli\u003eDensity Component A: 1.55 ± 0.02 g\/cm³ \u003c\/li\u003e\n\u003cli\u003ePot life of mixture: 60 minutes \u003c\/li\u003e\n\u003cli\u003eTime between coats: 8–12 hours \u003c\/li\u003e\n\u003cli\u003eTotal curing: 7 days \u003c\/li\u003e\n\u003cli\u003eApplication temperature: between 10 ºC and 30 ºC \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in original sealed container in a dry place, protected from humidity and extreme temperatures. \u003c\/li\u003e\n\u003cli\u003eShelf life: 12 months from manufacturing date. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781654061437,"sku":"TT01403","price":164.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Industtrial-Liso-A-18Kg.jpg?v=1776336158"},{"product_id":"componente-a-industtrial-xl-4-5-kg","title":"Component A Industtrial XL 4,5 Kg","description":"\u003cp\u003eComponent A Industtrial XL is a coarse-grain, two-component epoxy microcement designed for use as a first coat in interior flooring systems. It stands out for its excellent adhesion, superior mechanical resistance, and ease of application without the need for mesh. It is especially suitable for demanding environments such as industrial, commercial, and residential areas with high traffic.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eHigh resistance to abrasion and wear. \u003c\/li\u003e\n\u003cli\u003eApplication without the need for reinforcing mesh. \u003c\/li\u003e\n\u003cli\u003eDirect adhesion to multiple substrates with the appropriate primer. \u003c\/li\u003e\n\u003cli\u003eRough finish, ideal as a base coat for Industtrial systems. \u003c\/li\u003e\n\u003cli\u003eTwo-component product that allows for controlled drying and stable curing. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e\u003cbr\u003e The substrate must be clean, dry, firm, and free of contaminants. Apply the corresponding primer according to the type of surface (such as Primacem Plus or Primapox® 100 Barrier). \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct mixing\u003c\/strong\u003e\u003cbr\u003e Mix 4 parts by weight of Component A Industtrial XL with 1 part of Component B. Homogenize with a mechanical stirrer for 2 minutes at low speed until a uniform mixture is obtained. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e Apply with a metal trowel in 1 or 2 coats, respecting the drying times between them (8–12 hours). Sand between coats with 40-80 grit. Do not apply at temperatures below 10 ºC or above 30 ºC. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing\u003c\/strong\u003e\u003cbr\u003e After applying XL, it is recommended to continue the system with layers of Industtrial BASE, MEDIO, FINO, or EXTRA FINO, depending on the desired finish. Finish with the recommended Topsealer sealant to increase durability and chemical resistance. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApprox. 1.40 kg\/m² per coat (in 2 coats). \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFormat: 4.5 Kg \u003c\/li\u003e\n\u003cli\u003eMixing ratio (A:B): 4:1 \u003c\/li\u003e\n\u003cli\u003eDensity component A: 1.65 ± 0.05 g\/cm³ \u003c\/li\u003e\n\u003cli\u003ePot life: 60 minutes \u003c\/li\u003e\n\u003cli\u003eTime between coats: 8–12 hours \u003c\/li\u003e\n\u003cli\u003eFull cure: 7 days \u003c\/li\u003e\n\u003cli\u003eApplication temperature: 10 ºC – 30 ºC \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry, cool place, protected from direct sunlight. \u003c\/li\u003e\n\u003cli\u003eIdeal storage temperature: between 10 ºC and 30 ºC. \u003c\/li\u003e\n\u003cli\u003eShelf life: 12 months in unopened original packaging. \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781654126973,"sku":"TT01405","price":41.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Industtrial-XL-46.jpg?v=1776336163"},{"product_id":"componente-a-industtrial-base-4-5-kg","title":"Component A Industtrial BASE 4,5 Kg","description":"\u003cp\u003eIndusttrial BASE is a two-component epoxy microcement, indicated as an intermediate layer in high-performance continuous coating systems for interiors. Its formulation is designed to provide body and resistance to the \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-epoxi-para-pavimento-continuo-interior-industtrial#que-es-atlanttic\"\u003eIndusttrial\u003c\/a\u003e\u003c\/strong\u003e system before applying finishing layers such as \u003cstrong\u003eIndusttrial MEDIO\u003c\/strong\u003e, \u003cstrong\u003eFINO\u003c\/strong\u003e, or \u003cstrong\u003eEXTRA FINO\u003c\/strong\u003e. It is characterized by its excellent adhesion, chemical resistance, and application capacity without the need for mesh, ideal for industrial floors, garages, warehouses, healthcare areas, or commercial areas with heavy traffic.\u003c\/p\u003e\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eTwo-component epoxy microcement for professional use.\u003c\/li\u003e\n\u003cli\u003eHigh mechanical resistance and durability.\u003c\/li\u003e\n\u003cli\u003eDirect application on primed substrate without the need for mesh.\u003c\/li\u003e\n\u003cli\u003eTextured finish that favors the adhesion of subsequent layers.\u003c\/li\u003e\n\u003cli\u003eCompatible with sealing systems such as \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT All in One\u003c\/a\u003e\u003c\/strong\u003e or \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer#topsealer-wt-dragon\"\u003eTopsealer WT Dragon\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e\u003cbr\u003e Ensure the surface is clean, dry, and free of dust, grease, or moisture. Apply an appropriate primer such as \u003cstrong\u003ePrimacem Plus\u003c\/strong\u003e or \u003cstrong\u003ePrimapox® 100 Barrier\u003c\/strong\u003e, depending on the type of surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct mixing\u003c\/strong\u003e\u003cbr\u003e Mix 4 parts by weight of \u003cstrong\u003eComponent A\u003c\/strong\u003e with 1 part of \u003cstrong\u003eComponent B\u003c\/strong\u003e of the Industtrial system. Stir with a mechanical stirrer at low speed until a homogeneous mixture is obtained (approximately 2 minutes).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e Apply with a metal trowel in 1 or 2 layers over \u003cstrong\u003eIndusttrial XL\u003c\/strong\u003e or directly over a primed substrate. Lightly sand with 40–80 grit between layers. Respect the drying time between layers (8–12 h).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinishing\u003c\/strong\u003e\u003cbr\u003e After applying BASE, continue with a layer of \u003cstrong\u003eIndusttrial MEDIO\u003c\/strong\u003e, \u003cstrong\u003eFINO\u003c\/strong\u003e, or \u003cstrong\u003eEXTRA FINO\u003c\/strong\u003e, depending on the desired finish, and seal with the corresponding varnish.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately 0.90 kg\/m² per coat.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFormat: 4.5 kg\u003c\/li\u003e\n\u003cli\u003eMixing ratio (A:B): 4:1\u003c\/li\u003e\n\u003cli\u003eDensity of component A: 1.60 ± 0.02 g\/cm³\u003c\/li\u003e\n\u003cli\u003ePot life: 60 minutes\u003c\/li\u003e\n\u003cli\u003eTime between coats: 8–12 hours\u003c\/li\u003e\n\u003cli\u003eFull cure: 7 days\u003c\/li\u003e\n\u003cli\u003eApplication temperature: 10–30 ºC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a dry, cool place, between 10 ºC and 30 ºC.\u003c\/li\u003e\n\u003cli\u003eKeep the product in its original closed and unopened container.\u003c\/li\u003e\n\u003cli\u003eShelf life: up to 12 months.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781654225277,"sku":"TT01406","price":41.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Industtrial-Base-46.jpg?v=1776336165"},{"product_id":"componente-a-industtrial-medio-4-5-kg","title":"Component A Industtrial MEDIUM 4,5 Kg","description":"\u003cp\u003e\u003cstrong\u003eIndusttrial MEDIO\u003c\/strong\u003e is the medium-grain epoxy microcement in the \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-epoxi-para-pavimento-continuo-interior-industtrial#que-es-atlanttic\"\u003eIndusttrial\u003c\/a\u003e\u003c\/strong\u003e system, ideal as a finish coat for continuous interior surfaces with high traffic. Thanks to its chemical and mechanical resistance, it is specially designed for industrial, sanitary, and commercial environments, offering a finish with a medium texture and great durability. This product, formulated as a two-component system, provides a continuous, jointless coating with high adhesion, compatible with multiple surfaces such as concrete, mortars, ceramics, and epoxy substrates.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eTwo-component, medium-grain epoxy microcement, suitable as a finish.\u003c\/li\u003e\n\u003cli\u003eExcellent wear and chemical resistance.\u003c\/li\u003e\n\u003cli\u003eApplication without the need for mesh, over epoxy primers or mortars.\u003c\/li\u003e\n\u003cli\u003eTextured finish, suitable for high-traffic areas.\u003c\/li\u003e\n\u003cli\u003eCompatible with varnishes such as \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/barniz-poliuretano-acrilico-alagua-microcemento-topsealer\"\u003eTopsealer WT All in One\u003c\/a\u003e\u003c\/strong\u003e or \u003cstrong\u003eTopsealer WT Dragon\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for Use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate Preparation\u003c\/strong\u003e\u003cbr\u003e Ensure the surface is dry, clean, and free of dust or grease. Prime beforehand with \u003cstrong\u003ePrimacem Plus\u003c\/strong\u003e or \u003cstrong\u003ePrimapox® 100 Barrier\u003c\/strong\u003e, depending on the type of substrate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Mixing\u003c\/strong\u003e\u003cbr\u003e Mix 4 parts by weight of \u003cstrong\u003eIndusttrial MEDIO Component A\u003c\/strong\u003e with 1 part of the corresponding Component B. Stir for 2 minutes with a mechanical mixer at low speed until a homogeneous mixture is obtained.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003e Apply in 1 or 2 coats over \u003cstrong\u003eIndusttrial BASE\u003c\/strong\u003e or directly onto a primed substrate. Use a metal trowel. Sand between coats with 80-grit if necessary. The waiting time between coats is 8 to 12 hours, depending on temperature and ventilation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e\u003cbr\u003e To ensure impermeability and chemical resistance, finish with \u003cstrong\u003eTopsealer WT All in One\u003c\/strong\u003e or \u003cstrong\u003eTopsealer WT Dragon\u003c\/strong\u003e, applied according to the technical data sheet of the chosen varnish.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eApproximately 0.70 kg\/m² per coat.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFormat: 4.5 kg\u003c\/li\u003e\n\u003cli\u003eMixing ratio (A:B): 4:1\u003c\/li\u003e\n\u003cli\u003eDensity of component A: 1.55 ± 0.02 g\/cm³\u003c\/li\u003e\n\u003cli\u003ePot life of the mixture: 60 minutes\u003c\/li\u003e\n\u003cli\u003eTime between coats: 8–12 hours\u003c\/li\u003e\n\u003cli\u003eFull cure: 7 days\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eApplication temperature: between 10 ºC and 30 ºC\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore the product in its original closed container, in a dry and cool place (10–30 ºC).\u003c\/li\u003e\n\u003cli\u003eDo not expose to direct sunlight or heat sources.\u003c\/li\u003e\n\u003cli\u003eShelf life: up to 12 months.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781654356349,"sku":"TT01407","price":41.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Industtrial-Medio-46.jpg?v=1776336168"},{"product_id":"componente-a-industtrial-liso-4-5-kg","title":"Component A Industtrial SMOOTH 4,5 Kg","description":"\u003cp\u003eThe \u003cstrong\u003eIndusttrial Smooth Component A 4.5 kg\u003c\/strong\u003e is the base epoxy resin of the Industtrial system, a highly resistant decorative epoxy coating designed for application on interior walls. Its smooth finish and high adhesion make it ideal for professional decorative epoxy microcement systems with customizable shades through pigmentation.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eMain features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh adhesion on substrates such as concrete or tile, even without additional primer.\u003c\/li\u003e\n\u003cli\u003eExcellent coverage (up to 3-4 times more than conventional microcements), with only one final coat.\u003c\/li\u003e\n\u003cli\u003eSmooth finish with no visible joints, modifiable with aggregate or custom pigmentation.\u003c\/li\u003e\n\u003cli\u003eResistant to abrasion, chemicals such as ammonia, and constant pedestrian traffic.\u003c\/li\u003e\n\u003cli\u003eHighly workable: allows immediate retouching for minor imperfections.\u003c\/li\u003e\n\u003cli\u003eEnsures durability in indoor environments such as garages, offices, or commercial premises.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eMixing ratios with component B\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe official mixing ratio is \u003cstrong\u003e100 parts of component A to 11.6 parts of component B\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eThis translates to an approximate proportion of \u003cstrong\u003e8.6% by weight of component B over the total\u003c\/strong\u003e mixture, complying with the technical indications of the product data sheet.\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstructions for use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eHomogenize component A by mechanical stirring at low speed until a homogeneous mixture is obtained.\u003c\/li\u003e\n\u003cli\u003eIf pigmentation is required, incorporate it before or after adding component B, depending on the chosen system.\u003c\/li\u003e\n\u003cli\u003eAdd component B respecting the indicated proportion (100 A : 11.6 B) and mix at low revolutions.\u003c\/li\u003e\n\u003cli\u003eApply on a clean, level, dust-free and grease-free substrate in a thin layer with a polyester or polycarbonate trowel.\u003c\/li\u003e\n\u003cli\u003eThe mixture has an approximate \u003cstrong\u003epot life of 60 min at 20 °C\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAllow to dry between each coat for \u003cstrong\u003e8–12 h\u003c\/strong\u003e, depending on environmental conditions.\u003c\/li\u003e\n\u003cli\u003eFinal curing is reached between \u003cstrong\u003e7 and 14 days\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003ePerformance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApplying the complete system (bases + final coat), consumption is estimated at \u003cstrong\u003e0.55 kg\/m² per coat\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eA minimum standard proportion for the system would be to use \u003cstrong\u003e4 kg of A + 0.46 kg of B\u003c\/strong\u003e to cover approximately 7–8 m² with a single coat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEpoxy base formulated with cycloaliphatic amine adducts.\u003c\/li\u003e\n\u003cli\u003eTotal solids: \u003cstrong\u003e82 ± 2%\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eDensity: \u003cstrong\u003e1.65 ± 0.02 g\/mL\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eViscosity: \u003cstrong\u003e45-65 Pa·s\u003c\/strong\u003e at 25 °C.\u003c\/li\u003e\n\u003cli\u003eApproximate pH: \u003cstrong\u003e9.5\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e4.5 kg\u003c\/strong\u003e container, ideal for test work or small applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eStorage conditions\u003c\/h3\u003e\u003cp\u003eStore in the original sealed container, in a dry and ventilated place, at temperatures between \u003cstrong\u003e15 °C and 30 °C\u003c\/strong\u003e. Do not expose to direct light or humidity. Estimated shelf life: \u003cstrong\u003e1 year\u003c\/strong\u003e if stored correctly.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781654520189,"sku":"TT01408","price":41.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Industtrial-Liso-46.jpg?v=1776336170"},{"product_id":"componente-b-industtrial-0-52kg-lq-adr","title":"Component B Industtrial 0,52Kg LQ ADR","description":"\u003cp\u003eThe \u003cstrong\u003eIndusttrial Component B 0.52kg LQ ADR\u003c\/strong\u003e is the liquid epoxy hardener for the Industtrial system, formulated to provide maximum mechanical resistance, impermeability, and hardness to the coating, even in high-traffic indoor environments. Compatible with the Smooth-grade Component A, it allows for continuous, aesthetic, and durable decorative finishes with a water-based mix.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWater-based epoxy hardener with 100% solids.\u003c\/li\u003e\n\n\u003cli\u003eLow viscosity (approx. 8–10 Pa·s), facilitating a homogeneous mix with Component A.\u003c\/li\u003e\n\n\u003cli\u003eApproximate density of 1.16 g\/mL at 25 °C.\u003c\/li\u003e\n\n\u003cli\u003eProvides resistance to abrasion, common chemical agents, and high pedestrian traffic.\u003c\/li\u003e\n\n\u003cli\u003e0.52 kg format ideal for combining with 7.8 kg of Component A for precise and controlled applications.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eMixing proportions with Component A\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eFor 7.8 kg of Industtrial Smooth Component A, add \u003cstrong\u003e0.52 kg of Component B\u003c\/strong\u003e\u003cspan\u003e, according to the official proportion indicated in the technical data sheet.\u003c\/span\u003e\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003eThis proportion ensures a balanced mix with high solids content and optimized mechanical performance.\u003c\/li\u003e\n\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003col\u003e\n\n\u003cli\u003ePour Component A first and then gradually incorporate Component B in the indicated proportion.\u003c\/li\u003e\n\n\u003cli\u003eMix slowly at low speed until a uniform consistency is obtained.\u003c\/li\u003e\n\n\u003cli\u003eApply to a clean, prepared substrate using a polyester or steel trowel.\u003c\/li\u003e\n\n\u003cli\u003eRespect the \u003cstrong\u003epot life (~60 min at 20 °C)\u003c\/strong\u003e to avoid incomplete work sessions.\u003c\/li\u003e\n\n\u003cli\u003eFollow the layer system according to the Industtrial protocol (dry between layers 8–12 h; full cure 7‑14 days).\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eWith the complete system (comp. A + B) in Smooth grade, the approximate consumption is \u003cstrong\u003e0.45 kg\/m² per layer\u003c\/strong\u003e on indoor wall finishes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: water-based epoxy hardener (100% solids).\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eViscosity\u003c\/strong\u003e: 8 – 10 Pa·s at 25 °C.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDensity\u003c\/strong\u003e: ≈ 1.16 g\/mL at 25 °C.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePot life\u003c\/strong\u003e: ~60 min at 20 °C.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eFull cure\u003c\/strong\u003e: 7–14 days.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eApplication\u003c\/strong\u003e: smooth finish on indoor walls (combinable with Smooth Component A).\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eStorage conditions\u003c\/h3\u003e\n\u003cp\u003eStore in the original, tightly sealed container in a dry, ventilated place with a recommended temperature between \u003cstrong\u003e15 °C and 30 °C\u003c\/strong\u003e. Protect from direct sunlight, extreme temperatures, and moisture. Approximate shelf life: \u003cstrong\u003e1 year\u003c\/strong\u003e when properly stored.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781654651261,"sku":"TT01517","price":28.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Industtrial-B-03Kg.png?v=1776336173"},{"product_id":"componente-b-industtrial-2-09kg-lq-adr","title":"Component B Industtrial 2,09Kg LQ ADR","description":"\u003cp\u003e\u003cstrong\u003eComponent B Industtrial\u003c\/strong\u003e is the essential hardener for Topciment's two-component epoxy microcement system, \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-epoxi-para-pavimento-continuo-interior-industtrial#que-es-atlanttic\"\u003eIndusttrial\u003c\/a\u003e\u003c\/strong\u003e. This component acts as a curing agent for \u003cstrong\u003e\u003ca href=\"https:\/\/www.topciment.com\/es\/microcemento\/microcemento-epoxi-para-pavimento-continuo-interior-industtrial#componentebc\"\u003eComponent A\u003c\/a\u003e\u003c\/strong\u003e, initiating the chemical process that hardens and stabilizes the coating.\u003c\/p\u003e\u003cp\u003eThanks to its polyaminoamide-based formulation, it allows for the development of highly resistant, continuous, and seamless surfaces, ideal for demanding environments such as industrial, commercial, or high-traffic residential areas.\u003c\/p\u003e\u003cp\u003eWhen used with the epoxy finishes in the range (BASE, MEDIO, LISO, XL), it guarantees a durable finish with excellent mechanical performance and optimal chemical resistance. To protect the final system, it is recommended to apply sealers such as \u003cstrong\u003eTopsealer WT All in One\u003c\/strong\u003e or \u003cstrong\u003eTopsealer WT Dragon\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePolyaminoamide hardener formulated for epoxy applications.\u003c\/li\u003e\n\u003cli\u003eCompatible with all finishes of the Industtrial system.\u003c\/li\u003e\n\u003cli\u003eFacilitates uniform and efficient microcement curing.\u003c\/li\u003e\n\u003cli\u003eHigh chemical and mechanical resistance.\u003c\/li\u003e\n\u003cli\u003ePerfect integration with Topciment sealing systems.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation:\u003c\/strong\u003e\u003cbr\u003e Ensure the substrate is dry, clean, and properly primed with products such as \u003cstrong\u003ePrimacem Plus\u003c\/strong\u003e or \u003cstrong\u003ePrimapox® 100 Barrier\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing:\u003c\/strong\u003e\u003cbr\u003e Mix \u003cstrong\u003eComponent A Industtrial\u003c\/strong\u003e with \u003cstrong\u003eComponent B\u003c\/strong\u003e in a 4:1 ratio (by weight). Stir at low speed until a homogeneous mixture is achieved. Let it rest for 5 minutes before applying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003e Apply with a flexible metal trowel to the surface according to the desired epoxy system. The mixture has a pot life of 60 minutes. Do not apply at temperatures below 10 ºC or above 30 ºC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cbr\u003e Once cured, apply a protective varnish such as \u003cstrong\u003eTopsealer WT All in One\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe mixing ratio is 4:1 (A:B) by weight.\u003c\/li\u003e\n\u003cli\u003eFor every 4 kg of Component A, 1 kg of Component B is used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat:\u003c\/strong\u003e 2.09 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAppearance:\u003c\/strong\u003e Translucent liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity:\u003c\/strong\u003e 1.06 ± 0.01 g\/cm³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing ratio:\u003c\/strong\u003e 4:1 by weight (with Component A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life:\u003c\/strong\u003e 60 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e 10–30 ºC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStore in a cool, dry place.\u003c\/li\u003e\n\u003cli\u003eKeep in its original, closed, and unopened packaging.\u003c\/li\u003e\n\u003cli\u003eAvoid direct exposure to sunlight or heat sources.\u003c\/li\u003e\n\u003cli\u003eShelf life: 12 months.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781654749565,"sku":"TT01518","price":114.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/Industtrial-B-115Kg-2023.png?v=1776336161"},{"product_id":"natture-l-20kg","title":"Natture L 20Kg","description":"\u003cp\u003e\u003cstrong\u003eNatture® L 20 Kg\u003c\/strong\u003e is a \u003cstrong\u003etwo-component lime-based microcement\u003c\/strong\u003e, designed to achieve continuous thin finishes (1–3 mm) with a handmade appearance similar to \u003cstrong\u003etadelakt or exposed concrete\u003c\/strong\u003e. Its smooth texture, improved workability, and exceptional hardness make it the ideal choice for decorative coatings on floors and walls with high visual impact, combining natural aesthetics with durability for both interior and exterior use.\u003c\/p\u003e\u003cp\u003eThis product is part of the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Natture\"\u003eNatture®\u003c\/a\u003e range, developed to provide excellent adhesion on multiple substrates and allow for refined finishes thanks to its exclusive composition of lime, selected aggregates, and Acricem® resin, resulting in personalized, handcrafted, and contemporary aesthetic outcomes.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Characteristics\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwo-component lime-based microcement in powder form (component A).\u003c\/li\u003e\n\u003cli\u003eHandmade texture, refined tadelakt\/exposed concrete finish.\u003c\/li\u003e\n\u003cli\u003eApplicable in layers of 1 to 3 mm, ideal for continuous coatings.\u003c\/li\u003e\n\u003cli\u003eHigh mechanical resistance and durability.\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion on concrete, mortars, ceramics, plaster, MDF, and plasterboard.\u003c\/li\u003e\n\u003cli\u003eCompatible with matte, satin, or gloss finishes.\u003c\/li\u003e\n\u003cli\u003eGreat workability when wet, allows \"wet on wet\" application without imperfections.\u003c\/li\u003e\n\u003cli\u003eFormat: 20 kg bag (component A).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePrepare the substrate: clean, dry, and firm. Reinforce cracks and apply Builtex mesh if necessary.\u003c\/li\u003e\n\u003cli\u003ePrime absorbent surfaces with \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Primacem%C2%AE+ABS\"\u003ePrimacem® ABS\u003c\/a\u003e or non-absorbent surfaces with \u003ca href=\"https:\/\/www.topciment.shop\/p\/primacem-r-plus-5l\"\u003ePrimacem® PLUS.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMix 20 kg of Natture L with 6.6 L of \u003ca href=\"https:\/\/www.topciment.shop\/search?q=ACRICEM\"\u003eAcricem®\u003c\/a\u003e resin (component B) and colorants if applicable.\u003c\/li\u003e\n\u003cli\u003eStir with a low-speed mixer for at least 4 minutes until a homogeneous mixture is obtained.\u003c\/li\u003e\n\u003cli\u003eFor floors, first place the mesh and apply 2 coats of Natture L with a trowel; between coats, allow to dry for ~4 hours and sand lightly.\u003c\/li\u003e\n\u003cli\u003eIf desired, apply a final \"wet on wet\" coat and sand after drying.\u003c\/li\u003e\n\u003cli\u003eOnce hardened (24–48 hours), seal with \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer%C2%AE+WT\"\u003eTopsealer® WT\u003c\/a\u003e according to the desired finish.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApproximately \u003cstrong\u003e1.4 kg\/m²\u003c\/strong\u003e per coat (2 coats in total).\u003c\/li\u003e\n\u003cli\u003eFinal coverage: approximately \u003cstrong\u003e2.8 kg\/m²\u003c\/strong\u003e (2 coats).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum grain size\u003c\/strong\u003e: 0.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder density\u003c\/strong\u003e: 1175 ± 50 kg\/m³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaste density\u003c\/strong\u003e: 1480 ± 50 kg\/m³\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness at 28 days\u003c\/strong\u003e: compression ≥ 60 N\/mm²; flexural ≥ 10 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion\u003c\/strong\u003e: ≥ 1.5 N\/mm²\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReaction to fire\u003c\/strong\u003e: BFL s1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003epH\u003c\/strong\u003e: neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFormat\u003c\/strong\u003e: 20 kg (component A)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in its original packaging, in a dry, ventilated place, protected from humidity. Recommended temperature between 10 °C and 30 °C. Shelf life: up to \u003cstrong\u003e24 months\u003c\/strong\u003e from the date of manufacture when properly stored.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781655011709,"sku":"TT01602","price":124.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/natture-l.jpg?v=1779805673"},{"product_id":"natture-xl-20kg","title":"Natture XL 20kg","description":"\u003cp\u003eNatture XL is a two-component lime-based microcement that acts as a base coat in low-thickness continuous decorative coatings. This product is specially formulated to achieve artisanal finishes such as tadelakt effect or exposed concrete, thanks to its coarser aggregate. Its excellent workability, hardness, and adherence to multiple substrates make it an ideal option for both interior and exterior applications, on floors, walls, ceilings, stairs, and furniture.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eAllows for artisanal finishes such as tadelakt or exposed concrete style.\u003c\/li\u003e\n\u003cli\u003eHigh mechanical resistance and excellent workability.\u003c\/li\u003e\n\u003cli\u003eVersatile application on substrates such as concrete, ceramic, plaster, plasterboard, or MDF.\u003c\/li\u003e\n\u003cli\u003eSeamless continuous product, ideal for large surfaces.\u003c\/li\u003e\n\u003cli\u003ePart of the Natture system along with Microfino, Microdeck, and other aggregate sizes.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate preparation\u003c\/strong\u003e: The surface must be clean, dry, level, and with good adhesion. It is recommended to apply an appropriate primer depending on the type of substrate (Primacem Plus, ABS, or Primapox Barrier with Builtex mesh).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing\u003c\/strong\u003e: Mix component A (powder) with component B (Acricem resin) in a ratio of 20 kg of powder per 6 L of resin. A low-speed mechanical stirrer should be used until a homogeneous mixture is obtained.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Apply with a metal trowel in one or two coats, allowing a minimum drying time of 4 hours between them. To achieve a tadelakt effect, leave the porosity open; for an exposed concrete effect, close completely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying\u003c\/strong\u003e: After complete drying, sand the surface before applying the next coat or the finish microcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing\u003c\/strong\u003e: It is recommended to protect the system with Topsealer WT to improve resistance to water, stains, and traffic.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eYield\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eApproximately 2.00 kg\/m² in two coats.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximum aggregate size: 0.4 mm\u003c\/li\u003e\n\u003cli\u003ePowder density: 1.175 ± 0.050 g\/cm³\u003c\/li\u003e\n\u003cli\u003eCompressive strength (28 days): 49.7 MPa\u003c\/li\u003e\n\u003cli\u003eFlexural strength (28 days): 13.4 MPa\u003c\/li\u003e\n\u003cli\u003eAdhesion to substrate: ≥ 1.5 MPa\u003c\/li\u003e\n\u003cli\u003eFormat: 20 kg container\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage Conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore in the original closed container, in a dry place protected from humidity and direct sunlight, between 5 °C and 30 °C. Shelf life: 12 months from the date of manufacture.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781655110013,"sku":"TT01603","price":124.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/natture-xl_91_1_93.png?v=1779805602"},{"product_id":"natture-m-18kg","title":"Natture M 18kg","description":"\u003cp\u003e\u003cstrong\u003eNatture® M 18 Kg\u003c\/strong\u003e is a \u003cstrong\u003etwo-component tadelakt microcement with a fine finish\u003c\/strong\u003e, ideal for creating continuous, highly aesthetic coatings on floors, walls, and architectural furniture. Its smooth texture and handcrafted finish provide a natural tadelakt or exposed concrete effect, combining elegance and resistance for interior and exterior projects. It belongs to the \u003ca href=\"https:\/\/www.topciment.shop\/search?q=natture\"\u003eNatture®\u003c\/a\u003e range, specially formulated for refined thin-layer finishes.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eMain features\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSilky, natural finish with a handcrafted appearance. \u003c\/li\u003e\n\u003cli\u003eApplicable in layers of 1–3 mm, suitable for walkable and non-walkable areas. \u003c\/li\u003e\n\u003cli\u003eHigh mechanical hardness, low shrinkage, and excellent abrasion resistance. \u003c\/li\u003e\n\u003cli\u003eVery good adhesion to concrete, ceramic, plaster, MDF, plasterboard, and mortar. \u003c\/li\u003e\n\u003cli\u003eAllows for matte, satin, or gloss finishes depending on sanding and sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003ePrepare the substrate: clean, dry, firm; reinforce with mesh if necessary. \u003c\/li\u003e\n\u003cli\u003eApply appropriate primer (Primacem ABS\/PLUS or Primapox depending on the substrate). \u003c\/li\u003e\n\u003cli\u003eMix 18 kg of component A with the corresponding volume of Acricem® B resin, and optionally pigments. \u003c\/li\u003e\n\u003cli\u003eMix at low speed for about 4 minutes until a homogeneous mixture is obtained. \u003c\/li\u003e\n\u003cli\u003eApply with a trowel in one or more coats, allowing to dry and sanding between coats to achieve a smooth finish. \u003c\/li\u003e\n\u003cli\u003eFinally, seal with \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Presealer\"\u003ePresealer\u003c\/a\u003e and \u003ca href=\"https:\/\/www.topciment.shop\/search?q=Topsealer%C2%AE\"\u003eTopsealer®\u003c\/a\u003e products according to the desired finish. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003ePerformance\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eApproximately 1 Kg\/m² per coat, total estimated yield in two coats: 2 Kg\/m². \u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximum grain size: 0.2 mm \u003c\/li\u003e\n\u003cli\u003eApplication thickness: 1–3 mm \u003c\/li\u003e\n\u003cli\u003eCompressive strength (28 days): approximately 43.9 MPa \u003c\/li\u003e\n\u003cli\u003eFlexural strength (28 days): approximately 12.7 MPa \u003c\/li\u003e\n\u003cli\u003eMinimum adhesion: ≥ 1.2 N\/mm² \u003c\/li\u003e\n\u003cli\u003eContinuous seamless finish \u003c\/li\u003e\n\u003cli\u003eFormat: 18 Kg \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eStore the product in its original sealed container, in a dry, ventilated place protected from sunlight, at temperatures between 10 °C and 30 °C. Maximum shelf life: 12 months from the manufacturing date.\u003c\/p\u003e","brand":"Topciment","offers":[{"title":"Default Title","offer_id":57781655175549,"sku":"TT01605","price":112.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/8687\/5005\/files\/NATTURE-M-2023.jpg?v=1779805485"}],"url":"https:\/\/topciment.shop\/en\/collections\/all.oembed?page=2","provider":"topciment.shop","version":"1.0","type":"link"}